England · Building Works

Wall removal and steel beams in Merseyside

Typical time on site: 1–3 weeks including making good. Guide price in Merseyside: £2,800–£7,600 including VAT.

Open-plan kitchen dining room after an internal wall was removed

Free survey in Merseyside

Tell us about the job and we will be in touch to arrange a visit.

Prefer to talk? Call 0800 088 6341 or start a live chat.

Wall removal is taking out an internal wall to open up rooms; where the wall is load-bearing, a steel beam sized by a structural engineer is installed on padstones to carry the weight above, with the work approved by building control.

Merseyside is part of our UK-wide coverage for removing a wall. Places we cover include Liverpool, Birkenhead, St Helens and Southport, and we travel to smaller communities across the area as well. Since your property is in England, the relevant planning and building rules are the ones set there. In the North West, budget around £2,800–£7,600 with VAT; the figure is confirmed after a survey that costs you nothing.

Guide price
£2,800–£7,600 inc VAT
Time on site
1–3 weeks including making good
Planning rules
England
Price level
About 5% below the national guide
Towns listed
21
Survey
Free, with a written quote

How much does removing a wall cost in Merseyside?

What should you budget for removing a wall in Merseyside? Use the figures below as a starting point. Prices in the North West sit about 5% below the national guide, so the range here is £2,800–£7,600 including VAT. Your fixed price comes in writing once we've surveyed the property, at no charge.

Type of jobWhat it usually involvesGuide in Merseyside
Non-load-bearing wallRemoving a stud or block partition and making good walls, ceiling and floor.£750–£1,900
Load-bearing wall up to 4mA typical kitchen-diner knock-through with one steel beam, calculations and building control.£2,800–£7,600
Wide or complex openingOpenings over 4m, posts, flush beams or chimney breast removal.£7,600–£15,000

Your price depends mostly on:

  • Opening width and the load the wall carries
  • Beam size, posts, flush fixing and padstone details
  • Services in the wall that need rerouting
  • Floor and ceiling repairs where the wall stood

What’s included?

  • Survey to establish what the wall supports and where loads go
  • Structural engineer's calculations and beam specification
  • Temporary propping and dust protection during the work
  • Wall taken down and waste removed from site
  • Beam boarded or treated for fire protection
  • Plastering, flooring repairs and making good ready for decorating
Non-load-bearing partitionA stud or block wall that carries no structure, removed with simple making good.
Steel with postsWide openings that need steel posts or columns for support at intermediate points.
Chimney breast removalRemoving a chimney breast with support for the stack above by steel or brackets.
Flush or hidden beamSteel set within the ceiling depth so no downstand is visible, where joists allow.

Homes in Merseyside

Liverpool's housing includes Georgian terraces near the centre, large areas of Victorian red-brick terraces, Edwardian semis in the suburbs and big interwar council estates. The Wirral has Victorian villas and interwar semis, Southport has Victorian villas and bungalows, and St Helens and Knowsley have post-war estates and newer housing.

Terraces suit loft rooms, kitchen extensions and repointing, and many need their roofs and windows renewed. Suburban semis commonly take side extensions, driveways and porches.

Coastal areas on the Wirral and Sefton coast are exposed to salt and wind, and the region gets frequent rain off the Irish Sea.

Planning and building rules in Merseyside

Planning law differs across the UK. For a home in Merseyside, it is the England rules below that count, and we check them with the council ahead of any quote.

Removing an internal wall does not need planning permission in England unless the house is listed.

If the wall is load-bearing, Building Regulations approval is needed, with a structural engineer’s calculations for the steel beam and padstones. Where the beam bears on a shared wall, the Party Wall etc. Act 1996 applies.

Rules change and every property is different, so we check the planning history and constraints for your address before we quote.

From survey to handover

  1. Free site survey

    Book a visit and we'll come to you. The survey covers measurements, the state of what's there now and any obvious constraints, so the price that follows is based on your actual home, not an average.

  2. Price and scope agreed

    We put everything into a written, fixed-price quote: the specification, what's excluded, staged payments and the expected time on site. Take whatever time you need to decide; there's no pressure to commit.

  3. Getting ready

    Before anyone starts, we confirm the programme in writing, check whether consents are required and arrange deliveries. If a skip or scaffolding on the road needs a permit, we apply for it.

  4. Finish and handover

    During the work we protect the areas around it and tidy up at the end of each day. Once complete, we check the finish, remove our materials and hand over paperwork such as building control sign-off where it applies.

How we work

Changes agreed in writingIf something needs to change once work is under way, we explain why and confirm the cost or saving in writing before carrying on.
Coverage across the UKWe take on projects in England, Wales, Scotland and Northern Ireland, and plan each one under the rules for the nation it is in.
One contract, several tradesJobs that need builders, plasterers, electricians and decorators come under a single contract, so you are not coordinating separate firms yourself.
Plain-English adviceWe explain options, materials and trade-offs without jargon, so you can make decisions about your home with a clear picture of what each choice means.

Frequently asked questions

Who do I deal with during the job?

One point of contact manages your project from survey to handover. They schedule the trades working under our contract, keep you updated on progress, and are the person to call with any question. You don't need to coordinate builders, electricians or decorators separately, because that is part of what we do.

What is a steel beam and why is it needed?

A steel beam, often called an RSJ, is a strong steel section installed where a load-bearing wall used to be, so the weight above is carried across the opening to the walls at each end. It sits on padstones that spread the load. The size depends on the span and the load, which a structural engineer calculates. The beam is then boxed in or plastered.

Can I have a beam that does not show?

A flush or hidden beam sits within the depth of the ceiling so there is no visible downstand, giving a clean, open look. It is possible where the floor joists can be connected into the side of the beam, which takes more steel and labour. It costs more than a standard beam below the ceiling. The engineer confirms whether it suits your house.

What happens at the survey?

We visit your home at a time that suits you, look at the area involved, take measurements and check access, condition and any services that might be affected. We talk through what you want from removing a wall, explain the options and answer questions. There is no charge and no obligation; afterwards we send a written quote.

How disruptive is removing a wall?

Removing a wall is dusty and noisy, but the most disruptive part is short, usually one to three days for propping, demolition and installing the steel. We seal doorways with dust screens, protect floors and keep a safe route through the house. Making good, plastering and floor repairs follow over the next week or two. Most people stay at home throughout.

Towns in Merseyside

Below is our list of Merseyside towns for removing a wall. If yours isn't shown, we may still cover it, so it is worth asking us directly.

Ready for a written price?

Considering removing a wall? Homeowners in Merseyside can request a survey and a fixed-price quote at no cost, or use the online guide-price tool to set a budget first.

Call freeFree quote