Plastering is applying a smooth finishing coat of plaster to walls and ceilings, either as a thin skim over sound surfaces or as a full re-plaster after removing failed plaster, creating a flat surface ready for decoration.
Ilford sits within our coverage for plastering and skimming, as do neighbouring Barking, Becontree and Leytonstone. Before giving a price we want to see the property: the condition of what's there now, the access, and anything that might need extra work. The guide range for London is £700–£2,100 including VAT, and your written quote will spell out exactly what that covers.
- Guide price
- £700–£2,100 inc VAT
- Time on site
- 1–3 days per room, plus drying time
- Postcodes
- IG1, IG2, IG3, IG4 and IG5
- Planning rules
- England
- Local area
- Greater London
- Survey
- Free, with a written quote
What should you budget for plastering and skimming in Ilford?
Below is a breakdown of typical costs for plastering and skimming in Ilford. Because rates in London are about 30% above the national guide, the overall guide comes to £700–£2,100, including VAT. Size, materials and access move the figure, and a free-of-charge survey settles it.
| Type of job | What it usually involves | Guide in Ilford |
|---|---|---|
| Patch repairs or one wall | Repairing cracks, filling cable channels after a rewire or skimming a single wall. | £200–£650 |
| One room, walls and ceiling | Skimming or boarding and skimming the walls and ceiling of a typical room. | £700–£2,100 |
| Whole house | Skimming or re-plastering most rooms in a typical 3-bed house during a renovation. | £6,500–£15,500 |
Expect these to shape the final quote:
- Total wall and ceiling area to be plastered
- Skim over sound plaster or full re-plaster back to brick
- Removing artex, wallpaper or failed plaster first
- Number of corners, windows and openings to bead
Scope of the work
- Floor and furniture protection with dust sheets and masking
- Removal of loose or failed plaster and old wallpaper
- Angle beads and stop beads for straight corners and edges
- Skim coat or full two-coat plaster to agreed areas
- Patching around new sockets, pipes and windows
- Waste removal and a tidy finish ready for decorating
Building in Ilford
London's housing is dominated by Victorian and Edwardian terraces, often in yellow London stock brick, with Georgian terraces in central districts and mansion blocks across many inner areas. Outer boroughs have large belts of interwar semis, and there are extensive post-war council estates. Many houses have been split into flats, and conservation areas are widespread.
London Clay shrinks and swells with the seasons, and street trees close to houses can contribute to movement, which affects foundation design.
Building traditions across London also raise conservation and planning questions, so we check those for plastering and skimming in Ilford at the survey stage.
Do you need permission in Ilford?
Because Ilford falls under England's rules, the guidance below is the version relevant to you. Before sending a price, we check your property's position with the council.
Internal work such as a new kitchen, bathroom, flooring, plastering or decorating does not need planning permission in England, unless the house is listed, when listed building consent may be needed even for internal changes.
Some internal work is covered by Building Regulations: new electrical circuits and work in bathrooms (Part P), new drainage, structural changes, extractor ventilation and any new window. Notifiable work is certified by a registered installer or by building control.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
The four stages
Survey and measure
Book a visit and we'll come to you. The survey covers measurements, the state of what's there now and any obvious constraints, so the price that follows is based on your actual home, not an average.
Quote in writing
You get the price in writing, itemised so you can see where the money goes. As long as the specification stays the same, that is the price you pay for plastering and skimming.
Booking the work
Before anyone starts, we confirm the programme in writing, check whether consents are required and arrange deliveries. If a skip or scaffolding on the road needs a permit, we apply for it.
On site to finish
During the work we protect the areas around it and tidy up at the end of each day. Once complete, we check the finish, remove our materials and hand over paperwork such as building control sign-off where it applies.
Why homeowners choose us
Frequently asked questions
Should older houses be plastered with lime?
Older homes with solid walls and no damp-proof course are often better with lime plaster, because it lets moisture move through the wall and evaporate. Modern gypsum plaster can trap moisture in these walls, which can cause damp patches and blown plaster. Lime takes longer to apply and dry, so it costs more. We check your wall construction before recommending a material.
Can you combine plastering and skimming with other work?
Yes. Because we manage several trades under one contract, we can plan plastering and skimming alongside other work on your Ilford home, such as new windows with rendering, or a kitchen refit with an extension. Combining jobs can reduce repeat set-up such as scaffolding, skips and access, and every element is listed and priced in the same written quote.
What happens at the survey?
We visit your home at a time that suits you, look at the area involved, take measurements and check access, condition and any services that might be affected. We talk through what you want from plastering and skimming, explain the options and answer questions. There is no charge and no obligation; afterwards we send a written quote.
How long does new plaster take to dry?
A skim coat usually dries in a few days in a warm, well-ventilated room, while a full re-plaster can take one to four weeks depending on its thickness and the weather. Plaster turns from dark brown to an even light pink when dry. Keep windows open where possible, but avoid blasting heaters, which can cause cracking. We advise on drying before you decorate.
Can you plaster over artex?
Artex and similar textured ceilings can usually be covered, either by applying a bonding coat and then a skim, or by fixing new plasterboard over the top and skimming that. Some older textured coatings contain hazardous fibres, so they should not be sanded or scraped until a sample has been tested. We can arrange a test before quoting and choose a method that avoids disturbing the coating.
Nearby towns
Addresses in IG1, IG2, IG3 and IG4 are all covered for Ilford, along with Barking, Becontree and Leytonstone close by. Give us your postcode when you get in touch and we will confirm the details.