Cladding is a protective outer layer of boards or panels, such as timber, composite, fibre cement or uPVC, fixed to battens on the outside of a wall to change its appearance, shed rain and, where insulation is added, reduce heat loss.
Cost is usually the first question about cladding, so here is the guide for Scotland: £4,800–£11,500 including VAT. We cover the whole of Perth and Kinross, with Perth, Blairgowrie, Crieff and Auchterarder among the main centres. Because each UK nation sets its own rules, we check the requirements in Scotland for your property, then put a firm price on paper following a free survey.
- Guide price
- £4,800–£11,500 inc VAT
- Time on site
- 3 days to 3 weeks depending on area
- Planning rules
- Scotland
- Price level
- About 4% below the national guide
- Towns listed
- 4
- Survey
- Free, with a written quote
Cladding prices in Perth and Kinross
What will cladding cost in Perth and Kinross? Our guide range is £4,800–£11,500 including VAT. That figure is adjusted for Scotland, about 4% below the national guide, and is intended for planning a budget. A firm written price for your chosen specification follows a free survey at your home.
| Type of job | What it usually involves | Guide in Perth and Kinross |
|---|---|---|
| Feature area or dormer | A gable, dormer, bay or small feature wall in uPVC, timber or composite. | £1,450–£4,800 |
| Extension or upper storey | About 40–60m² of timber, composite or fibre cement with membrane and battens. | £4,800–£11,500 |
| Whole house | Cladding most elevations of a house, often with added insulation. | £11,500–£29,000 |
Your price depends mostly on:
- Wall area to be clad and the height of the building
- Cladding material and board profile
- Insulation behind the cladding
- Scaffolding, access and distance from boundaries
Scope of the work
- Scaffolding or access towers as needed
- Breather membrane and treated battens fixed to the wall
- Cavity barriers and fire-stopping where regulations require
- Cladding boards fixed with suitable stainless or coated fixings
- Corner trims, window reveals and ventilated top and bottom edges
- Waste removal and a clean site on completion
Homes in Perth and Kinross
Perth has Georgian terraces and Victorian sandstone villas, Highland Perthshire towns such as Pitlochry and Aberfeldy have stone villas and cottages, and Kinross and Crieff mix older stone housing with post-war and modern estates. Slate roofs and harled finishes are common in rural areas.
Sandstone villas in Perth and Highland Perthshire often need repointing and slate roof repairs, and many sit in conservation areas. Semis and newer homes commonly take extensions, garage conversions and garden landscaping.
Inland areas get hard frosts and snow on higher ground, and the Tay and its tributaries have a history of flooding.
Do you need permission in Perth and Kinross?
Homes in Perth and Kinross come under the regulations for Scotland, summarised below. We don't rely on general rules alone: we confirm the position for your address with the council before a quote goes out.
In Scotland, changing the external finish of a house in a conservation area or on a listed building needs consent; elsewhere, like-for-like re-rendering is usually treated as repair.
Large-scale re-cladding or external insulation can need a building warrant; like-for-like render repairs normally do not.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
How does the job run?
Survey and measure
We arrange a free site survey on a date convenient to you. We measure up, look at the existing structure and access, and discuss your plans for cladding so the price reflects your home.
Your fixed price
Next you receive a written quote with a fixed price for the agreed specification. It lists what is included, what is not, and how payments are staged, so you can compare it properly.
Plan and prepare
We handle the paperwork side: checking whether planning permission or building control approval is needed, submitting applications where they are, and scheduling the trades and materials around your dates.
Build and hand over
The job proceeds in the order set out in the programme, with dust and debris kept under control. Finally we tidy away, inspect the work together and pass the finished project over to you with its paperwork.
How we work
Questions about cladding in Perth and Kinross
Are there fire-safety rules for cladding?
Building regulations limit the fire-spread performance of cladding on walls close to a boundary and on taller buildings, which can rule out some timber or composite products in those positions. Cavity barriers behind the cladding also help stop fire spreading through the gap. Fibre cement is non-combustible. We check boundary distances and product data before recommending a material.
Do you cover Perth, Blairgowrie and Crieff?
Yes. As well as Perth and Kinross, we cover Perth, Blairgowrie and Crieff and the rest of Perth and Kinross. Our coverage is UK-wide, so the process is the same wherever you are: a free site survey, a quote in writing that fixes the price for the agreed scope, and one point of contact while the work is planned and carried out.
Which cladding material needs the least maintenance?
Fibre cement, composite and uPVC cladding need the least upkeep, usually just an occasional wash. Thermally modified and hardwood timber can be left to weather naturally to a silver-grey, which needs no treatment, but keeping the original colour means re-staining every few years. Painted timber needs repainting regularly. We explain the long-term care of each option.
How much does house cladding cost?
Cladding around 40–60m² of wall, such as an extension or upper storey, costs £4,800–£11,500, including membrane, battens and trims. As a guide, allow roughly £80–£180 per square metre plus fixed costs for scaffolding and set-up. uPVC and softwood sit at the lower end, while hardwood, composite and fibre cement cost more. Adding insulation increases the price. We confirm a fixed figure after the survey.
How much will cladding cost in Perth and Kinross?
As a guide, expect to pay £4,800–£11,500 including VAT for cladding in Perth and Kinross. That range is adjusted for Scotland, which runs about 4% below the national guide. Where your project lands depends on size, materials, access and the condition of what is already there. We confirm a fixed price in writing after a free survey of your home.
Towns in Perth and Kinross
These are the towns in Perth and Kinross where you can book a free survey for cladding. Each has its own page with guide prices and coverage details.