Plastering is applying a smooth finishing coat of plaster to walls and ceilings, either as a thin skim over sound surfaces or as a full re-plaster after removing failed plaster, creating a flat surface ready for decoration.
Every house in Coalville is a little different, so we never price plastering and skimming from a brochure. We look at the structure, access and existing finishes first, then put in writing a fixed figure for the scope we settle on. As a rough steer, homeowners in the East Midlands should budget £550–£1,550 including VAT, with work typically taking 1–3 days per room, plus drying time.
- Guide price
- £550–£1,550 inc VAT
- Time on site
- 1–3 days per room, plus drying time
- Postcodes
- LE67
- Planning rules
- England
- Local area
- Leicestershire
- Survey
- Free, with a written quote
Plastering and skimming prices in Coalville
No two jobs cost exactly the same, but the ranges below give a fair picture of plastering and skimming in Coalville. Pricing for the East Midlands runs about 4% below the national guide, and the overall guide is £550–£1,550 with VAT included. We'll confirm your figure after surveying the property for free.
| Type of job | What it usually involves | Guide in Coalville |
|---|---|---|
| Patch repairs or one wall | Repairing cracks, filling cable channels after a rewire or skimming a single wall. | £150–£500 |
| One room, walls and ceiling | Skimming or boarding and skimming the walls and ceiling of a typical room. | £550–£1,550 |
| Whole house | Skimming or re-plastering most rooms in a typical 3-bed house during a renovation. | £4,800–£11,500 |
Your price depends mostly on:
- Total wall and ceiling area to be plastered
- Skim over sound plaster or full re-plaster back to brick
- Ceiling height, stairwells and access
- Number of corners, windows and openings to bead
What do you get?
- Survey of walls and ceilings, including tap-testing for hollow plaster
- Floor and furniture protection with dust sheets and masking
- Plasterboard fixed to ceilings or walls where needed
- Angle beads and stop beads for straight corners and edges
- Skim coat or full two-coat plaster to agreed areas
- Patching around new sockets, pipes and windows
Homes in Leicestershire
Leicester has extensive Victorian red-brick terraces and interwar semis, with newer estates on the city's edges. Charnwood granite appears in walls and buildings in the north-west, Swithland slate on older roofs, and villages towards Rutland use ironstone and limestone. Loughborough, Hinckley and Market Harborough mix Victorian centres with post-war and recent housing.
Terraced homes often suit loft rooms and kitchen extensions, and semis commonly take side extensions and garage conversions. Older stone properties may need lime repointing and roof slating repairs.
With that background in mind, here is how we typically handle plastering and skimming for homes in Coalville, from the first visit to the finished result.
Do you need permission in Coalville?
Planning law differs across the UK. For a home in Coalville, it is the England rules below that count, and we check them with the council ahead of any quote.
Internal work such as a new kitchen, bathroom, flooring, plastering or decorating does not need planning permission in England, unless the house is listed, when listed building consent may be needed even for internal changes.
Some internal work is covered by Building Regulations: new electrical circuits and work in bathrooms (Part P), new drainage, structural changes, extractor ventilation and any new window. Notifiable work is certified by a registered installer or by building control.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
What happens after you get in touch?
Survey and measure
First, someone visits your home in Coalville to see the space, take measurements and note anything that could affect the work, such as access or the condition of what is there. There is no charge for this visit.
Your fixed price
After the survey we send a quote for plastering and skimming that fixes the price for the scope we've agreed. If you want to change materials or scope, we revise it in writing before anything is booked.
Plan and prepare
Next comes planning the work itself. We set a start date that suits you, line up the right trades, and make sure any approvals for plastering and skimming are in place before the first day on site.
Build and hand over
Work goes ahead as scheduled and you deal with one contact throughout. When the last trade leaves, we clear and clean the site, talk you through what has been done and pass on any certificates and care instructions.
What you can expect from us
Questions about plastering and skimming in Coalville
How messy is plastering?
Plastering is wet work, so some mess is unavoidable, but good protection keeps it under control. We cover floors with dust sheets, mask sockets, switches and skirting, and move or cover furniture. Removing old plaster creates the most dust, so we seal doorways and keep the area ventilated. At the end, we clear waste and leave the room tidy and ready for decorating.
What happens at the survey?
We visit your home at a time that suits you, look at the area involved, take measurements and check access, condition and any services that might be affected. We talk through what you want from plastering and skimming, explain the options and answer questions. There is no charge and no obligation; afterwards we send a written quote.
Can you plaster over artex?
Artex and similar textured ceilings can usually be covered, either by applying a bonding coat and then a skim, or by fixing new plasterboard over the top and skimming that. Some older textured coatings contain hazardous fibres, so they should not be sanded or scraped until a sample has been tested. We can arrange a test before quoting and choose a method that avoids disturbing the coating.
How long will plastering and skimming take?
On a typical home, allow 1–3 days per room, plus drying time. Larger projects, older buildings and extra work found once things are opened up can extend that, while simpler jobs may be shorter. Your quote includes an estimate of time on site, and your point of contact keeps you updated on the programme as the work progresses.
How much does it cost to plaster a room?
Skimming the walls and ceiling of a typical double bedroom costs £550–£1,550, depending on the room size, the state of the existing surfaces and whether new plasterboard is needed. As a guide, a skim coat costs roughly £15–£35 per square metre, while a full re-plaster back to brick costs more. Stairwells and high ceilings add access costs. We confirm a fixed price after inspecting the walls.
Nearby towns
From LE67 to the edges of Coalville and on into Loughborough, Swadlincote and Earl Shilton, we can arrange a site visit and a written quote for your project, planned around dates that work for you.