Greater Manchester · Windows & Doors

Front and back doors in Ashton in Makerfield

Guide price £950–£3,300 including VAT, typically Usually half a day to one day per door, with a free site survey and a written fixed price.

Grey composite front door with a glazed side panel on a brick house

Free survey in Ashton in Makerfield

Tell us about the job and we will be in touch to arrange a visit.

Prefer to talk? Call 0800 088 6341 or start a live chat.

A replacement front or back door is a new door and frame, usually composite, uPVC or aluminium, made to fit your existing opening and fitted with multi-point locks and weather seals to improve security, warmth and kerb appeal.

We offer a new front or back door across Greater Manchester, and Ashton in Makerfield is one of the places we cover, along with nearby Golborne, Newton-le-Willows and St Helens. Before anything is agreed we visit, check the existing structure and talk through your options. You then receive a written quote setting out the full scope; for most homes in the North West it sits within £950–£3,300 including VAT.

Guide price
£950–£3,300 inc VAT
Time on site
Usually half a day to one day per door
Postcodes
WA12 and WN4
Planning rules
England
Local area
Wigan
Survey
Free, with a written quote

How much does a new front or back door cost in Ashton in Makerfield?

Use the table to gauge the cost of a new front or back door in Ashton in Makerfield before we visit. Figures include VAT and are scaled for the North West, coming out about 5% below the national guide, which gives £950–£3,300 overall. After a free survey, you receive a fixed written price.

Type of jobWhat it usually involvesGuide in Ashton in Makerfield
uPVC back doorA standard uPVC back or side door with a half-glazed panel and multi-point lock.£750–£1,400
Composite front doorA made-to-measure composite door in your chosen colour, glass design and hardware.£1,150–£2,400
Aluminium or door with side panelsA premium aluminium door, or a composite door with one or two side panels.£2,400–£4,800

The main things that change the figure:

  • Door material: uPVC, composite or aluminium
  • Side panels, fanlights and the amount of glass
  • Lock, cylinder and hardware specification
  • Colour, including different colours inside and out

What do you get?

  • Measured survey of the opening, threshold and frame condition
  • Made-to-measure door and frame in your chosen colour and design
  • Multi-point locking with anti-snap cylinders and matching handles
  • Glazing panels, side panels or fanlights where specified
  • Low threshold options for level or easier access
  • Building regulations paperwork where a glazed door needs it
uPVC doorA lower-cost choice that suits back and side doors, with multi-point locks and easy cleaning.
Aluminium doorSlim, very strong frames and contemporary styles, with flush panels and long bar handles.
Stable doorSplit horizontally so the top opens on its own, popular for kitchens and back doors.
Door with side panelsGlazed or solid side panels, or a fanlight, that bring extra light into a hallway.

Building in Ashton in Makerfield

Rows of Victorian red-brick terraces fill much of Manchester, Salford and the mill towns, with stone terraces in the Pennine fringes around Oldham and Saddleworth. South Manchester has Edwardian semis and villas, Wythenshawe was built as a large interwar garden suburb, and city-centre apartments and new estates continue to grow.

Rainfall is high, especially near the Pennines, so brickwork, gutters and roof coverings take a steady soaking and freeze-thaw over winter.

In Ashton in Makerfield, as elsewhere in Greater Manchester, we take the building's age and construction into account before recommending anything, because both can change what is involved in a new front or back door.

Permissions for a new front or back door in Ashton in Makerfield

Homes in Ashton in Makerfield come under the regulations for England, summarised below. We don't rely on general rules alone: we confirm the position for your address with the council before a quote goes out.

Replacing windows and doors on a house is usually permitted development in England when the new ones look broadly similar to the old. Flats, listed buildings and homes covered by an Article 4 direction can need consent, and conservation areas may limit materials or styles.

Replacement windows and external doors must meet Building Regulations for energy efficiency, ventilation and, on upper floors, escape. The work is either self-certified by an installer registered with a competent person scheme or signed off by building control.

Rules change and every property is different, so we check the planning history and constraints for your address before we quote.

What happens after you get in touch?

  1. We look at the job

    First, someone visits your home in Ashton in Makerfield to see the space, take measurements and note anything that could affect the work, such as access or the condition of what is there. There is no charge for this visit.

  2. Price and scope agreed

    After the survey we send a quote for a new front or back door that fixes the price for the scope we've agreed. If you want to change materials or scope, we revise it in writing before anything is booked.

  3. Booking the work

    Before anyone starts, we confirm the programme in writing, check whether consents are required and arrange deliveries. If a skip or scaffolding on the road needs a permit, we apply for it.

  4. Finish and handover

    Our trades complete a new front or back door while your point of contact keeps you updated. When everything is finished, we clear the site, take away waste and go through the result with you before handover.

How we work

One point of contactA single named contact handles your project from the first survey to the final handover, so you always know who to call with a question.
Guide prices shown upfrontYou can see typical price ranges, including VAT, before you contact us, so you can judge whether a project fits your budget.
Coverage across the UKWe take on projects in England, Wales, Scotland and Northern Ireland, and plan each one under the rules for the nation it is in.
One contract, several tradesJobs that need builders, plasterers, electricians and decorators come under a single contract, so you are not coordinating separate firms yourself.

Frequently asked questions

Who do I deal with during the job?

One point of contact manages your project from survey to handover. They schedule the trades working under our contract, keep you updated on progress, and are the person to call with any question. You don't need to coordinate builders, electricians or decorators separately, because that is part of what we do.

Do I need permission to change my front door?

Planning permission is not usually needed to replace a front door, but it depends on the style and size of the change, your home's location, whether it is listed or in a conservation area, and which UK nation you are in. Listed homes generally need consent for any change, and some conservation areas control colours and styles. Flat entrance doors in shared buildings must also meet fire rules. We check before quoting.

Can I have a low threshold for wheelchair or pushchair access?

A low threshold is a flat or very shallow sill that makes a doorway easier to cross with a wheelchair, walking frame or pushchair. Most composite, uPVC and aluminium doors can be supplied with one. The outside ground level and drainage need checking, because a low threshold must still keep rainwater out. We look at this during the survey and suggest a channel drain or small ramp if needed.

Can I stay at home during the work?

In most cases, yes. Most people can live at home throughout, and we plan the work to keep disruption down by protecting floors, agreeing working hours and keeping access routes clear. Bigger jobs affecting kitchens, bathrooms or heating may mean a short spell with reduced facilities, and we talk this through with you at the survey.

How do I look after a composite or uPVC door?

Looking after a composite or uPVC door is mostly a matter of regular cleaning with warm soapy water and a soft cloth. Avoid solvents and abrasive pads, which can dull the finish. Once or twice a year, lightly oil the lock mechanism and the moving parts along the edge of the door, and check the seals. If the door starts to catch, the hinges can usually be adjusted easily.

Also covering areas around Ashton in Makerfield

Homes across WA12 and WN4 in Ashton in Makerfield are within our coverage, as are those in Golborne, Newton-le-Willows and St Helens. If you are just outside these areas, ask anyway, because we work right across the UK.

Talk to us about a new front or back door

Get a clearer idea of the cost of a new front or back door in Ashton in Makerfield with our guide-price tool, then book a survey at no charge when you're ready for a fixed figure.

Call freeFree quote