Plastering is applying a smooth finishing coat of plaster to walls and ceilings, either as a thin skim over sound surfaces or as a full re-plaster after removing failed plaster, creating a flat surface ready for decoration.
Looking for plastering and skimming in Argyll and Bute? We organise the whole job, bringing in the trades it needs under one agreement, and you have a single contact. We cover Helensburgh, Dunoon, Oban and Isle of Bute, along with villages and suburbs nearby. The rules in Scotland decide what consents are needed, and our guide range of £550–£1,550 including VAT gives you a realistic starting point for a budget.
- Guide price
- £550–£1,550 inc VAT
- Time on site
- 1–3 days per room, plus drying time
- Planning rules
- Scotland
- Price level
- About 4% below the national guide
- Towns listed
- 4
- Survey
- Free, with a written quote
Plastering and skimming prices in Argyll and Bute
To help you plan, we show what plastering and skimming typically costs in Argyll and Bute instead of holding figures back for a sales call. The range is £550–£1,550 with VAT, using rates in Scotland that are about 4% below the national guide. A free survey then fixes your actual price.
| Type of job | What it usually involves | Guide in Argyll and Bute |
|---|---|---|
| Patch repairs or one wall | Repairing cracks, filling cable channels after a rewire or skimming a single wall. | £150–£500 |
| One room, walls and ceiling | Skimming or boarding and skimming the walls and ceiling of a typical room. | £550–£1,550 |
| Whole house | Skimming or re-plastering most rooms in a typical 3-bed house during a renovation. | £4,800–£11,500 |
The main things that change the figure:
- Total wall and ceiling area to be plastered
- Skim over sound plaster or full re-plaster back to brick
- Ceiling height, stairwells and access
- Removing artex, wallpaper or failed plaster first
What’s included?
- Survey of walls and ceilings, including tap-testing for hollow plaster
- Floor and furniture protection with dust sheets and masking
- Plasterboard fixed to ceilings or walls where needed
- Angle beads and stop beads for straight corners and edges
- Skim coat or full two-coat plaster to agreed areas
- Patching around new sockets, pipes and windows
Housing across Argyll and Bute
Much of Argyll and Bute is rural and coastal, with whitewashed or harled stone cottages, slate roofs and island homes. Helensburgh has Victorian villas, Oban, Dunoon and Rothesay have Victorian seaside terraces, and post-war and newer housing surrounds the main towns.
Stone cottages need lime harling, repointing and slate roof repairs; villas may need roof and window renewal. Island and remote properties need the programme planned around ferries, deliveries and weather.
One of the wettest and windiest parts of the UK, with high exposure on the coast and islands, so roof and render details must suit severe weather.
Planning and building rules in Argyll and Bute
England, Wales, Scotland and Northern Ireland each handle planning a little differently. Argyll and Bute comes under Scotland, covered below, and we raise any questions with the council before your quote is finalised.
Internal improvements do not need planning permission in Scotland unless the building is listed.
Like-for-like kitchen and bathroom replacements do not normally need a building warrant, but structural changes and some drainage or heating alterations do, and electrical work must meet the building standards.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
From survey to handover
A visit to your home
We begin by looking at the job in person. During the free survey we discuss options, materials and budget for plastering and skimming, and photograph or measure anything the quote needs to reflect.
Quote in writing
You get the price in writing, itemised so you can see where the money goes. As long as the specification stays the same, that is the price you pay for plastering and skimming.
Booking the work
Once you accept, we agree start dates, order materials and deal with any planning, building control or neighbour notices the job needs. You'll know who is coming and when before work begins.
On site to finish
On site, the agreed plan is followed and any change is put in writing first. At completion we do a final clean, go through the snagging list with you and leave you with the relevant documents.
What you can expect from us
Questions about plastering and skimming in Argyll and Bute
How long will plastering and skimming take?
On a typical home, allow 1–3 days per room, plus drying time. Larger projects, older buildings and extra work found once things are opened up can extend that, while simpler jobs may be shorter. Your quote includes an estimate of time on site, and your point of contact keeps you updated on the programme as the work progresses.
How much does it cost to plaster a room?
Skimming the walls and ceiling of a typical double bedroom costs £550–£1,550, depending on the room size, the state of the existing surfaces and whether new plasterboard is needed. As a guide, a skim coat costs roughly £15–£35 per square metre, while a full re-plaster back to brick costs more. Stairwells and high ceilings add access costs. We confirm a fixed price after inspecting the walls.
Should older houses be plastered with lime?
Older homes with solid walls and no damp-proof course are often better with lime plaster, because it lets moisture move through the wall and evaporate. Modern gypsum plaster can trap moisture in these walls, which can cause damp patches and blown plaster. Lime takes longer to apply and dry, so it costs more. We check your wall construction before recommending a material.
Do I need planning permission in Argyll and Bute?
It depends on the work, the size of the project, your property type and whether the building is listed or in a conservation area. Argyll and Bute is in Scotland, so Scotland's rules apply. Many smaller jobs need no planning application, but some still need building control approval. We check what applies to your address before quoting.
Can you plaster over artex?
Artex and similar textured ceilings can usually be covered, either by applying a bonding coat and then a skim, or by fixing new plasterboard over the top and skimming that. Some older textured coatings contain hazardous fibres, so they should not be sanded or scraped until a sample has been tested. We can arrange a test before quoting and choose a method that avoids disturbing the coating.
Towns in Argyll and Bute
Below is our list of Argyll and Bute towns for plastering and skimming. If yours isn't shown, we may still cover it, so it is worth asking us directly.