A replacement front or back door is a new door and frame, usually composite, uPVC or aluminium, made to fit your existing opening and fitted with multi-point locks and weather seals to improve security, warmth and kerb appeal.
We take on a new front or back door throughout Maesteg and the surrounding CF34 postcodes, as well as in Briton Ferry, Neath and Bridgend. The guide range for this work in Wales is £900–£3,200 including VAT; where your project falls depends on its size, the materials you pick and how easy the site is to reach. A free survey turns that range into a fixed figure.
- Guide price
- £900–£3,200 inc VAT
- Time on site
- Usually half a day to one day per door
- Postcodes
- CF34
- Planning rules
- Wales
- Local area
- Bridgend
- Survey
- Free, with a written quote
Front and back doors prices in Maesteg
Use the table to gauge the cost of a new front or back door in Maesteg before we visit. Figures include VAT and are scaled for Wales, coming out about 8% below the national guide, which gives £900–£3,200 overall. After a free survey, you receive a fixed written price.
| Type of job | What it usually involves | Guide in Maesteg |
|---|---|---|
| uPVC back door | A standard uPVC back or side door with a half-glazed panel and multi-point lock. | £750–£1,400 |
| Composite front door | A made-to-measure composite door in your chosen colour, glass design and hardware. | £1,100–£2,300 |
| Aluminium or door with side panels | A premium aluminium door, or a composite door with one or two side panels. | £2,300–£4,600 |
What moves the price up or down:
- Door material: uPVC, composite or aluminium
- Side panels, fanlights and the amount of glass
- Colour, including different colours inside and out
- Condition of the opening, threshold and surrounding brickwork
What’s included?
- Measured survey of the opening, threshold and frame condition
- Made-to-measure door and frame in your chosen colour and design
- Multi-point locking with anti-snap cylinders and matching handles
- Removal and disposal of the old door and frame
- Weather seals, sealant and internal trims finished neatly
- Building regulations paperwork where a glazed door needs it
Local housing and a new front or back door
The Rhondda, Cynon and Merthyr valleys are lined with stone terraces built for mining families, stepped along steep hillsides. Pontypridd, Caerphilly and Merthyr Tydfil have Victorian centres, and Bridgend has grown with large modern estates alongside interwar and post-war housing.
Valley terraces commonly need repointing, roof repairs, rendering and window replacement, and loft conversions can add useful space. Newer estate homes often take garage conversions, porches and landscaping.
That variety is why a guide price for a new front or back door in Maesteg is only a starting point; the survey shows what your particular property needs.
Planning and building rules in Maesteg
Which rules apply depends on where you live. For Maesteg, the answer is Wales, and the points below reflect that; we verify them with the council before quoting.
In Wales, replacing windows and doors on a house usually needs no planning permission if the new ones are similar in appearance. Listed buildings, flats and some conservation areas are controlled, so the council should be asked first.
Building Regulations in Wales apply to replacement windows and doors, covering energy performance, ventilation and escape routes. A registered competent person can self-certify the work, or building control inspects it.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
How does the job run?
Survey and measure
Book a visit and we'll come to you. The survey covers measurements, the state of what's there now and any obvious constraints, so the price that follows is based on your actual home, not an average.
Written quote
Next you receive a written quote with a fixed price for the agreed specification. It lists what is included, what is not, and how payments are staged, so you can compare it properly.
Booking the work
Before anyone starts, we confirm the programme in writing, check whether consents are required and arrange deliveries. If a skip or scaffolding on the road needs a permit, we apply for it.
Build and hand over
During the work we protect the areas around it and tidy up at the end of each day. Once complete, we check the finish, remove our materials and hand over paperwork such as building control sign-off where it applies.
What you can expect from us
Frequently asked questions
How do I look after a composite or uPVC door?
Looking after a composite or uPVC door is mostly a matter of regular cleaning with warm soapy water and a soft cloth. Avoid solvents and abrasive pads, which can dull the finish. Once or twice a year, lightly oil the lock mechanism and the moving parts along the edge of the door, and check the seals. If the door starts to catch, the hinges can usually be adjusted easily.
How long does it take to make a new door?
Made-to-measure doors usually take a few weeks to manufacture after the survey and your order are confirmed. Bespoke colours, special glass designs and aluminium doors can take longer. Once the door arrives, we arrange a fitting date that suits you. We give you a realistic lead time with your written quote, and we keep you updated if the manufacturer's dates change.
How long will my home be open while the door is fitted?
Fitting a new door usually takes half a day to a full day, and your home is only open for the short time between taking out the old frame and fixing the new one. We keep the opening covered if there is any delay, and we never leave a doorway insecure overnight. Once the frame is fixed, we hang the door, adjust the locks, seal around the frame and finish the trims.
Who do I deal with during the job?
One point of contact manages your project from survey to handover. They schedule the trades working under our contract, keep you updated on progress, and are the person to call with any question. You don't need to coordinate builders, electricians or decorators separately, because that is part of what we do.
Which postcodes in Maesteg do you cover?
We cover CF34, along with the rest of Mid Glamorgan. If your postcode is not listed, get in touch anyway: our coverage is UK-wide, and we can usually arrange a survey wherever you live. Enter your postcode in the guide-price tool or contact form and we will confirm.
Also covering areas around Maesteg
Whether you're in the centre of Maesteg or on its outskirts, CF34 addresses are covered. We extend the same service, and the same fixed-price approach, to Briton Ferry, Neath and Bridgend.