A replacement front or back door is a new door and frame, usually composite, uPVC or aluminium, made to fit your existing opening and fitted with multi-point locks and weather seals to improve security, warmth and kerb appeal.
Whatever prompted you to look into a new front or back door, whether wear and tear, a growing family or plans to move, we can survey your Crewe home and give you a price in writing. Homes in the North West typically come in at £950–£3,300, VAT included, for this kind of work. We also cover Winsford, Kidsgrove and Congleton, and the same steps apply wherever you are in Cheshire.
- Guide price
- £950–£3,300 inc VAT
- Time on site
- Usually half a day to one day per door
- Postcodes
- CW1 and CW2
- Planning rules
- England
- Local area
- Cheshire East
- Survey
- Free, with a written quote
What should you budget for a new front or back door in Crewe?
Below is a breakdown of typical costs for a new front or back door in Crewe. Because rates in the North West are about 5% below the national guide, the overall guide comes to £950–£3,300, including VAT. Size, materials and access move the figure, and a free-of-charge survey settles it.
| Type of job | What it usually involves | Guide in Crewe |
|---|---|---|
| uPVC back door | A standard uPVC back or side door with a half-glazed panel and multi-point lock. | £750–£1,400 |
| Composite front door | A made-to-measure composite door in your chosen colour, glass design and hardware. | £1,150–£2,400 |
| Aluminium or door with side panels | A premium aluminium door, or a composite door with one or two side panels. | £2,400–£4,800 |
Expect these to shape the final quote:
- Door material: uPVC, composite or aluminium
- Side panels, fanlights and the amount of glass
- Lock, cylinder and hardware specification
- Colour, including different colours inside and out
What’s included?
- Made-to-measure door and frame in your chosen colour and design
- Multi-point locking with anti-snap cylinders and matching handles
- Glazing panels, side panels or fanlights where specified
- Low threshold options for level or easier access
- Weather seals, sealant and internal trims finished neatly
- Building regulations paperwork where a glazed door needs it
Building in Crewe
Chester mixes Georgian and Victorian terraces with black-and-white revival frontages, and red sandstone shows up across the west of the county. Crewe has railway-era brick terraces, Macclesfield has mill workers' cottages, and Wilmslow, Knutsford and Alderley Edge are known for large detached homes. Interwar semis and newer estates surround Warrington and Northwich.
Terraced and mill-era cottages often need repointing, roof work and loft space. Larger detached homes commonly take on kitchen extensions, bifold doors and garden landscaping, while interwar semis suit side extensions and replacement windows.
With that background in mind, here is how we typically handle a new front or back door for homes in Crewe, from the first visit to the finished result.
Planning and building rules in Crewe
Planning law differs across the UK. For a home in Crewe, it is the England rules below that count, and we check them with the council ahead of any quote.
Replacing windows and doors on a house is usually permitted development in England when the new ones look broadly similar to the old. Flats, listed buildings and homes covered by an Article 4 direction can need consent, and conservation areas may limit materials or styles.
Replacement windows and external doors must meet Building Regulations for energy efficiency, ventilation and, on upper floors, escape. The work is either self-certified by an installer registered with a competent person scheme or signed off by building control.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
The four stages
Survey and measure
Book a visit and we'll come to you. The survey covers measurements, the state of what's there now and any obvious constraints, so the price that follows is based on your actual home, not an average.
Written quote
We put everything into a written, fixed-price quote: the specification, what's excluded, staged payments and the expected time on site. Take whatever time you need to decide; there's no pressure to commit.
Getting ready
Next comes planning the work itself. We set a start date that suits you, line up the right trades, and make sure any approvals for a new front or back door are in place before the first day on site.
The work itself
On site, the agreed plan is followed and any change is put in writing first. At completion we do a final clean, go through the snagging list with you and leave you with the relevant documents.
Working with SK Home Improvements
Front and back doors in Crewe: questions
Do I need permission to change my front door?
Planning permission is not usually needed to replace a front door, but it depends on the style and size of the change, your home's location, whether it is listed or in a conservation area, and which UK nation you are in. Listed homes generally need consent for any change, and some conservation areas control colours and styles. Flat entrance doors in shared buildings must also meet fire rules. We check before quoting.
How long will my home be open while the door is fitted?
Fitting a new door usually takes half a day to a full day, and your home is only open for the short time between taking out the old frame and fixing the new one. We keep the opening covered if there is any delay, and we never leave a doorway insecure overnight. Once the frame is fixed, we hang the door, adjust the locks, seal around the frame and finish the trims.
Can I stay at home during the work?
In most cases, yes. Most people can live at home throughout, and we plan the work to keep disruption down by protecting floors, agreeing working hours and keeping access routes clear. Bigger jobs affecting kitchens, bathrooms or heating may mean a short spell with reduced facilities, and we talk this through with you at the survey.
What is the difference between a composite and a uPVC door?
A composite door has a tough outer skin over a solid insulated core, so it feels heavier and more solid than uPVC and holds its colour well. A uPVC door is built from reinforced plastic panels and costs less. Both can have multi-point locking and good weather seals. Many people choose composite for the front door and uPVC for back or side doors, where looks matter less.
Do you cover Winsford, Kidsgrove and Congleton?
Yes. As well as Crewe, we cover Winsford, Kidsgrove and Congleton and the rest of Cheshire. Our coverage is UK-wide, so the process is the same wherever you are: a free site survey, a quote in writing that fixes the price for the agreed scope, and one point of contact while the work is planned and carried out.
Nearby towns
From CW1 and CW2 to the edges of Crewe and on into Winsford, Kidsgrove and Congleton, we can arrange a site visit and a written quote for your project, planned around dates that work for you.