A replacement front or back door is a new door and frame, usually composite, uPVC or aluminium, made to fit your existing opening and fitted with multi-point locks and weather seals to improve security, warmth and kerb appeal.
We offer a new front or back door across Gloucestershire, and Kingswood is one of the places we cover, along with nearby Mangotsfield, Keynsham and Bishopsworth. Before anything is agreed we visit, check the existing structure and talk through your options. You then receive a written quote setting out the full scope; for most homes in the South West it sits within £1,000–£3,600 including VAT.
- Guide price
- £1,000–£3,600 inc VAT
- Time on site
- Usually half a day to one day per door
- Postcodes
- BS15 and BS16
- Planning rules
- England
- Local area
- South Gloucestershire
- Survey
- Free, with a written quote
How much does a new front or back door cost in Kingswood?
Budgeting for a new front or back door in Kingswood? The numbers below include VAT and are adjusted for the South West, where costs are about 2% above the national guide. The headline range is £1,000–£3,600. Nothing is final until we have measured up at a free survey and agreed the specification with you.
| Type of job | What it usually involves | Guide in Kingswood |
|---|---|---|
| uPVC back door | A standard uPVC back or side door with a half-glazed panel and multi-point lock. | £800–£1,550 |
| Composite front door | A made-to-measure composite door in your chosen colour, glass design and hardware. | £1,200–£2,600 |
| Aluminium or door with side panels | A premium aluminium door, or a composite door with one or two side panels. | £2,600–£5,100 |
Expect these to shape the final quote:
- Side panels, fanlights and the amount of glass
- Lock, cylinder and hardware specification
- Colour, including different colours inside and out
- Condition of the opening, threshold and surrounding brickwork
What do you get?
- Measured survey of the opening, threshold and frame condition
- Multi-point locking with anti-snap cylinders and matching handles
- Glazing panels, side panels or fanlights where specified
- Removal and disposal of the old door and frame
- Low threshold options for level or easier access
- Weather seals, sealant and internal trims finished neatly
Homes in Gloucestershire
Golden Cotswold limestone defines towns and villages such as Cirencester, Stow and Tetbury, often with stone-slate roofs. Cheltenham is known for Regency stucco terraces and villas, Gloucester has Victorian brick terraces and interwar estates, the Stroud valleys have mill-era stone cottages, and the Forest of Dean uses its own sandstone.
Cotswold stone homes often need lime pointing, stone repairs and windows that suit conservation areas. Regency houses may call for render and decorating, while brick terraces and estate homes suit loft rooms and extensions.
With that background in mind, here is how we typically handle a new front or back door for homes in Kingswood, from the first visit to the finished result.
Do you need permission in Kingswood?
As Kingswood is in England, read the following with that system of planning and building control in mind. We check what applies to your house with the council before you receive a quote.
Replacing windows and doors on a house is usually permitted development in England when the new ones look broadly similar to the old. Flats, listed buildings and homes covered by an Article 4 direction can need consent, and conservation areas may limit materials or styles.
Replacement windows and external doors must meet Building Regulations for energy efficiency, ventilation and, on upper floors, escape. The work is either self-certified by an installer registered with a competent person scheme or signed off by building control.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
How does the job run?
We look at the job
First, someone visits your home in Kingswood to see the space, take measurements and note anything that could affect the work, such as access or the condition of what is there. There is no charge for this visit.
Your fixed price
The quote arrives in writing, not over the phone. It covers the full scope, the finishes you've chosen, any exclusions and the payment schedule, with a fixed price tied to that specification.
Getting ready
Before anyone starts, we confirm the programme in writing, check whether consents are required and arrange deliveries. If a skip or scaffolding on the road needs a permit, we apply for it.
On site to finish
Work goes ahead as scheduled and you deal with one contact throughout. When the last trade leaves, we clear and clean the site, talk you through what has been done and pass on any certificates and care instructions.
Why homeowners choose us
Questions about a new front or back door in Kingswood
Do I need planning permission in Kingswood?
It depends on the work, the size of the project, your property type and whether the building is listed or in a conservation area. Kingswood is in England, so England's rules apply. Many smaller jobs need no planning application, but some still need building control approval. We check what applies to your address before quoting.
How much does a new front door cost?
A new front door costs £1,000–£3,600 supplied and fitted, depending on the material, the amount of glass and whether you want side panels. A uPVC back door sits at the lower end, a composite front door in the middle, and aluminium doors or doors with side panels at the top. Locks, letterplates and dual colours also affect the figure. We confirm a fixed price in writing after measuring your opening.
How much will a new front or back door cost in Kingswood?
As a guide, expect to pay £1,000–£3,600 including VAT for a new front or back door in Kingswood. That range is adjusted for the South West, which runs about 2% above the national guide. Where your project lands depends on size, materials, access and the condition of what is already there. We confirm a fixed price in writing after a free survey of your home.
How long does it take to make a new door?
Made-to-measure doors usually take a few weeks to manufacture after the survey and your order are confirmed. Bespoke colours, special glass designs and aluminium doors can take longer. Once the door arrives, we arrange a fitting date that suits you. We give you a realistic lead time with your written quote, and we keep you updated if the manufacturer's dates change.
Do I need permission to change my front door?
Planning permission is not usually needed to replace a front door, but it depends on the style and size of the change, your home's location, whether it is listed or in a conservation area, and which UK nation you are in. Listed homes generally need consent for any change, and some conservation areas control colours and styles. Flat entrance doors in shared buildings must also meet fire rules. We check before quoting.
Also covering areas around Kingswood
From BS15 and BS16 to the edges of Kingswood and on into Mangotsfield, Keynsham and Bishopsworth, we can arrange a site visit and a written quote for your project, planned around dates that work for you.