Plastering is applying a smooth finishing coat of plaster to walls and ceilings, either as a thin skim over sound surfaces or as a full re-plaster after removing failed plaster, creating a flat surface ready for decoration.
In South Shields, as anywhere in Tyne and Wear, the price of plastering and skimming is driven mainly by size, materials and access. Across the North East our guide sits at £500–£1,450 with VAT, but restricted parking, a narrow side passage or extra preparation can move the figure either way. That is why every price we give follows a visit to the house.
- Guide price
- £500–£1,450 inc VAT
- Time on site
- 1–3 days per room, plus drying time
- Postcodes
- NE29, NE30, NE33 and NE34
- Planning rules
- England
- Local area
- South Tyneside
- Survey
- Free, with a written quote
What should you budget for plastering and skimming in South Shields?
Every figure below is a guide for plastering and skimming in South Shields, inclusive of VAT. Regional pricing for the North East works out about 10% below the national guide, and the overall span is £500–£1,450. The survey costs you nothing, and after it we commit to a firm price for your specification in writing.
| Type of job | What it usually involves | Guide in South Shields |
|---|---|---|
| Patch repairs or one wall | Repairing cracks, filling cable channels after a rewire or skimming a single wall. | £150–£450 |
| One room, walls and ceiling | Skimming or boarding and skimming the walls and ceiling of a typical room. | £500–£1,450 |
| Whole house | Skimming or re-plastering most rooms in a typical 3-bed house during a renovation. | £4,500–£11,000 |
The main things that change the figure:
- Total wall and ceiling area to be plastered
- Skim over sound plaster or full re-plaster back to brick
- Ceiling height, stairwells and access
- Removing artex, wallpaper or failed plaster first
Scope of the work
- Survey of walls and ceilings, including tap-testing for hollow plaster
- Removal of loose or failed plaster and old wallpaper
- Angle beads and stop beads for straight corners and edges
- Skim coat or full two-coat plaster to agreed areas
- Patching around new sockets, pipes and windows
- Waste removal and a tidy finish ready for decorating
Homes in Tyne and Wear
Tyneside flats, pairs of upper and lower flats behind a terraced front, are a distinctive feature of Newcastle and Gateshead. Sunderland is known for its single-storey terraced 'Sunderland cottages', and both cities have Victorian brick and stone terraces, interwar estates and post-war housing. Washington was built as a new town from the 1960s.
Terraces and Tyneside flats commonly need repointing, roof work and window replacement. Houses suit loft rooms and rear extensions, and new-town homes often take garage conversions and cladding upgrades.
In South Shields, as elsewhere in Tyne and Wear, we take the building's age and construction into account before recommending anything, because both can change what is involved in plastering and skimming.
Do you need permission in South Shields?
Each UK nation sets its own consent rules, and South Shields is in England. What follows is a plain summary; we check the specifics for your property with the council before pricing anything.
Internal work such as a new kitchen, bathroom, flooring, plastering or decorating does not need planning permission in England, unless the house is listed, when listed building consent may be needed even for internal changes.
Some internal work is covered by Building Regulations: new electrical circuits and work in bathrooms (Part P), new drainage, structural changes, extractor ventilation and any new window. Notifiable work is certified by a registered installer or by building control.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
What happens after you get in touch?
A visit to your home
We arrange a free site survey on a date convenient to you. We measure up, look at the existing structure and access, and discuss your plans for plastering and skimming so the price reflects your home.
Your fixed price
After the survey we send a quote for plastering and skimming that fixes the price for the scope we've agreed. If you want to change materials or scope, we revise it in writing before anything is booked.
Getting ready
Before anyone starts, we confirm the programme in writing, check whether consents are required and arrange deliveries. If a skip or scaffolding on the road needs a permit, we apply for it.
On site to finish
The job proceeds in the order set out in the programme, with dust and debris kept under control. Finally we tidy away, inspect the work together and pass the finished project over to you with its paperwork.
How we work
Common questions
What is the difference between skimming and re-plastering?
Skimming applies a thin finishing coat, a few millimetres thick, over plaster or plasterboard that is still sound. Re-plastering removes the old plaster back to the brick or block and applies new base and finishing coats. Skimming is quicker and cheaper, but if the existing plaster is loose, hollow or crumbling, a skim will not hold. We tap-test walls to decide which is needed.
Can you plaster over artex?
Artex and similar textured ceilings can usually be covered, either by applying a bonding coat and then a skim, or by fixing new plasterboard over the top and skimming that. Some older textured coatings contain hazardous fibres, so they should not be sanded or scraped until a sample has been tested. We can arrange a test before quoting and choose a method that avoids disturbing the coating.
How long does new plaster take to dry?
A skim coat usually dries in a few days in a warm, well-ventilated room, while a full re-plaster can take one to four weeks depending on its thickness and the weather. Plaster turns from dark brown to an even light pink when dry. Keep windows open where possible, but avoid blasting heaters, which can cause cracking. We advise on drying before you decorate.
Who do I deal with during the job?
One point of contact manages your project from survey to handover. They schedule the trades working under our contract, keep you updated on progress, and are the person to call with any question. You don't need to coordinate builders, electricians or decorators separately, because that is part of what we do.
How long will plastering and skimming take?
On a typical home, allow 1–3 days per room, plus drying time. Larger projects, older buildings and extra work found once things are opened up can extend that, while simpler jobs may be shorter. Your quote includes an estimate of time on site, and your point of contact keeps you updated on the programme as the work progresses.
Also covering areas around South Shields
Coverage for South Shields spans NE29, NE30, NE33 and NE34. Close by, Tynemouth, North Shields and Jarrow are covered too, and the rest of our UK-wide area follows the same survey-then-quote process from start to finish.