Repointing is raking out old, crumbling mortar from between bricks and replacing it with fresh mortar, sealing the joints against rain and protecting the wall; brickwork repairs replace spalled or cracked bricks and rebuild damaged sections.
If you have brickwork and repointing on your list for a property in Market Harborough, we can help from the first measurements to the final clean-up. For a typical home, plan for 3–10 days for a typical house, though larger or more complex jobs take longer. We cover postcodes LE16 and nearby Corby, Kettering and Wigston, and every quote we send is fixed for the scope described in it.
- Guide price
- £2,400–£5,800 inc VAT
- Time on site
- 3–10 days for a typical house
- Postcodes
- LE16
- Planning rules
- England
- Local area
- Northamptonshire
- Survey
- Free, with a written quote
How much does brickwork and repointing cost in Market Harborough?
Here is how the guide price for brickwork and repointing breaks down in Market Harborough. We start from national figures and adjust for the East Midlands, which comes out about 4% below the national guide. The resulting range, VAT included, is £2,400–£5,800, and a survey, at no cost to you, firms it up.
| Type of job | What it usually involves | Guide in Market Harborough |
|---|---|---|
| Chimney or small area | Repointing a chimney stack, gable or single wall, including access. | £600–£1,750 |
| Typical semi-detached | Repointing the main elevations of a 3-bed semi, including scaffolding. | £2,400–£5,800 |
| Detached or lime work | Larger houses, or period homes repointed in lime with brick repairs. | £4,800–£9,600 |
Your price depends mostly on:
- Wall area to repoint and the height of the house
- Mortar type: cement or lime, and joint style
- Number of bricks to replace and how well they match
- Condition of the existing mortar and how hard it is to remove
What does the job include in Market Harborough?
- Scaffolding or access towers where needed
- Raking out old mortar to the correct depth
- Mortar mixed to suit the wall, in lime or cement
- Colour and joint style matched as closely as possible
- Replacement of spalled or cracked bricks
- Waste removal and a tidy site
Building in Market Harborough
Orange-brown ironstone is the signature material of many Northamptonshire villages, with limestone and Collyweston stone-slate roofs in the north-east. Northampton has Victorian terraces from its shoemaking era, Corby expanded as a post-war steel town, and Wellingborough, Kettering and Daventry have interwar, post-war and recent estates.
Ironstone cottages often need lime repairs and careful repointing. Terraces suit loft conversions and kitchen extensions, while estate homes commonly take garage conversions, porches and driveways.
If your house in Market Harborough fits one of these patterns, it helps us anticipate what brickwork and repointing will involve, though we always confirm the details on site.
Do you need permission in Market Harborough?
Because Market Harborough falls under England's rules, the guidance below is the version relevant to you. Before sending a price, we check your property's position with the council.
Repointing and repairing brickwork with matching materials is maintenance, so it does not need planning permission in England. On a listed building, work that affects its character, including a change of mortar or brick, may need listed building consent.
Building Regulations do not normally apply to repointing or brick repairs, but rebuilding a wall, chimney or structural section can need building control involvement.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
How does the job run?
Survey and measure
We arrange a free site survey on a date convenient to you. We measure up, look at the existing structure and access, and discuss your plans for brickwork and repointing so the price reflects your home.
Price and scope agreed
You get the price in writing, itemised so you can see where the money goes. As long as the specification stays the same, that is the price you pay for brickwork and repointing.
Booking the work
Before anyone starts, we confirm the programme in writing, check whether consents are required and arrange deliveries. If a skip or scaffolding on the road needs a permit, we apply for it.
Build and hand over
The work is carried out to the agreed specification, with floors and furniture protected and the site kept tidy. At the end we clean up, walk through the finished job with you and hand over any certificates.
How we work
Common questions
Should my house be repointed with lime or cement?
Houses built before about the 1920s were usually built with soft bricks and lime mortar, and should normally be repointed in lime. Hard cement mortar in these walls traps moisture and can cause the brick faces to crumble. Newer homes built with cement mortar are usually repointed in a similar mix. We check your wall construction before recommending a mortar.
What causes bricks to crumble?
Bricks usually crumble, or spall, when water gets into them and turns to ice, pushing the face off. This is often caused by hard cement mortar or impermeable paint trapping moisture in soft bricks, or by leaking gutters soaking the wall. Damaged bricks can be cut out and replaced with matching ones, or turned round if the back face is sound. We fix the cause at the same time.
Do you cover Corby, Kettering and Wigston?
Yes. As well as Market Harborough, we cover Corby, Kettering and Wigston and the rest of Northamptonshire. Our coverage is UK-wide, so the process is the same wherever you are: a free site survey, a quote in writing that fixes the price for the agreed scope, and one point of contact while the work is planned and carried out.
Will repointing cure damp?
Repointing can stop damp caused by rain getting through failed mortar joints, which is common on exposed walls. It will not fix damp from leaking gutters, a bridged damp-proof course, condensation or high ground levels against the wall. We look for the cause during the survey and recommend fixing that, so repointing is not done for the wrong reason.
Which postcodes in Market Harborough do you cover?
We cover LE16, along with the rest of Northamptonshire. If your postcode is not listed, get in touch anyway: our coverage is UK-wide, and we can usually arrange a survey wherever you live. Enter your postcode in the guide-price tool or contact form and we will confirm.
Near Market Harborough
We welcome enquiries from all LE16 postcodes in Market Harborough, plus Corby, Kettering and Wigston. Each one gets the same survey at no charge and a written price fixed for the work described.