Essex · Windows & Doors

Front and back doors in Brentwood

Covering CM13, CM14 and CM15 and the rest of Brentwood. Guide price £1,050–£3,700 inc VAT, confirmed after a free survey.

Grey composite front door with a glazed side panel on a brick house

Free survey in Brentwood

Tell us about the job and we will be in touch to arrange a visit.

Prefer to talk? Call 0800 088 6341 or start a live chat.

A replacement front or back door is a new door and frame, usually composite, uPVC or aluminium, made to fit your existing opening and fitted with multi-point locks and weather seals to improve security, warmth and kerb appeal.

In Brentwood, as anywhere in Essex, the price of a new front or back door is driven mainly by size, materials and access. Across the East of England our guide sits at £1,050–£3,700 with VAT, but restricted parking, a narrow side passage or extra preparation can move the figure either way. That is why every price we give follows a visit to the house.

Guide price
£1,050–£3,700 inc VAT
Time on site
Usually half a day to one day per door
Postcodes
CM13, CM14 and CM15
Planning rules
England
Local area
Essex
Survey
Free, with a written quote

How much does a new front or back door cost in Brentwood?

Here is how the guide price for a new front or back door breaks down in Brentwood. We start from national figures and adjust for the East of England, which comes out about 5% above the national guide. The resulting range, VAT included, is £1,050–£3,700, and a survey, at no cost to you, firms it up.

Type of jobWhat it usually involvesGuide in Brentwood
uPVC back doorA standard uPVC back or side door with a half-glazed panel and multi-point lock.£850–£1,600
Composite front doorA made-to-measure composite door in your chosen colour, glass design and hardware.£1,250–£2,600
Aluminium or door with side panelsA premium aluminium door, or a composite door with one or two side panels.£2,600–£5,200

What moves the price up or down:

  • Door material: uPVC, composite or aluminium
  • Side panels, fanlights and the amount of glass
  • Lock, cylinder and hardware specification
  • Condition of the opening, threshold and surrounding brickwork

What’s included?

  • Measured survey of the opening, threshold and frame condition
  • Made-to-measure door and frame in your chosen colour and design
  • Multi-point locking with anti-snap cylinders and matching handles
  • Removal and disposal of the old door and frame
  • Weather seals, sealant and internal trims finished neatly
  • Building regulations paperwork where a glazed door needs it
uPVC doorA lower-cost choice that suits back and side doors, with multi-point locks and easy cleaning.
Aluminium doorSlim, very strong frames and contemporary styles, with flush panels and long bar handles.
Stable doorSplit horizontally so the top opens on its own, popular for kitchens and back doors.
Door with side panelsGlazed or solid side panels, or a fanlight, that bring extra light into a hallway.

Homes in Essex

Essex ranges from timber-framed and weatherboarded cottages in the north, some with decorative pargeting, to Victorian terraces in Colchester, Chelmsford and Southend. Basildon and Harlow were built as post-war new towns, much of the south-east has interwar suburbs and bungalows, and large new estates continue to appear around Chelmsford and Braintree.

Terraces and semis commonly suit loft conversions and rear extensions, and many bungalows can take a loft room. New-town homes often need cladding, window and roofline renewal, while timber-framed cottages call for lime plaster and repairs that respect the original frame.

None of this holds for every street in Brentwood, which is why we look at your actual house before pricing a new front or back door rather than assuming from its age alone.

Planning and building rules in Brentwood

Homes in Brentwood come under the regulations for England, summarised below. We don't rely on general rules alone: we confirm the position for your address with the council before a quote goes out.

Replacing windows and doors on a house is usually permitted development in England when the new ones look broadly similar to the old. Flats, listed buildings and homes covered by an Article 4 direction can need consent, and conservation areas may limit materials or styles.

Replacement windows and external doors must meet Building Regulations for energy efficiency, ventilation and, on upper floors, escape. The work is either self-certified by an installer registered with a competent person scheme or signed off by building control.

Rules change and every property is different, so we check the planning history and constraints for your address before we quote.

How does the job run?

  1. Survey and measure

    Book a visit and we'll come to you. The survey covers measurements, the state of what's there now and any obvious constraints, so the price that follows is based on your actual home, not an average.

  2. Price and scope agreed

    Next you receive a written quote with a fixed price for the agreed specification. It lists what is included, what is not, and how payments are staged, so you can compare it properly.

  3. Booking the work

    With the quote agreed, we book the work in and handle preparation: permissions where needed, building control notifications, material orders and access arrangements for your Brentwood property.

  4. Build and hand over

    The work is carried out to the agreed specification, with floors and furniture protected and the site kept tidy. At the end we clean up, walk through the finished job with you and hand over any certificates.

How we work

One point of contactA single named contact handles your project from the first survey to the final handover, so you always know who to call with a question.
Free site surveyWe visit your home to measure up and discuss the work at no cost, and there is no obligation to go ahead once you have our price.
Changes agreed in writingIf something needs to change once work is under way, we explain why and confirm the cost or saving in writing before carrying on.
Realistic timetablesWe give you an honest estimate of time on site at the quote stage and keep you informed if anything affects the programme once work starts.

Front and back doors in Brentwood: questions

What is the difference between a composite and a uPVC door?

A composite door has a tough outer skin over a solid insulated core, so it feels heavier and more solid than uPVC and holds its colour well. A uPVC door is built from reinforced plastic panels and costs less. Both can have multi-point locking and good weather seals. Many people choose composite for the front door and uPVC for back or side doors, where looks matter less.

How do I look after a composite or uPVC door?

Looking after a composite or uPVC door is mostly a matter of regular cleaning with warm soapy water and a soft cloth. Avoid solvents and abrasive pads, which can dull the finish. Once or twice a year, lightly oil the lock mechanism and the moving parts along the edge of the door, and check the seals. If the door starts to catch, the hinges can usually be adjusted easily.

How long does it take to make a new door?

Made-to-measure doors usually take a few weeks to manufacture after the survey and your order are confirmed. Bespoke colours, special glass designs and aluminium doors can take longer. Once the door arrives, we arrange a fitting date that suits you. We give you a realistic lead time with your written quote, and we keep you updated if the manufacturer's dates change.

Is the price fixed?

Yes, for the specification we agree. Your written quote sets out exactly what is included at a fixed price. It only changes if you ask for something different, or if a problem the survey could not reasonably reveal later needs extra work. In either case we explain the change and confirm it in writing before going ahead.

How long will a new front or back door take?

On a typical home, allow Usually half a day to one day per door. Larger projects, older buildings and extra work found once things are opened up can extend that, while simpler jobs may be shorter. Your quote includes an estimate of time on site, and your point of contact keeps you updated on the programme as the work progresses.

Near Brentwood

Brentwood and its CM13, CM14 and CM15 postcodes are part of our coverage. Homeowners in Billericay, Hornchurch and Romford can also book a free survey with us and receive a written price for their job.

Ready for a written price?

Ready to talk about a new front or back door in Brentwood? Book a free site survey and we'll send you a written, fixed-price quote for the specification you choose.

Call freeFree quote