Bifold doors are glazed panels that fold and stack to one side to open up a wide gap, while sliding doors glide past each other on tracks; both connect a living space to the garden and bring in more daylight.
For a homeowner in Reigate, planning bifold or sliding doors tends to begin with two questions: what will it cost, and how disruptive will it be? Our guide range is £3,400–£9,000 including VAT, and a typical job runs to 1–2 days to fit into a ready opening. Both numbers firm up once we have seen the property, measured up and agreed exactly what is included.
- Guide price
- £3,400–£9,000 inc VAT
- Time on site
- 1–2 days to fit into a ready opening
- Postcodes
- RH1 and RH2
- Planning rules
- England
- Local area
- Surrey
- Survey
- Free, with a written quote
How much do bifold or sliding doors cost in Reigate?
What should you budget for bifold or sliding doors in Reigate? Use the figures below as a starting point. Prices in the South East sit about 12% above the national guide, so the range here is £3,400–£9,000 including VAT. Your fixed price comes in writing once we've surveyed the property, at no charge.
| Type of job | What it usually involves | Guide in Reigate |
|---|---|---|
| uPVC sliding or French doors | Standard uPVC doors fitted into an existing opening of up to about 2m. | £1,700–£3,400 |
| 3m aluminium bifold | A three-panel aluminium bifold in a standard colour, fitted into a ready opening. | £3,900–£7,800 |
| Wide bifold or slimline slider | Openings of 4m or more and slim-frame doors, often with a new steel above. | £7,800–£15,500 |
The main things that change the figure:
- Width and height of the opening and number of panels
- Glazing upgrades such as solar control or triple glazing
- Widening the opening with a new steel beam
- Threshold type, colour choice and built-in blinds
What does the job include in Reigate?
- Measured survey of the opening, lintel and floor levels
- Toughened double glazing as standard, with solar control options
- Removal of existing doors or windows and disposal of waste
- Opening widened with a new lintel or steel where agreed
- Weather seals, cills and internal trims finished neatly
- Building regulations sign-off arranged for the new doors
Local housing and bifold or sliding doors
Surrey has many Victorian and Edwardian villas, interwar semis in the commuter towns near London, and Arts and Crafts houses with tile-hanging and tall chimneys. Bargate stone appears around Godalming, and large detached homes are common in Guildford, Woking, Weybridge and the Surrey Hills villages.
Larger homes often take kitchen extensions, bifold doors, landscaping and driveway renewal. Interwar semis suit loft and side extensions, while tile-hung and period properties may need roof and hanging-tile repairs.
So when we survey a Reigate property for bifold or sliding doors, the first step is working out how it was built and what has been changed since.
Permissions for bifold or sliding doors in Reigate
Which rules apply depends on where you live. For Reigate, the answer is England, and the points below reflect that; we verify them with the council before quoting.
Replacing windows and doors on a house is usually permitted development in England when the new ones look broadly similar to the old. Flats, listed buildings and homes covered by an Article 4 direction can need consent, and conservation areas may limit materials or styles.
Replacement windows and external doors must meet Building Regulations for energy efficiency, ventilation and, on upper floors, escape. The work is either self-certified by an installer registered with a competent person scheme or signed off by building control.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
From survey to handover
Survey and measure
Book a visit and we'll come to you. The survey covers measurements, the state of what's there now and any obvious constraints, so the price that follows is based on your actual home, not an average.
Your fixed price
You get the price in writing, itemised so you can see where the money goes. As long as the specification stays the same, that is the price you pay for bifold or sliding doors.
Dates and permissions
Once you accept, we agree start dates, order materials and deal with any planning, building control or neighbour notices the job needs. You'll know who is coming and when before work begins.
On site to finish
The job proceeds in the order set out in the programme, with dust and debris kept under control. Finally we tidy away, inspect the work together and pass the finished project over to you with its paperwork.
What you can expect from us
Common questions
How do I maintain bifold doors?
Bifold doors need simple, regular care to keep them running smoothly. Vacuum or brush grit out of the bottom track every few weeks, wipe the frames with warm soapy water and avoid abrasive cleaners. Once or twice a year, lubricate the rollers, hinges and locks with a silicone spray. If the panels start to drop or catch, the hinges can usually be adjusted rather than replaced.
Who do I deal with during the job?
One point of contact manages your project from survey to handover. They schedule the trades working under our contract, keep you updated on progress, and are the person to call with any question. You don't need to coordinate builders, electricians or decorators separately, because that is part of what we do.
How much do bifold doors cost?
Bifold doors cost £3,400–£9,000 for a typical 3m opening, supplied and fitted. As a rough guide, allow around £900–£2,000 per metre of width plus the fixed costs of fitting, depending on frame material and glass. uPVC sits at the lower end and slimline aluminium at the top. Widening the opening with a new steel adds to the price. We confirm a fixed figure after measuring.
Do you cover Redhill, Horley and Banstead?
Yes. As well as Reigate, we cover Redhill, Horley and Banstead and the rest of Surrey. Our coverage is UK-wide, so the process is the same wherever you are: a free site survey, a quote in writing that fixes the price for the agreed scope, and one point of contact while the work is planned and carried out.
Can you fit bifold doors where I have a window now?
Bifold doors can usually replace a window by cutting the wall down to floor level and, if the opening is being widened, fitting a new lintel or steel beam. A structural engineer sizes the beam, and building control approval is needed. Radiators, pipes and cables under the window may need moving. We check all of this at the survey and include it in a single written quote.
Nearby towns
We cover every part of Reigate, including RH1 and RH2, and nearby Redhill, Horley and Banstead. Wherever you are within that patch, the survey is free and the quote comes to you in writing.