Dyfed · Landscaping & Outdoor Spaces

Fencing and gates in Aberystwyth

Local guide: £1,100–£2,800 inc VAT. Planning notes for Wales, a free survey and one point of contact.

New close-board timber fence with concrete posts and a side gate

Free survey in Aberystwyth

Tell us about the job and we will be in touch to arrange a visit.

Prefer to talk? Call 0800 088 6341 or start a live chat.

Fencing installation is setting fence posts into the ground, usually in concrete, and fixing panels or boards between them to mark a boundary, add privacy or keep children and pets in, with gates fitted where access is needed.

Getting new fencing and gates right in Aberystwyth starts with understanding the house you already have: its age, how it was built and what has been altered over the years. We survey first, then commit on paper to a price that holds as long as the scope stays the same. Across Wales, guide prices run at £1,100–£2,800 including VAT, and homes in Newtown, Carmarthen and Welshpool are covered too.

Guide price
£1,100–£2,800 inc VAT
Time on site
1–3 days for a typical garden
Postcodes
SY23
Planning rules
Wales
Local area
Ceredigion
Survey
Free, with a written quote

How much do new fencing and gates cost in Aberystwyth?

No two jobs cost exactly the same, but the ranges below give a fair picture of new fencing and gates in Aberystwyth. Pricing for Wales runs about 8% below the national guide, and the overall guide is £1,100–£2,800 with VAT included. We'll confirm your figure after surveying the property for free.

Type of jobWhat it usually involvesGuide in Aberystwyth
Repairs or a short runReplacing a few panels and posts, or a short run of up to about 6m.£300–£850
Typical garden boundaryAbout 20m of panel or closeboard fencing with concrete posts and gravel boards.£1,100–£2,800
Composite or long runs with gatesComposite or premium fencing, longer runs, or a driveway gate.£2,800–£6,400

The main things that change the figure:

  • Total length and height of fencing
  • Fence style and material: panels, closeboard or composite
  • Ground conditions, slopes and removal of the old fence
  • Number, size and type of gates

What does the job include in Aberystwyth?

  • Removal and disposal of the old fence and posts
  • Concrete or timber posts set in concrete
  • Concrete or timber gravel boards to keep panels off the soil
  • Post caps and capping rails where specified
  • Gates hung with hinges, latches and locks
  • Site cleared and waste removed
Lap or overlap panelsLower-cost panels for marking boundaries, quick to install.
Closeboard or featheredgeVertical boards on rails, strong and solid for privacy and exposed sites.
Composite fencingLow-maintenance boards in aluminium or concrete posts that do not rot or need painting.
Side and driveway gatesTimber, metal or composite gates with secure latches and locks.

Building in Aberystwyth

Dyfed covers Carmarthenshire, Ceredigion and Pembrokeshire. Stone cottages and farmhouses under slate roofs are common, often rendered or colour-washed, as in Tenby's brightly painted terraces. Llanelli has Victorian industrial terraces, Aberystwyth and Carmarthen have Georgian and Victorian centres, and bungalows and newer estates surround most towns.

Atlantic weather brings strong winds, driving rain and salt to the coast, so exposure ratings matter when specifying render and pointing.

For new fencing and gates in Aberystwyth, this means checking things like wall construction, roof structure and existing services before we put a figure on paper.

Do you need permission in Aberystwyth?

For anyone in Aberystwyth, the relevant framework is Wales's. The summary below is general, so we always contact the council about your address before putting a price in writing.

In Wales, fences, walls and gates up to 2 m high (1 m next to a road) are usually permitted development.

Building Regulations do not apply to ordinary fences.

Rules change and every property is different, so we check the planning history and constraints for your address before we quote.

The four stages

  1. Survey and measure

    We begin by looking at the job in person. During the free survey we discuss options, materials and budget for new fencing and gates, and photograph or measure anything the quote needs to reflect.

  2. Quote in writing

    You get the price in writing, itemised so you can see where the money goes. As long as the specification stays the same, that is the price you pay for new fencing and gates.

  3. Booking the work

    We handle the paperwork side: checking whether planning permission or building control approval is needed, submitting applications where they are, and scheduling the trades and materials around your dates.

  4. The work itself

    The job proceeds in the order set out in the programme, with dust and debris kept under control. Finally we tidy away, inspect the work together and pass the finished project over to you with its paperwork.

How we work

Written, fixed-price quotesYour quote states one fixed price for the work as we have specified it together, with inclusions and exclusions listed so there are no grey areas.
Tidy, protected work areasFloors, furniture and access routes are covered and protected while we work, and the site is tidied at the end of every working day.
Realistic timetablesWe give you an honest estimate of time on site at the quote stage and keep you informed if anything affects the programme once work starts.
A proper handoverAt the end we clear the site, show you round the finished work and pass on documents like a building control completion certificate.

Common questions

What happens at the survey?

We visit your home at a time that suits you, look at the area involved, take measurements and check access, condition and any services that might be affected. We talk through what you want from new fencing and gates, explain the options and answer questions. There is no charge and no obligation; afterwards we send a written quote.

How long does it take to replace a fence?

Replacing a typical 20m garden fence usually takes one to two days, including taking down the old fence, setting posts in concrete and fitting panels or boards. Longer runs, slopes, hard ground and gates take longer. Post concrete needs time to set before panels are fully loaded. We give you an expected timeline with your quote.

How do you fence a sloping garden?

On a sloping garden, fence panels are usually stepped, so each panel is level and set slightly higher or lower than the one before, with the gap below filled by a gravel board. Closeboard fences can instead follow the slope, giving a smooth top line. The choice depends on how steep the slope is and the look you want. We discuss both at the survey.

Who owns the fence between me and my neighbour?

Fence ownership is usually shown on the title plan or deeds, sometimes with a T mark on the side of the owner. If it is unclear, it may be shared. Even on your own boundary, it is sensible to talk to neighbours before replacing a fence, agree access and confirm the line. We fit the fence on the line you confirm and can face the good side outwards if you wish.

Do I need planning permission in Aberystwyth?

It depends on the work, the size of the project, your property type and whether the building is listed or in a conservation area. Aberystwyth is in Wales, so Wales's rules apply. Many smaller jobs need no planning application, but some still need building control approval. We check what applies to your address before quoting.

Also covering areas around Aberystwyth

We survey and quote throughout Aberystwyth's SY23 postcodes and in surrounding places such as Newtown, Carmarthen and Welshpool. The process and pricing approach are identical in each of them.

Ready for a written price?

Tell us a little about your home in Aberystwyth and what you have in mind for new fencing and gates. We'll arrange a site survey, free of charge, and put our price in writing.

Call freeFree quote