Plastering is applying a smooth finishing coat of plaster to walls and ceilings, either as a thin skim over sound surfaces or as a full re-plaster after removing failed plaster, creating a flat surface ready for decoration.
Anyone planning plastering and skimming in Dover wants three things: a clear price, a realistic timetable and a tidy job. We publish a guide of £600–£1,800 including VAT for the South East up front, explain that work normally takes 1–3 days per room, plus drying time, and confirm both in writing after a free survey of your property.
- Guide price
- £600–£1,800 inc VAT
- Time on site
- 1–3 days per room, plus drying time
- Postcodes
- CT14, CT16 and CT17
- Planning rules
- England
- Local area
- Kent
- Survey
- Free, with a written quote
What should you budget for plastering and skimming in Dover?
Budgeting for plastering and skimming in Dover? The numbers below include VAT and are adjusted for the South East, where costs are about 12% above the national guide. The headline range is £600–£1,800. Nothing is final until we have measured up at a free survey and agreed the specification with you.
| Type of job | What it usually involves | Guide in Dover |
|---|---|---|
| Patch repairs or one wall | Repairing cracks, filling cable channels after a rewire or skimming a single wall. | £150–£550 |
| One room, walls and ceiling | Skimming or boarding and skimming the walls and ceiling of a typical room. | £600–£1,800 |
| Whole house | Skimming or re-plastering most rooms in a typical 3-bed house during a renovation. | £5,600–£13,500 |
Your price depends mostly on:
- Skim over sound plaster or full re-plaster back to brick
- Ceiling height, stairwells and access
- Removing artex, wallpaper or failed plaster first
- Number of corners, windows and openings to bead
What’s included?
- Survey of walls and ceilings, including tap-testing for hollow plaster
- Floor and furniture protection with dust sheets and masking
- Removal of loose or failed plaster and old wallpaper
- Skim coat or full two-coat plaster to agreed areas
- Patching around new sockets, pipes and windows
- Waste removal and a tidy finish ready for decorating
Building in Dover
Kent's older buildings include oast houses, weatherboarded cottages, Wealden timber-framed houses and Kentish ragstone walls. Medway towns have long rows of Victorian terraces, Margate and Ramsgate have Regency and Victorian seafronts, and Ashford, Maidstone and Dartford have seen large new estates alongside interwar and post-war housing.
One of England's sunnier, drier counties, but Thanet and the coast are windy, and Weald and London Clay soils can shrink in summer.
These patterns matter for plastering and skimming: older walls, roofs and floors in Dover can need different materials or extra preparation compared with newer homes.
Planning and building rules in Dover
Planning law differs across the UK. For a home in Dover, it is the England rules below that count, and we check them with the council ahead of any quote.
Internal work such as a new kitchen, bathroom, flooring, plastering or decorating does not need planning permission in England, unless the house is listed, when listed building consent may be needed even for internal changes.
Some internal work is covered by Building Regulations: new electrical circuits and work in bathrooms (Part P), new drainage, structural changes, extractor ventilation and any new window. Notifiable work is certified by a registered installer or by building control.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
How does the job run?
We look at the job
A free survey comes first. It gives us what we need to price plastering and skimming properly, including dimensions, existing materials and access for deliveries, and gives you the chance to ask anything you like.
Price and scope agreed
You get the price in writing, itemised so you can see where the money goes. As long as the specification stays the same, that is the price you pay for plastering and skimming.
Booking the work
Next comes planning the work itself. We set a start date that suits you, line up the right trades, and make sure any approvals for plastering and skimming are in place before the first day on site.
Build and hand over
Our trades complete plastering and skimming while your point of contact keeps you updated. When everything is finished, we clear the site, take away waste and go through the result with you before handover.
How we work
Plastering and skimming in Dover: questions
How much will plastering and skimming cost in Dover?
As a guide, expect to pay £600–£1,800 including VAT for plastering and skimming in Dover. That range is adjusted for the South East, which runs about 12% above the national guide. Where your project lands depends on size, materials, access and the condition of what is already there. We confirm a fixed price in writing after a free survey of your home.
What is the difference between skimming and re-plastering?
Skimming applies a thin finishing coat, a few millimetres thick, over plaster or plasterboard that is still sound. Re-plastering removes the old plaster back to the brick or block and applies new base and finishing coats. Skimming is quicker and cheaper, but if the existing plaster is loose, hollow or crumbling, a skim will not hold. We tap-test walls to decide which is needed.
Is the price fixed?
Yes, for the specification we agree. Your written quote sets out exactly what is included at a fixed price. It only changes if you ask for something different, or if a problem the survey could not reasonably reveal later needs extra work. In either case we explain the change and confirm it in writing before going ahead.
Can you plaster over artex?
Artex and similar textured ceilings can usually be covered, either by applying a bonding coat and then a skim, or by fixing new plasterboard over the top and skimming that. Some older textured coatings contain hazardous fibres, so they should not be sanded or scraped until a sample has been tested. We can arrange a test before quoting and choose a method that avoids disturbing the coating.
Why is my plaster cracking?
Fine cracks in new plaster are usually shrinkage cracks from drying too fast and are easily filled before decorating. Cracks along plasterboard joints often mean missing tape or movement in the boards. Larger or diagonal cracks over doors and windows can point to structural movement and should be looked at before re-plastering. We assess cracks during the survey and explain the likely cause.
Near Dover
If your address falls within CT14, CT16 and CT17, we cover it. The same goes for neighbouring Folkestone, Deal and Canterbury, which we include alongside Dover when arranging surveys and quotes.