A replacement front or back door is a new door and frame, usually composite, uPVC or aluminium, made to fit your existing opening and fitted with multi-point locks and weather seals to improve security, warmth and kerb appeal.
For a homeowner in Ayr, planning a new front or back door tends to begin with two questions: what will it cost, and how disruptive will it be? Our guide range is £950–£3,400 including VAT, and a typical job runs to Usually half a day to one day per door. Both numbers firm up once we have seen the property, measured up and agreed exactly what is included.
- Guide price
- £950–£3,400 inc VAT
- Time on site
- Usually half a day to one day per door
- Postcodes
- KA7, KA8 and KA9
- Planning rules
- Scotland
- Local area
- South Ayrshire
- Survey
- Free, with a written quote
How much does a new front or back door cost in Ayr?
What should you budget for a new front or back door in Ayr? Use the figures below as a starting point. Prices in Scotland sit about 4% below the national guide, so the range here is £950–£3,400 including VAT. Your fixed price comes in writing once we've surveyed the property, at no charge.
| Type of job | What it usually involves | Guide in Ayr |
|---|---|---|
| uPVC back door | A standard uPVC back or side door with a half-glazed panel and multi-point lock. | £750–£1,450 |
| Composite front door | A made-to-measure composite door in your chosen colour, glass design and hardware. | £1,150–£2,400 |
| Aluminium or door with side panels | A premium aluminium door, or a composite door with one or two side panels. | £2,400–£4,800 |
Expect these to shape the final quote:
- Door material: uPVC, composite or aluminium
- Side panels, fanlights and the amount of glass
- Lock, cylinder and hardware specification
- Condition of the opening, threshold and surrounding brickwork
What does the job include in Ayr?
- Measured survey of the opening, threshold and frame condition
- Made-to-measure door and frame in your chosen colour and design
- Multi-point locking with anti-snap cylinders and matching handles
- Removal and disposal of the old door and frame
- Low threshold options for level or easier access
- Weather seals, sealant and internal trims finished neatly
Building in Ayr
Ayr, Kilmarnock and the coastal towns from Largs to Girvan have Victorian sandstone villas and terraces, with red sandstone common in older buildings. Former mining villages have rows of cottages, Irvine was developed as a new town from the 1960s, and harled post-war houses and newer estates are found across the area.
Sandstone homes need careful repointing and stone repairs, and harled houses commonly need re-rendering. Villas and semis suit extensions and loft conversions, and coastal homes often take window and roofline renewal.
So when we survey a Ayr property for a new front or back door, the first step is working out how it was built and what has been changed since.
Planning and building rules in Ayr
Each UK nation sets its own consent rules, and Ayr is in Scotland. What follows is a plain summary; we check the specifics for your property with the council before pricing anything.
In Scotland, replacing windows and doors on a house generally needs no planning permission when the style is similar, but listed buildings and conservation areas are closely controlled and often need consent for any change of material or pattern.
A building warrant is not usually needed for like-for-like replacement windows, but the new units must still meet the Scottish building standards, including energy performance and, where relevant, escape from upper floors.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
The four stages
A visit to your home
Book a visit and we'll come to you. The survey covers measurements, the state of what's there now and any obvious constraints, so the price that follows is based on your actual home, not an average.
Quote in writing
Next you receive a written quote with a fixed price for the agreed specification. It lists what is included, what is not, and how payments are staged, so you can compare it properly.
Getting ready
We handle the paperwork side: checking whether planning permission or building control approval is needed, submitting applications where they are, and scheduling the trades and materials around your dates.
Finish and handover
The job proceeds in the order set out in the programme, with dust and debris kept under control. Finally we tidy away, inspect the work together and pass the finished project over to you with its paperwork.
How we work
Front and back doors in Ayr: questions
How do I look after a composite or uPVC door?
Looking after a composite or uPVC door is mostly a matter of regular cleaning with warm soapy water and a soft cloth. Avoid solvents and abrasive pads, which can dull the finish. Once or twice a year, lightly oil the lock mechanism and the moving parts along the edge of the door, and check the seals. If the door starts to catch, the hinges can usually be adjusted easily.
How much does a new front door cost?
A new front door costs £950–£3,400 supplied and fitted, depending on the material, the amount of glass and whether you want side panels. A uPVC back door sits at the lower end, a composite front door in the middle, and aluminium doors or doors with side panels at the top. Locks, letterplates and dual colours also affect the figure. We confirm a fixed price in writing after measuring your opening.
How long does it take to make a new door?
Made-to-measure doors usually take a few weeks to manufacture after the survey and your order are confirmed. Bespoke colours, special glass designs and aluminium doors can take longer. Once the door arrives, we arrange a fitting date that suits you. We give you a realistic lead time with your written quote, and we keep you updated if the manufacturer's dates change.
Who do I deal with during the job?
One point of contact manages your project from survey to handover. They schedule the trades working under our contract, keep you updated on progress, and are the person to call with any question. You don't need to coordinate builders, electricians or decorators separately, because that is part of what we do.
How long will a new front or back door take?
On a typical home, allow Usually half a day to one day per door. Larger projects, older buildings and extra work found once things are opened up can extend that, while simpler jobs may be shorter. Your quote includes an estimate of time on site, and your point of contact keeps you updated on the programme as the work progresses.
Near Ayr
We cover every part of Ayr, including KA7, KA8 and KA9, and nearby Irvine, Kilmarnock and Kilwinning. Wherever you are within that patch, the survey is free and the quote comes to you in writing.