Plastering is applying a smooth finishing coat of plaster to walls and ceilings, either as a thin skim over sound surfaces or as a full re-plaster after removing failed plaster, creating a flat surface ready for decoration.
Whatever type of house you own in Failsworth, we start by looking at how plastering and skimming would fit it rather than offering a standard package. We cover M9, M11, M35 and M40 and neighbouring places such as Droylsden, Chadderton and Ashton-under-Lyne. One named person looks after you from survey to handover, and nothing is booked until you hold our figure in writing, fixed for the work described.
- Guide price
- £500–£1,500 inc VAT
- Time on site
- 1–3 days per room, plus drying time
- Postcodes
- M9, M11, M35, M40 and M43
- Planning rules
- England
- Local area
- Oldham
- Survey
- Free, with a written quote
What should you budget for plastering and skimming in Failsworth?
No two jobs cost exactly the same, but the ranges below give a fair picture of plastering and skimming in Failsworth. Pricing for the North West runs about 5% below the national guide, and the overall guide is £500–£1,500 with VAT included. We'll confirm your figure after surveying the property for free.
| Type of job | What it usually involves | Guide in Failsworth |
|---|---|---|
| Patch repairs or one wall | Repairing cracks, filling cable channels after a rewire or skimming a single wall. | £150–£500 |
| One room, walls and ceiling | Skimming or boarding and skimming the walls and ceiling of a typical room. | £500–£1,500 |
| Whole house | Skimming or re-plastering most rooms in a typical 3-bed house during a renovation. | £4,800–£11,500 |
Your price depends mostly on:
- Total wall and ceiling area to be plastered
- Skim over sound plaster or full re-plaster back to brick
- Ceiling height, stairwells and access
- Removing artex, wallpaper or failed plaster first
Scope of the work
- Survey of walls and ceilings, including tap-testing for hollow plaster
- Floor and furniture protection with dust sheets and masking
- Removal of loose or failed plaster and old wallpaper
- Angle beads and stop beads for straight corners and edges
- Skim coat or full two-coat plaster to agreed areas
- Patching around new sockets, pipes and windows
What are homes like around Failsworth?
Rows of Victorian red-brick terraces fill much of Manchester, Salford and the mill towns, with stone terraces in the Pennine fringes around Oldham and Saddleworth. South Manchester has Edwardian semis and villas, Wythenshawe was built as a large interwar garden suburb, and city-centre apartments and new estates continue to grow.
Two-up two-down terraces commonly suit loft conversions, kitchen extensions and kitchen refits. Many need repointing and roof work, while semis in the suburbs often take side extensions, driveways and replacement windows.
Whatever era your Failsworth home dates from, we plan plastering and skimming around how it is actually built rather than a one-size-fits-all specification.
Planning and building rules in Failsworth
Homes in Failsworth come under the regulations for England, summarised below. We don't rely on general rules alone: we confirm the position for your address with the council before a quote goes out.
Internal work such as a new kitchen, bathroom, flooring, plastering or decorating does not need planning permission in England, unless the house is listed, when listed building consent may be needed even for internal changes.
Some internal work is covered by Building Regulations: new electrical circuits and work in bathrooms (Part P), new drainage, structural changes, extractor ventilation and any new window. Notifiable work is certified by a registered installer or by building control.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
How does the job run?
Free site survey
Book a visit and we'll come to you. The survey covers measurements, the state of what's there now and any obvious constraints, so the price that follows is based on your actual home, not an average.
Your fixed price
We turn the survey notes into a written quote. The price is fixed for the specification we agree, and the document sets out materials, scope and payment stages in plain language.
Dates and permissions
Preparation matters as much as the build. We agree access, parking and working hours with you, order materials in good time, and confirm any permissions so the job isn't held up once it starts.
The work itself
The work is carried out to the agreed specification, with floors and furniture protected and the site kept tidy. At the end we clean up, walk through the finished job with you and hand over any certificates.
How we work
Common questions
When can I paint new plaster?
New plaster can be painted once it is fully dry and evenly pale in colour. The first coat should be a mist coat, which is watered-down emulsion or a specialist primer that soaks into the plaster and seals it. Applying normal emulsion straight on can cause peeling. Vinyl or wipeable paints should be avoided for the first coat, because they stop moisture escaping.
How much does it cost to plaster a room?
Skimming the walls and ceiling of a typical double bedroom costs £500–£1,500, depending on the room size, the state of the existing surfaces and whether new plasterboard is needed. As a guide, a skim coat costs roughly £15–£35 per square metre, while a full re-plaster back to brick costs more. Stairwells and high ceilings add access costs. We confirm a fixed price after inspecting the walls.
Do I need planning permission in Failsworth?
It depends on the work, the size of the project, your property type and whether the building is listed or in a conservation area. Failsworth is in England, so England's rules apply. Many smaller jobs need no planning application, but some still need building control approval. We check what applies to your address before quoting.
What is the difference between skimming and re-plastering?
Skimming applies a thin finishing coat, a few millimetres thick, over plaster or plasterboard that is still sound. Re-plastering removes the old plaster back to the brick or block and applies new base and finishing coats. Skimming is quicker and cheaper, but if the existing plaster is loose, hollow or crumbling, a skim will not hold. We tap-test walls to decide which is needed.
Who do I deal with during the job?
One point of contact manages your project from survey to handover. They schedule the trades working under our contract, keep you updated on progress, and are the person to call with any question. You don't need to coordinate builders, electricians or decorators separately, because that is part of what we do.
Nearby towns
From M9, M11, M35 and M40 to the edges of Failsworth and on into Droylsden, Chadderton and Ashton-under-Lyne, we can arrange a site visit and a written quote for your project, planned around dates that work for you.