Plastering is applying a smooth finishing coat of plaster to walls and ceilings, either as a thin skim over sound surfaces or as a full re-plaster after removing failed plaster, creating a flat surface ready for decoration.
We take on plastering and skimming throughout Salisbury and the surrounding SP1 and SP2 postcodes, as well as in Andover, Totton and Southampton. The guide range for this work in the South West is £550–£1,650 including VAT; where your project falls depends on its size, the materials you pick and how easy the site is to reach. A free survey turns that range into a fixed figure.
- Guide price
- £550–£1,650 inc VAT
- Time on site
- 1–3 days per room, plus drying time
- Postcodes
- SP1 and SP2
- Planning rules
- England
- Local area
- Wiltshire
- Survey
- Free, with a written quote
What should you budget for plastering and skimming in Salisbury?
Prices for plastering and skimming vary from house to house, but in Salisbury most projects fall within £550–£1,650 including VAT. That reflects costs in the South West, about 2% above the national guide. Treat the table as a budgeting aid; the written figure follows a survey we carry out for free.
| Type of job | What it usually involves | Guide in Salisbury |
|---|---|---|
| Patch repairs or one wall | Repairing cracks, filling cable channels after a rewire or skimming a single wall. | £150–£500 |
| One room, walls and ceiling | Skimming or boarding and skimming the walls and ceiling of a typical room. | £550–£1,650 |
| Whole house | Skimming or re-plastering most rooms in a typical 3-bed house during a renovation. | £5,100–£12,000 |
Expect these to shape the final quote:
- Skim over sound plaster or full re-plaster back to brick
- Ceiling height, stairwells and access
- Removing artex, wallpaper or failed plaster first
- Number of corners, windows and openings to bead
What do you get?
- Survey of walls and ceilings, including tap-testing for hollow plaster
- Floor and furniture protection with dust sheets and masking
- Removal of loose or failed plaster and old wallpaper
- Plasterboard fixed to ceilings or walls where needed
- Angle beads and stop beads for straight corners and edges
- Waste removal and a tidy finish ready for decorating
Homes in Wiltshire
Salisbury has medieval and Georgian streets, the north-west around Corsham and Bradford on Avon uses Bath stone, and chalk and flint appear on the downland. Swindon has railway-village terraces and very large post-war and modern estates, and many Wiltshire villages have thatched cottages, some with chalk cob walls.
Cob and Bath stone walls need breathable, lime-based repairs, and thatched cottages may need careful roof work. Swindon's railway terraces suit loft rooms and rear extensions, while its large estates often add garage conversions, driveways and landscaping.
If your house in Salisbury fits one of these patterns, it helps us anticipate what plastering and skimming will involve, though we always confirm the details on site.
Permissions for plastering and skimming in Salisbury
For anyone in Salisbury, the relevant framework is England's. The summary below is general, so we always contact the council about your address before putting a price in writing.
Internal work such as a new kitchen, bathroom, flooring, plastering or decorating does not need planning permission in England, unless the house is listed, when listed building consent may be needed even for internal changes.
Some internal work is covered by Building Regulations: new electrical circuits and work in bathrooms (Part P), new drainage, structural changes, extractor ventilation and any new window. Notifiable work is certified by a registered installer or by building control.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
From survey to handover
We look at the job
We arrange a free site survey on a date convenient to you. We measure up, look at the existing structure and access, and discuss your plans for plastering and skimming so the price reflects your home.
Written quote
We put everything into a written, fixed-price quote: the specification, what's excluded, staged payments and the expected time on site. Take whatever time you need to decide; there's no pressure to commit.
Booking the work
Next comes planning the work itself. We set a start date that suits you, line up the right trades, and make sure any approvals for plastering and skimming are in place before the first day on site.
On site to finish
During the work we protect the areas around it and tidy up at the end of each day. Once complete, we check the finish, remove our materials and hand over paperwork such as building control sign-off where it applies.
What you can expect from us
Frequently asked questions
Is the price fixed?
Yes, for the specification we agree. Your written quote sets out exactly what is included at a fixed price. It only changes if you ask for something different, or if a problem the survey could not reasonably reveal later needs extra work. In either case we explain the change and confirm it in writing before going ahead.
What is the difference between skimming and re-plastering?
Skimming applies a thin finishing coat, a few millimetres thick, over plaster or plasterboard that is still sound. Re-plastering removes the old plaster back to the brick or block and applies new base and finishing coats. Skimming is quicker and cheaper, but if the existing plaster is loose, hollow or crumbling, a skim will not hold. We tap-test walls to decide which is needed.
Can you plaster over artex?
Artex and similar textured ceilings can usually be covered, either by applying a bonding coat and then a skim, or by fixing new plasterboard over the top and skimming that. Some older textured coatings contain hazardous fibres, so they should not be sanded or scraped until a sample has been tested. We can arrange a test before quoting and choose a method that avoids disturbing the coating.
Who do I deal with during the job?
One point of contact manages your project from survey to handover. They schedule the trades working under our contract, keep you updated on progress, and are the person to call with any question. You don't need to coordinate builders, electricians or decorators separately, because that is part of what we do.
Why is my plaster cracking?
Fine cracks in new plaster are usually shrinkage cracks from drying too fast and are easily filled before decorating. Cracks along plasterboard joints often mean missing tape or movement in the boards. Larger or diagonal cracks over doors and windows can point to structural movement and should be looked at before re-plastering. We assess cracks during the survey and explain the likely cause.
Near Salisbury
Our coverage in Salisbury includes SP1 and SP2. We also travel to Andover, Totton and Southampton, so neighbouring addresses are looked after on exactly the same terms as those in town.