Mid Glamorgan · Plastering & Decorating

Plastering and skimming in Gelligaer

From the first visit to the final check, plastering and skimming in Gelligaer is planned and managed for you.

Freshly skimmed plaster wall drying, with a hawk and trowel

Free survey in Gelligaer

Tell us about the job and we will be in touch to arrange a visit.

Prefer to talk? Call 0800 088 6341 or start a live chat.

Plastering is applying a smooth finishing coat of plaster to walls and ceilings, either as a thin skim over sound surfaces or as a full re-plaster after removing failed plaster, creating a flat surface ready for decoration.

We take on plastering and skimming throughout Gelligaer and the surrounding CF82 postcodes, as well as in Blackwood, Pontypridd and Caerphilly. The guide range for this work in Wales is £500–£1,450 including VAT; where your project falls depends on its size, the materials you pick and how easy the site is to reach. A free survey turns that range into a fixed figure.

Guide price
£500–£1,450 inc VAT
Time on site
1–3 days per room, plus drying time
Postcodes
CF82
Planning rules
Wales
Local area
Caerphilly
Survey
Free, with a written quote

How much does plastering and skimming cost in Gelligaer?

The table below shows guide prices for plastering and skimming in Gelligaer. They are based on rates in Wales, which run about 8% below the national guide, giving an overall range of £500–£1,450. All figures include VAT and are firmed up after a free site survey.

Type of jobWhat it usually involvesGuide in Gelligaer
Patch repairs or one wallRepairing cracks, filling cable channels after a rewire or skimming a single wall.£150–£450
One room, walls and ceilingSkimming or boarding and skimming the walls and ceiling of a typical room.£500–£1,450
Whole houseSkimming or re-plastering most rooms in a typical 3-bed house during a renovation.£4,600–£11,000

What moves the price up or down:

  • Total wall and ceiling area to be plastered
  • Skim over sound plaster or full re-plaster back to brick
  • Removing artex, wallpaper or failed plaster first
  • Number of corners, windows and openings to bead

What does the job include in Gelligaer?

  • Survey of walls and ceilings, including tap-testing for hollow plaster
  • Plasterboard fixed to ceilings or walls where needed
  • Angle beads and stop beads for straight corners and edges
  • Skim coat or full two-coat plaster to agreed areas
  • Patching around new sockets, pipes and windows
  • Waste removal and a tidy finish ready for decorating
Skim coatA thin finishing coat over sound plaster or plasterboard for a smooth, fresh surface.
Board and skimNew plasterboard fixed over old ceilings or walls, then skimmed, often used over artex.
Full re-plasterOld plaster removed back to brick and replaced with base and finishing coats.
Lime plasterBreathable lime-based plaster suited to older, solid-walled homes.

Homes in Mid Glamorgan

The Rhondda, Cynon and Merthyr valleys are lined with stone terraces built for mining families, stepped along steep hillsides. Pontypridd, Caerphilly and Merthyr Tydfil have Victorian centres, and Bridgend has grown with large modern estates alongside interwar and post-war housing.

The valleys get heavy rainfall and steep, sloping sites are common, so drainage, retaining walls and render specification matter.

Whatever era your Gelligaer home dates from, we plan plastering and skimming around how it is actually built rather than a one-size-fits-all specification.

Planning and building rules in Gelligaer

Which rules apply depends on where you live. For Gelligaer, the answer is Wales, and the points below reflect that; we verify them with the council before quoting.

Internal improvements do not need planning permission in Wales unless the building is listed.

Building Regulations in Wales cover notifiable electrical work, drainage, ventilation and any structural change.

Rules change and every property is different, so we check the planning history and constraints for your address before we quote.

What happens after you get in touch?

  1. Free site survey

    Book a visit and we'll come to you. The survey covers measurements, the state of what's there now and any obvious constraints, so the price that follows is based on your actual home, not an average.

  2. Written quote

    After the survey we send a quote for plastering and skimming that fixes the price for the scope we've agreed. If you want to change materials or scope, we revise it in writing before anything is booked.

  3. Getting ready

    Once you accept, we agree start dates, order materials and deal with any planning, building control or neighbour notices the job needs. You'll know who is coming and when before work begins.

  4. Finish and handover

    Work goes ahead as scheduled and you deal with one contact throughout. When the last trade leaves, we clear and clean the site, talk you through what has been done and pass on any certificates and care instructions.

Working with SK Home Improvements

One point of contactA single named contact handles your project from the first survey to the final handover, so you always know who to call with a question.
Permissions checked firstWe check whether planning permission or building control approval is needed for your property, and handle applications and notices where they apply.
Clear staged paymentsThe quote sets out when each payment falls due, linked to stages of the work, so you know in advance what is owed and when.
Realistic timetablesWe give you an honest estimate of time on site at the quote stage and keep you informed if anything affects the programme once work starts.

Frequently asked questions

When can I paint new plaster?

New plaster can be painted once it is fully dry and evenly pale in colour. The first coat should be a mist coat, which is watered-down emulsion or a specialist primer that soaks into the plaster and seals it. Applying normal emulsion straight on can cause peeling. Vinyl or wipeable paints should be avoided for the first coat, because they stop moisture escaping.

How much will plastering and skimming cost in Gelligaer?

As a guide, expect to pay £500–£1,450 including VAT for plastering and skimming in Gelligaer. That range is adjusted for Wales, which runs about 8% below the national guide. Where your project lands depends on size, materials, access and the condition of what is already there. We confirm a fixed price in writing after a free survey of your home.

Should older houses be plastered with lime?

Older homes with solid walls and no damp-proof course are often better with lime plaster, because it lets moisture move through the wall and evaporate. Modern gypsum plaster can trap moisture in these walls, which can cause damp patches and blown plaster. Lime takes longer to apply and dry, so it costs more. We check your wall construction before recommending a material.

How much does it cost to plaster a room?

Skimming the walls and ceiling of a typical double bedroom costs £500–£1,450, depending on the room size, the state of the existing surfaces and whether new plasterboard is needed. As a guide, a skim coat costs roughly £15–£35 per square metre, while a full re-plaster back to brick costs more. Stairwells and high ceilings add access costs. We confirm a fixed price after inspecting the walls.

What happens at the survey?

We visit your home at a time that suits you, look at the area involved, take measurements and check access, condition and any services that might be affected. We talk through what you want from plastering and skimming, explain the options and answer questions. There is no charge and no obligation; afterwards we send a written quote.

Near Gelligaer

Whether you're in the centre of Gelligaer or on its outskirts, CF82 addresses are covered. We extend the same service, and the same fixed-price approach, to Blackwood, Pontypridd and Caerphilly.

Talk to us about plastering and skimming

Considering plastering and skimming? Homeowners in Gelligaer can request a survey and a fixed-price quote at no cost, or use the online guide-price tool to set a budget first.

Call freeFree quote