A replacement front or back door is a new door and frame, usually composite, uPVC or aluminium, made to fit your existing opening and fitted with multi-point locks and weather seals to improve security, warmth and kerb appeal.
Anyone planning a new front or back door in Aston wants three things: a clear price, a realistic timetable and a tidy job. We publish a guide of £1,000–£3,400 including VAT for the West Midlands up front, explain that work normally takes Usually half a day to one day per door, and confirm both in writing after a free survey of your property.
- Guide price
- £1,000–£3,400 inc VAT
- Time on site
- Usually half a day to one day per door
- Postcodes
- B2, B3, B4, B6 and B7
- Planning rules
- England
- Local area
- Birmingham
- Survey
- Free, with a written quote
Front and back doors prices in Aston
Here is how the guide price for a new front or back door breaks down in Aston. We start from national figures and adjust for the West Midlands, which comes out about 2% below the national guide. The resulting range, VAT included, is £1,000–£3,400, and a survey, at no cost to you, firms it up.
| Type of job | What it usually involves | Guide in Aston |
|---|---|---|
| uPVC back door | A standard uPVC back or side door with a half-glazed panel and multi-point lock. | £800–£1,450 |
| Composite front door | A made-to-measure composite door in your chosen colour, glass design and hardware. | £1,200–£2,400 |
| Aluminium or door with side panels | A premium aluminium door, or a composite door with one or two side panels. | £2,400–£4,900 |
Your price depends mostly on:
- Door material: uPVC, composite or aluminium
- Side panels, fanlights and the amount of glass
- Colour, including different colours inside and out
- Condition of the opening, threshold and surrounding brickwork
What does the job include in Aston?
- Measured survey of the opening, threshold and frame condition
- Multi-point locking with anti-snap cylinders and matching handles
- Glazing panels, side panels or fanlights where specified
- Removal and disposal of the old door and frame
- Weather seals, sealant and internal trims finished neatly
- Building regulations paperwork where a glazed door needs it
Building in Aston
Red-brick Victorian and Edwardian terraces are common in the inner areas of Birmingham, Wolverhampton and the Black Country, ringed by large swathes of 1930s semis with bay windows and hipped roofs. You'll also find post-war council estates, some system-built blocks, Coventry's rebuilt centre and larger detached homes in Solihull and Sutton Coldfield.
An inland climate with regular winter frosts means freeze-thaw damage to soft brick and old mortar is a common reason for repointing and render repairs.
With that background in mind, here is how we typically handle a new front or back door for homes in Aston, from the first visit to the finished result.
Do you need permission in Aston?
Aston is in England, so the planning and building rules set out below are the ones that apply. We confirm the details with the council before we quote.
Replacing windows and doors on a house is usually permitted development in England when the new ones look broadly similar to the old. Flats, listed buildings and homes covered by an Article 4 direction can need consent, and conservation areas may limit materials or styles.
Replacement windows and external doors must meet Building Regulations for energy efficiency, ventilation and, on upper floors, escape. The work is either self-certified by an installer registered with a competent person scheme or signed off by building control.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
How does the job run?
Free site survey
Book a visit and we'll come to you. The survey covers measurements, the state of what's there now and any obvious constraints, so the price that follows is based on your actual home, not an average.
Your fixed price
Next you receive a written quote with a fixed price for the agreed specification. It lists what is included, what is not, and how payments are staged, so you can compare it properly.
Dates and permissions
Next comes planning the work itself. We set a start date that suits you, line up the right trades, and make sure any approvals for a new front or back door are in place before the first day on site.
The work itself
On site, the agreed plan is followed and any change is put in writing first. At completion we do a final clean, go through the snagging list with you and leave you with the relevant documents.
How we work
Frequently asked questions
How long will my home be open while the door is fitted?
Fitting a new door usually takes half a day to a full day, and your home is only open for the short time between taking out the old frame and fixing the new one. We keep the opening covered if there is any delay, and we never leave a doorway insecure overnight. Once the frame is fixed, we hang the door, adjust the locks, seal around the frame and finish the trims.
Can you combine a new front or back door with other work?
Yes. Because we manage several trades under one contract, we can plan a new front or back door alongside other work on your Aston home, such as new windows with rendering, or a kitchen refit with an extension. Combining jobs can reduce repeat set-up such as scaffolding, skips and access, and every element is listed and priced in the same written quote.
What is the difference between a composite and a uPVC door?
A composite door has a tough outer skin over a solid insulated core, so it feels heavier and more solid than uPVC and holds its colour well. A uPVC door is built from reinforced plastic panels and costs less. Both can have multi-point locking and good weather seals. Many people choose composite for the front door and uPVC for back or side doors, where looks matter less.
How long will a new front or back door take?
On a typical home, allow Usually half a day to one day per door. Larger projects, older buildings and extra work found once things are opened up can extend that, while simpler jobs may be shorter. Your quote includes an estimate of time on site, and your point of contact keeps you updated on the programme as the work progresses.
How long does it take to make a new door?
Made-to-measure doors usually take a few weeks to manufacture after the survey and your order are confirmed. Bespoke colours, special glass designs and aluminium doors can take longer. Once the door arrives, we arrange a fitting date that suits you. We give you a realistic lead time with your written quote, and we keep you updated if the manufacturer's dates change.
Near Aston
From B2, B3, B4 and B6 to the edges of Aston and on into Birmingham, Washwood Heath and Smethwick, we can arrange a site visit and a written quote for your project, planned around dates that work for you.