Ayrshire · Kitchens & Interiors

Flooring in Irvine

Local guide: £1,150–£3,800 inc VAT. Planning notes for Scotland, a free survey and one point of contact.

Herringbone oak-effect flooring being laid in a living room

Free survey in Irvine

Tell us about the job and we will be in touch to arrange a visit.

Prefer to talk? Call 0800 088 6341 or start a live chat.

Flooring installation is the supply and fitting of a new floor finish, such as laminate, luxury vinyl tile, engineered wood or solid wood, over a properly levelled and prepared subfloor, with underlay, trims and thresholds finished neatly.

We offer new flooring across Ayrshire, and Irvine is one of the places we cover, along with nearby Kilwinning, Kilmarnock and Ayr. Before anything is agreed we visit, check the existing structure and talk through your options. You then receive a written quote setting out the full scope; for most homes in Scotland it sits within £1,150–£3,800 including VAT.

Guide price
£1,150–£3,800 inc VAT
Time on site
1–2 days per room, longer if levelling is needed
Postcodes
KA11 and KA12
Planning rules
Scotland
Local area
North Ayrshire
Survey
Free, with a written quote

What should you budget for new flooring in Irvine?

Budgeting for new flooring in Irvine? The numbers below include VAT and are adjusted for Scotland, where costs are about 4% below the national guide. The headline range is £1,150–£3,800. Nothing is final until we have measured up at a free survey and agreed the specification with you.

Type of jobWhat it usually involvesGuide in Irvine
Laminate in one roomAround 15–20m² of laminate with underlay, trims and door trimming.£600–£1,750
LVT or engineered woodAround 20–25m² of LVT or engineered wood, with levelling and moisture protection.£1,150–£3,400
Whole floor or solid woodAn open-plan ground floor, solid wood or herringbone, with extensive preparation.£3,400–£8,600

Your price depends mostly on:

  • Floor area and the number of rooms, stairs and doorways
  • Flooring type, plank size and laying pattern
  • Lifting and disposing of existing floor coverings
  • Underfloor heating, moisture barriers and acoustic underlay

What does the job include in Irvine?

  • Measured survey of each room and checks on the subfloor
  • Lifting and disposal of old carpet, laminate or vinyl
  • Subfloor repairs, levelling compound or plywood overlay where needed
  • Damp-proof membrane and suitable underlay for your floor type
  • Supply and fitting of your chosen flooring
  • Threshold strips, scotia or skirting finished neatly
Luxury vinyl tile (LVT)Water-resistant and warm underfoot, ideal for kitchens, bathrooms and busy family rooms.
Engineered woodA real wood top layer on a stable core, suitable for underfloor heating.
Solid woodSolid timber boards that can be sanded and refinished many times over their life.
Herringbone or parquetSmall blocks laid in a pattern for a classic look, in wood, engineered wood or LVT.

Building in Irvine

Ayr, Kilmarnock and the coastal towns from Largs to Girvan have Victorian sandstone villas and terraces, with red sandstone common in older buildings. Former mining villages have rows of cottages, Irvine was developed as a new town from the 1960s, and harled post-war houses and newer estates are found across the area.

The Firth of Clyde coast is exposed to westerly winds, salt and frequent rain, which affects render, roofs and window seals.

Building traditions across Ayrshire also raise conservation and planning questions, so we check those for new flooring in Irvine at the survey stage.

Do you need permission in Irvine?

For anyone in Irvine, the relevant framework is Scotland's. The summary below is general, so we always contact the council about your address before putting a price in writing.

Internal improvements do not need planning permission in Scotland unless the building is listed.

Like-for-like kitchen and bathroom replacements do not normally need a building warrant, but structural changes and some drainage or heating alterations do, and electrical work must meet the building standards.

Rules change and every property is different, so we check the planning history and constraints for your address before we quote.

The four stages

  1. Free site survey

    A free survey comes first. It gives us what we need to price new flooring properly, including dimensions, existing materials and access for deliveries, and gives you the chance to ask anything you like.

  2. Price and scope agreed

    You get the price in writing, itemised so you can see where the money goes. As long as the specification stays the same, that is the price you pay for new flooring.

  3. Plan and prepare

    Before anyone starts, we confirm the programme in writing, check whether consents are required and arrange deliveries. If a skip or scaffolding on the road needs a permit, we apply for it.

  4. The work itself

    On site, the agreed plan is followed and any change is put in writing first. At completion we do a final clean, go through the snagging list with you and leave you with the relevant documents.

How we work

One point of contactA single named contact handles your project from the first survey to the final handover, so you always know who to call with a question.
Free site surveyWe visit your home to measure up and discuss the work at no cost, and there is no obligation to go ahead once you have our price.
Changes agreed in writingIf something needs to change once work is under way, we explain why and confirm the cost or saving in writing before carrying on.
Certified where requiredElectrical, gas and other notifiable work is carried out by suitably registered people, and you receive the relevant certificates when it is finished.

Frequently asked questions

Is the price fixed?

Yes, for the specification we agree. Your written quote sets out exactly what is included at a fixed price. It only changes if you ask for something different, or if a problem the survey could not reasonably reveal later needs extra work. In either case we explain the change and confirm it in writing before going ahead.

Can I have wood flooring with underfloor heating?

Engineered wood and LVT both work well with underfloor heating, because they are stable and transfer heat efficiently. Solid wood is less suitable, as it can move and gap as temperatures change. The flooring and underlay must be approved for use with the heating system, and floor temperatures need limiting. We check the manufacturer's guidance before recommending a product.

What happens at the survey?

We visit your home at a time that suits you, look at the area involved, take measurements and check access, condition and any services that might be affected. We talk through what you want from new flooring, explain the options and answer questions. There is no charge and no obligation; afterwards we send a written quote.

What do I need to do before the fitters arrive?

Before fitting day, clear small items, ornaments and anything fragile from the room, and empty cupboards and wardrobes that stand on the floor. Let us know about heavy furniture so we can agree who moves it. Make sure the heating is set to a normal temperature so the flooring acclimatises properly. If you have pets, keep them out of the room while we work.

Will my doors need trimming?

Doors often need trimming after new flooring is fitted, because the combined height of the underlay and floor is usually greater than old carpet or vinyl. We take each door off, trim the bottom by the right amount and rehang it so it clears the new floor. Threshold strips are then fitted where the new floor meets another surface.

Near Irvine

If your address falls within KA11 and KA12, we cover it. The same goes for neighbouring Kilwinning, Kilmarnock and Ayr, which we include alongside Irvine when arranging surveys and quotes.

Planning new flooring in Irvine?

Start with a free site survey for new flooring in Irvine. You'll receive a written quote showing exactly what is included and how the payments are staged.

Call freeFree quote