A replacement front or back door is a new door and frame, usually composite, uPVC or aluminium, made to fit your existing opening and fitted with multi-point locks and weather seals to improve security, warmth and kerb appeal.
Planning a new front or back door for a home in Shrewsbury means making a handful of decisions about materials, layout, finish and timing. We help you work through them at a free survey, then confirm in writing what it will cost for the options you pick. Most projects of this type need Usually half a day to one day per door, and we cover every SY1, SY2 and SY3 address as well as the rest of Shropshire.
- Guide price
- £1,000–£3,400 inc VAT
- Time on site
- Usually half a day to one day per door
- Postcodes
- SY1, SY2 and SY3
- Planning rules
- England
- Local area
- Shropshire
- Survey
- Free, with a written quote
Front and back doors prices in Shrewsbury
These are guide costs, not quotes. For a new front or back door in Shrewsbury the range is £1,000–£3,400, VAT included, reflecting prices in the West Midlands that are about 2% below the national guide. Once we have visited for a free survey, you get a firm figure for the scope you approve.
| Type of job | What it usually involves | Guide in Shrewsbury |
|---|---|---|
| uPVC back door | A standard uPVC back or side door with a half-glazed panel and multi-point lock. | £800–£1,450 |
| Composite front door | A made-to-measure composite door in your chosen colour, glass design and hardware. | £1,200–£2,400 |
| Aluminium or door with side panels | A premium aluminium door, or a composite door with one or two side panels. | £2,400–£4,900 |
What moves the price up or down:
- Door material: uPVC, composite or aluminium
- Lock, cylinder and hardware specification
- Colour, including different colours inside and out
- Condition of the opening, threshold and surrounding brickwork
What does the job include in Shrewsbury?
- Measured survey of the opening, threshold and frame condition
- Made-to-measure door and frame in your chosen colour and design
- Removal and disposal of the old door and frame
- Low threshold options for level or easier access
- Weather seals, sealant and internal trims finished neatly
- Building regulations paperwork where a glazed door needs it
Local housing and a new front or back door
Shrewsbury and Ludlow are known for black-and-white timber-framed buildings alongside Georgian brick, and red sandstone is common in the north of the county. Telford was built as a new town from the late 1960s with large planned estates, and market towns such as Oswestry, Bridgnorth and Whitchurch mix historic centres with interwar and newer housing.
Timber-framed and stone buildings often need lime plaster, breathable finishes and roof repairs. Telford homes commonly suit extensions, window replacement and roofline or cladding renewal.
If your house in Shrewsbury fits one of these patterns, it helps us anticipate what a new front or back door will involve, though we always confirm the details on site.
Do you need permission in Shrewsbury?
Each UK nation sets its own consent rules, and Shrewsbury is in England. What follows is a plain summary; we check the specifics for your property with the council before pricing anything.
Replacing windows and doors on a house is usually permitted development in England when the new ones look broadly similar to the old. Flats, listed buildings and homes covered by an Article 4 direction can need consent, and conservation areas may limit materials or styles.
Replacement windows and external doors must meet Building Regulations for energy efficiency, ventilation and, on upper floors, escape. The work is either self-certified by an installer registered with a competent person scheme or signed off by building control.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
What happens after you get in touch?
Survey and measure
Book a visit and we'll come to you. The survey covers measurements, the state of what's there now and any obvious constraints, so the price that follows is based on your actual home, not an average.
Written quote
We turn the survey notes into a written quote. The price is fixed for the specification we agree, and the document sets out materials, scope and payment stages in plain language.
Dates and permissions
Preparation matters as much as the build. We agree access, parking and working hours with you, order materials in good time, and confirm any permissions so the job isn't held up once it starts.
Build and hand over
The work is carried out to the agreed specification, with floors and furniture protected and the site kept tidy. At the end we clean up, walk through the finished job with you and hand over any certificates.
What you can expect from us
Questions about a new front or back door in Shrewsbury
What happens at the survey?
We visit your home at a time that suits you, look at the area involved, take measurements and check access, condition and any services that might be affected. We talk through what you want from a new front or back door, explain the options and answer questions. There is no charge and no obligation; afterwards we send a written quote.
What is the difference between a composite and a uPVC door?
A composite door has a tough outer skin over a solid insulated core, so it feels heavier and more solid than uPVC and holds its colour well. A uPVC door is built from reinforced plastic panels and costs less. Both can have multi-point locking and good weather seals. Many people choose composite for the front door and uPVC for back or side doors, where looks matter less.
How much does a new front door cost?
A new front door costs £1,000–£3,400 supplied and fitted, depending on the material, the amount of glass and whether you want side panels. A uPVC back door sits at the lower end, a composite front door in the middle, and aluminium doors or doors with side panels at the top. Locks, letterplates and dual colours also affect the figure. We confirm a fixed price in writing after measuring your opening.
Can I have a low threshold for wheelchair or pushchair access?
A low threshold is a flat or very shallow sill that makes a doorway easier to cross with a wheelchair, walking frame or pushchair. Most composite, uPVC and aluminium doors can be supplied with one. The outside ground level and drainage need checking, because a low threshold must still keep rainwater out. We look at this during the survey and suggest a channel drain or small ramp if needed.
Who do I deal with during the job?
One point of contact manages your project from survey to handover. They schedule the trades working under our contract, keep you updated on progress, and are the person to call with any question. You don't need to coordinate builders, electricians or decorators separately, because that is part of what we do.
Nearby towns
We welcome enquiries from all SY1, SY2 and SY3 postcodes in Shrewsbury, plus Wellington, Telford and Oswestry. Each one gets the same survey at no charge and a written price fixed for the work described.