Plastering is applying a smooth finishing coat of plaster to walls and ceilings, either as a thin skim over sound surfaces or as a full re-plaster after removing failed plaster, creating a flat surface ready for decoration.
Anyone planning plastering and skimming in Edmonton wants three things: a clear price, a realistic timetable and a tidy job. We publish a guide of £700–£2,100 including VAT for London up front, explain that work normally takes 1–3 days per room, plus drying time, and confirm both in writing after a free survey of your property.
- Guide price
- £700–£2,100 inc VAT
- Time on site
- 1–3 days per room, plus drying time
- Postcodes
- EN1, N9, N13, N17 and N18
- Planning rules
- England
- Local area
- Greater London
- Survey
- Free, with a written quote
What should you budget for plastering and skimming in Edmonton?
In Edmonton, guide figures for plastering and skimming sit at £700–£2,100, VAT included. We set them using rates for London, currently about 30% above the national guide. The table shows what pushes a project towards either end of the range; your own price is set after a free survey.
| Type of job | What it usually involves | Guide in Edmonton |
|---|---|---|
| Patch repairs or one wall | Repairing cracks, filling cable channels after a rewire or skimming a single wall. | £200–£650 |
| One room, walls and ceiling | Skimming or boarding and skimming the walls and ceiling of a typical room. | £700–£2,100 |
| Whole house | Skimming or re-plastering most rooms in a typical 3-bed house during a renovation. | £6,500–£15,500 |
Expect these to shape the final quote:
- Total wall and ceiling area to be plastered
- Skim over sound plaster or full re-plaster back to brick
- Ceiling height, stairwells and access
- Removing artex, wallpaper or failed plaster first
Scope of the work
- Survey of walls and ceilings, including tap-testing for hollow plaster
- Floor and furniture protection with dust sheets and masking
- Removal of loose or failed plaster and old wallpaper
- Plasterboard fixed to ceilings or walls where needed
- Angle beads and stop beads for straight corners and edges
- Skim coat or full two-coat plaster to agreed areas
What are homes like around Edmonton?
London's housing is dominated by Victorian and Edwardian terraces, often in yellow London stock brick, with Georgian terraces in central districts and mansion blocks across many inner areas. Outer boroughs have large belts of interwar semis, and there are extensive post-war council estates. Many houses have been split into flats, and conservation areas are widespread.
London Clay shrinks and swells with the seasons, and street trees close to houses can contribute to movement, which affects foundation design.
So when we survey a Edmonton property for plastering and skimming, the first step is working out how it was built and what has been changed since.
Permissions for plastering and skimming in Edmonton
Which rules apply depends on where you live. For Edmonton, the answer is England, and the points below reflect that; we verify them with the council before quoting.
Internal work such as a new kitchen, bathroom, flooring, plastering or decorating does not need planning permission in England, unless the house is listed, when listed building consent may be needed even for internal changes.
Some internal work is covered by Building Regulations: new electrical circuits and work in bathrooms (Part P), new drainage, structural changes, extractor ventilation and any new window. Notifiable work is certified by a registered installer or by building control.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
The four stages
Survey and measure
We arrange a free site survey on a date convenient to you. We measure up, look at the existing structure and access, and discuss your plans for plastering and skimming so the price reflects your home.
Written quote
We put everything into a written, fixed-price quote: the specification, what's excluded, staged payments and the expected time on site. Take whatever time you need to decide; there's no pressure to commit.
Plan and prepare
Before anyone starts, we confirm the programme in writing, check whether consents are required and arrange deliveries. If a skip or scaffolding on the road needs a permit, we apply for it.
Build and hand over
On site, the agreed plan is followed and any change is put in writing first. At completion we do a final clean, go through the snagging list with you and leave you with the relevant documents.
Why homeowners choose us
Frequently asked questions
How much will plastering and skimming cost in Edmonton?
As a guide, expect to pay £700–£2,100 including VAT for plastering and skimming in Edmonton. That range is adjusted for London, which runs about 30% above the national guide. Where your project lands depends on size, materials, access and the condition of what is already there. We confirm a fixed price in writing after a free survey of your home.
How much does it cost to plaster a room?
Skimming the walls and ceiling of a typical double bedroom costs £700–£2,100, depending on the room size, the state of the existing surfaces and whether new plasterboard is needed. As a guide, a skim coat costs roughly £15–£35 per square metre, while a full re-plaster back to brick costs more. Stairwells and high ceilings add access costs. We confirm a fixed price after inspecting the walls.
What is the difference between skimming and re-plastering?
Skimming applies a thin finishing coat, a few millimetres thick, over plaster or plasterboard that is still sound. Re-plastering removes the old plaster back to the brick or block and applies new base and finishing coats. Skimming is quicker and cheaper, but if the existing plaster is loose, hollow or crumbling, a skim will not hold. We tap-test walls to decide which is needed.
Should older houses be plastered with lime?
Older homes with solid walls and no damp-proof course are often better with lime plaster, because it lets moisture move through the wall and evaporate. Modern gypsum plaster can trap moisture in these walls, which can cause damp patches and blown plaster. Lime takes longer to apply and dry, so it costs more. We check your wall construction before recommending a material.
Do I need planning permission in Edmonton?
It depends on the work, the size of the project, your property type and whether the building is listed or in a conservation area. Edmonton is in England, so England's rules apply. Many smaller jobs need no planning application, but some still need building control approval. We check what applies to your address before quoting.
Near Edmonton
Our coverage in Edmonton includes EN1, N9, N13 and N17. We also travel to Tottenham, Enfield Town and Chingford, so neighbouring addresses are looked after on exactly the same terms as those in town.