A new driveway is a hard-wearing surface for parking, such as block paving, resin bound gravel, tarmac or gravel, laid on an excavated and compacted sub-base with edging and drainage designed to carry vehicle loads and handle rainwater.
Getting a new driveway right in Billingham starts with understanding the house you already have: its age, how it was built and what has been altered over the years. We survey first, then commit on paper to a price that holds as long as the scope stays the same. Across the North East, guide prices run at £3,600–£8,100 including VAT, and homes in Stockton-on-Tees, Middlesbrough and Thornaby-on-Tees are covered too.
- Guide price
- £3,600–£8,100 inc VAT
- Time on site
- 3–7 days on site
- Postcodes
- TS23
- Planning rules
- England
- Local area
- Stockton-on-Tees
- Survey
- Free, with a written quote
How much does a new driveway cost in Billingham?
The table below shows guide prices for a new driveway in Billingham. They are based on rates in the North East, which run about 10% below the national guide, giving an overall range of £3,600–£8,100. All figures include VAT and are firmed up after a free site survey.
| Type of job | What it usually involves | Guide in Billingham |
|---|---|---|
| Gravel or tarmac | A typical 40–50m² drive in gravel on a grid, or tarmac with block edging. | £1,800–£4,500 |
| Block paving or resin bound | A typical 40–50m² drive with sub-base, edging and drainage. | £3,600–£8,100 |
| Large or premium driveway | Larger drives, natural stone, walls, steps or a new dropped kerb. | £7,200–£14,500 |
Your price depends mostly on:
- Surface: gravel, tarmac, block paving, resin or stone
- Drainage, soakaways and changes in level
- Edging, steps, walls and manhole adjustments
- Access for machinery and removal of spoil
What’s included?
- Survey of levels, drainage, manholes and access
- Weed membrane and compacted MOT Type 1 sub-base
- Edging kerbs or restraints to hold the surface in place
- Drainage channels or soakaway where needed
- New surface laid, compacted and finished
- Site cleared and waste removed
Local housing and a new driveway
Colliery villages across County Durham are lined with brick and stone terraces, many built for mining families. Durham City has Georgian and Victorian streets, Darlington has Victorian terraces and villas, and Peterlee and Newton Aycliffe were planned as post-war new towns. Dales farmhouses in Weardale and Teesdale are stone, often under stone or slate roofs.
Colliery terraces commonly suit loft rooms, rear extensions and window replacement, and many need repointing. New-town homes often benefit from rendering or cladding upgrades and roofline renewal, while stone farmhouses may need lime work.
Building traditions across County Durham also raise conservation and planning questions, so we check those for a new driveway in Billingham at the survey stage.
Do you need permission in Billingham?
For anyone in Billingham, the relevant framework is England's. The summary below is general, so we always contact the council about your address before putting a price in writing.
In England, a new or replacement front-garden surface over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your property. A new dropped kerb needs consent from the council’s highways team, and access onto a classified road may need planning permission.
Building Regulations do not usually apply to driveways, but drainage must not discharge onto the road or a neighbour’s land.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
What happens after you get in touch?
We look at the job
Book a visit and we'll come to you. The survey covers measurements, the state of what's there now and any obvious constraints, so the price that follows is based on your actual home, not an average.
Written quote
Next you receive a written quote with a fixed price for the agreed specification. It lists what is included, what is not, and how payments are staged, so you can compare it properly.
Plan and prepare
Next comes planning the work itself. We set a start date that suits you, line up the right trades, and make sure any approvals for a new driveway are in place before the first day on site.
On site to finish
During the work we protect the areas around it and tidy up at the end of each day. Once complete, we check the finish, remove our materials and hand over paperwork such as building control sign-off where it applies.
What you can expect from us
Questions about a new driveway in Billingham
Do I need permission for a dropped kerb?
A dropped kerb lets vehicles cross the pavement onto your drive, and creating or widening one needs consent from your local highways authority. They usually check visibility, the distance from junctions and trees, and whether there is enough space to park off the road. Many councils carry out the kerb work themselves or use approved contractors. We can help with the application.
How much does a new driveway cost?
A typical 40–50m² block paved or resin bound driveway costs £3,600–£8,100, including excavation, sub-base, edging and drainage. As a guide, allow roughly £70–£150 per square metre plus fixed costs for machinery and waste. Gravel and tarmac cost less, while natural stone, steps and walls cost more. A new dropped kerb is a separate cost. We confirm a fixed price after measuring.
Do I need planning permission in Billingham?
It depends on the work, the size of the project, your property type and whether the building is listed or in a conservation area. Billingham is in England, so England's rules apply. Many smaller jobs need no planning application, but some still need building control approval. We check what applies to your address before quoting.
Which postcodes in Billingham do you cover?
We cover TS23, along with the rest of County Durham. If your postcode is not listed, get in touch anyway: our coverage is UK-wide, and we can usually arrange a survey wherever you live. Enter your postcode in the guide-price tool or contact form and we will confirm.
How do you stop a driveway flooding?
A driveway stays dry when rainwater can drain away rather than pooling or running towards the house. Permeable surfaces such as resin bound gravel or permeable block paving let water soak through to the ground. Non-permeable surfaces need falls directing water to a channel drain, soakaway or garden border. We check levels and drainage during the survey and design the falls accordingly.
Near Billingham
Coverage for Billingham spans TS23. Close by, Stockton-on-Tees, Middlesbrough and Thornaby-on-Tees are covered too, and the rest of our UK-wide area follows the same survey-then-quote process from start to finish.