A flat roof replacement strips the old covering from a low-pitched roof and lays a new waterproof system, usually EPDM rubber, GRP fibreglass or torch-on felt, over a sound deck with correct falls, upstands, trims and outlets so rainwater drains away.
For a homeowner in Oakham, planning a new flat roof tends to begin with two questions: what will it cost, and how disruptive will it be? Our guide range is £1,900–£4,300 including VAT, and a typical job runs to 1–3 days for most roofs. Both numbers firm up once we have seen the property, measured up and agreed exactly what is included.
- Guide price
- £1,900–£4,300 inc VAT
- Time on site
- 1–3 days for most roofs
- Postcodes
- LE15
- Planning rules
- England
- Local area
- Rutland
- Survey
- Free, with a written quote
What should you budget for a new flat roof in Oakham?
Budgeting for a new flat roof in Oakham? The numbers below include VAT and are adjusted for the East Midlands, where costs are about 4% below the national guide. The headline range is £1,900–£4,300. Nothing is final until we have measured up at a free survey and agreed the specification with you.
| Type of job | What it usually involves | Guide in Oakham |
|---|---|---|
| Small roof (up to 8m²) | A dormer, bay, porch or small garage roof re-covered in EPDM or GRP. | £750–£1,900 |
| Extension or garage (15–25m²) | A typical extension or single garage roof stripped and re-covered. | £1,900–£4,300 |
| Large or new warm roof | Larger roofs, or roofs needing a new deck and insulation build-up. | £3,800–£8,600 |
Your price depends mostly on:
- Roof area and access to the roof
- Covering system: EPDM, GRP or torch-on felt
- Condition of the deck and joists underneath
- Number of rooflights, pipes and upstands to detail
What’s included?
- Stripping and disposal of the old roof covering
- Replacement of rotten or soft deck boards
- Insulation upgrade to a warm roof build-up where agreed
- New EPDM, GRP or torch-on felt membrane laid to falls
- Upstands, flashings and drip edges finished neatly
- New trims, outlets and gutter connections
Local housing and a new flat roof
England's smallest historic county is largely limestone and ironstone villages, many with Collyweston stone-slate or thatched roofs. Oakham and Uppingham have Georgian and Victorian centres within conservation areas, and newer estates and smaller post-war developments have grown on the edges of both towns.
Stone properties commonly need lime pointing, stone-slate roof repairs and windows suited to conservation areas. Newer homes suit extensions, garage conversions, driveways and garden landscaping, and planning-sensitive design is often part of the brief.
For a new flat roof in Oakham, this means checking things like wall construction, roof structure and existing services before we put a figure on paper.
Permissions for a new flat roof in Oakham
For anyone in Oakham, the relevant framework is England's. The summary below is general, so we always contact the council about your address before putting a price in writing.
Re-roofing a house with similar materials does not usually need planning permission in England. Listed buildings and conservation areas may need consent if the covering changes.
Replacing more than a quarter of a roof’s covering counts as renovation under Building Regulations, so the work is notified and the roof insulation may need upgrading. Bats are protected across the UK; if they roost under roof tiles, soffits or fascias, work stops and a licensed ecologist advises before it restarts.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
What happens after you get in touch?
A visit to your home
It starts with a survey at the property, free of charge. We check condition, access and services, ask how you want the finished result to look, and answer any questions you have about a new flat roof.
Price and scope agreed
After the survey we send a quote for a new flat roof that fixes the price for the scope we've agreed. If you want to change materials or scope, we revise it in writing before anything is booked.
Dates and permissions
Next comes planning the work itself. We set a start date that suits you, line up the right trades, and make sure any approvals for a new flat roof are in place before the first day on site.
Finish and handover
The work is carried out to the agreed specification, with floors and furniture protected and the site kept tidy. At the end we clean up, walk through the finished job with you and hand over any certificates.
Why homeowners choose us
Questions about a new flat roof in Oakham
Do you cover Melton Mowbray, Stamford and Corby?
Yes. As well as Oakham, we cover Melton Mowbray, Stamford and Corby and the rest of Rutland. Our coverage is UK-wide, so the process is the same wherever you are: a free site survey, a quote in writing that fixes the price for the agreed scope, and one point of contact while the work is planned and carried out.
Should I insulate my flat roof when it is replaced?
Replacing a flat roof is the most cost-effective time to add insulation, because the covering is already off. A warm roof, with insulation laid above the deck, keeps the structure warm and reduces condensation risk. Building regulations may require insulation when a large part of the roof is renewed. It raises the roof height slightly, which affects trims and upstands.
Can you repair my flat roof instead of replacing it?
A flat roof can often be repaired if the damage is limited to a small split, a failed joint or a loose upstand and the rest of the covering is sound. If the deck is soft, the covering is blistered or cracked across the roof, or leaks keep returning, replacement is usually better value. We assess the whole roof and give you an honest recommendation.
Can I stay at home during the work?
In most cases, yes. Most people can live at home throughout, and we plan the work to keep disruption down by protecting floors, agreeing working hours and keeping access routes clear. Bigger jobs affecting kitchens, bathrooms or heating may mean a short spell with reduced facilities, and we talk this through with you at the survey.
Which is better, EPDM rubber or GRP fibreglass?
EPDM rubber and GRP fibreglass are both reliable modern flat roof systems. EPDM is a single flexible sheet with very few joints, which copes well with movement and suits most extensions and garages. GRP is a hard, seamless finish that copes better with foot traffic and complex shapes, but needs dry weather to apply. Felt costs less but usually lasts less long. We recommend a system after seeing your roof.
Nearby towns
Addresses in LE15 are all covered for Oakham, along with Melton Mowbray, Stamford and Corby close by. Give us your postcode when you get in touch and we will confirm the details.