A replacement front or back door is a new door and frame, usually composite, uPVC or aluminium, made to fit your existing opening and fitted with multi-point locks and weather seals to improve security, warmth and kerb appeal.
Addresses across ME1, ME4 and ME5 fall within our coverage for a new front or back door, so if your home is in Rochester we can arrange a survey on a day that works for you. We inspect the existing building, discuss materials and layout, and then price the agreed specification in writing. Expect a guide range of £1,100–£3,900 including VAT before that visit.
- Guide price
- £1,100–£3,900 inc VAT
- Time on site
- Usually half a day to one day per door
- Postcodes
- ME1, ME4 and ME5
- Planning rules
- England
- Local area
- Medway
- Survey
- Free, with a written quote
Front and back doors prices in Rochester
What should you budget for a new front or back door in Rochester? Use the figures below as a starting point. Prices in the South East sit about 12% above the national guide, so the range here is £1,100–£3,900 including VAT. Your fixed price comes in writing once we've surveyed the property, at no charge.
| Type of job | What it usually involves | Guide in Rochester |
|---|---|---|
| uPVC back door | A standard uPVC back or side door with a half-glazed panel and multi-point lock. | £900–£1,700 |
| Composite front door | A made-to-measure composite door in your chosen colour, glass design and hardware. | £1,350–£2,800 |
| Aluminium or door with side panels | A premium aluminium door, or a composite door with one or two side panels. | £2,800–£5,600 |
Your price depends mostly on:
- Door material: uPVC, composite or aluminium
- Side panels, fanlights and the amount of glass
- Lock, cylinder and hardware specification
- Condition of the opening, threshold and surrounding brickwork
What does the job include in Rochester?
- Measured survey of the opening, threshold and frame condition
- Made-to-measure door and frame in your chosen colour and design
- Glazing panels, side panels or fanlights where specified
- Removal and disposal of the old door and frame
- Weather seals, sealant and internal trims finished neatly
- Building regulations paperwork where a glazed door needs it
Building in Rochester
Kent's older buildings include oast houses, weatherboarded cottages, Wealden timber-framed houses and Kentish ragstone walls. Medway towns have long rows of Victorian terraces, Margate and Ramsgate have Regency and Victorian seafronts, and Ashford, Maidstone and Dartford have seen large new estates alongside interwar and post-war housing.
Victorian terraces suit loft rooms and rear extensions; weatherboarded and timber-framed buildings may need cladding repairs and lime work. Newer estate homes often take garage conversions, porches and landscaping.
With that background in mind, here is how we typically handle a new front or back door for homes in Rochester, from the first visit to the finished result.
Do you need permission in Rochester?
For anyone in Rochester, the relevant framework is England's. The summary below is general, so we always contact the council about your address before putting a price in writing.
Replacing windows and doors on a house is usually permitted development in England when the new ones look broadly similar to the old. Flats, listed buildings and homes covered by an Article 4 direction can need consent, and conservation areas may limit materials or styles.
Replacement windows and external doors must meet Building Regulations for energy efficiency, ventilation and, on upper floors, escape. The work is either self-certified by an installer registered with a competent person scheme or signed off by building control.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
How does the job run?
Survey and measure
First, someone visits your home in Rochester to see the space, take measurements and note anything that could affect the work, such as access or the condition of what is there. There is no charge for this visit.
Written quote
You get the price in writing, itemised so you can see where the money goes. As long as the specification stays the same, that is the price you pay for a new front or back door.
Booking the work
Before anyone starts, we confirm the programme in writing, check whether consents are required and arrange deliveries. If a skip or scaffolding on the road needs a permit, we apply for it.
On site to finish
During the work we protect the areas around it and tidy up at the end of each day. Once complete, we check the finish, remove our materials and hand over paperwork such as building control sign-off where it applies.
How we work
Common questions
Can I have a low threshold for wheelchair or pushchair access?
A low threshold is a flat or very shallow sill that makes a doorway easier to cross with a wheelchair, walking frame or pushchair. Most composite, uPVC and aluminium doors can be supplied with one. The outside ground level and drainage need checking, because a low threshold must still keep rainwater out. We look at this during the survey and suggest a channel drain or small ramp if needed.
How much does a new front door cost?
A new front door costs £1,100–£3,900 supplied and fitted, depending on the material, the amount of glass and whether you want side panels. A uPVC back door sits at the lower end, a composite front door in the middle, and aluminium doors or doors with side panels at the top. Locks, letterplates and dual colours also affect the figure. We confirm a fixed price in writing after measuring your opening.
Can I stay at home during the work?
In most cases, yes. Most people can live at home throughout, and we plan the work to keep disruption down by protecting floors, agreeing working hours and keeping access routes clear. Bigger jobs affecting kitchens, bathrooms or heating may mean a short spell with reduced facilities, and we talk this through with you at the survey.
Which postcodes in Rochester do you cover?
We cover ME1, ME4 and ME5, along with the rest of Kent. If your postcode is not listed, get in touch anyway: our coverage is UK-wide, and we can usually arrange a survey wherever you live. Enter your postcode in the guide-price tool or contact form and we will confirm.
What is the difference between a composite and a uPVC door?
A composite door has a tough outer skin over a solid insulated core, so it feels heavier and more solid than uPVC and holds its colour well. A uPVC door is built from reinforced plastic panels and costs less. Both can have multi-point locking and good weather seals. Many people choose composite for the front door and uPVC for back or side doors, where looks matter less.
Also covering areas around Rochester
Our coverage in Rochester includes ME1, ME4 and ME5. We also travel to Chatham, Strood and Gillingham, so neighbouring addresses are looked after on exactly the same terms as those in town.