Wall removal is taking out an internal wall to open up rooms; where the wall is load-bearing, a steel beam sized by a structural engineer is installed on padstones to carry the weight above, with the work approved by building control.
If you live in Solihull and are weighing up removing a wall, the starting point is a visit to measure up and talk through what you want, which costs nothing. We cover homes across B90, B91 and B92, and a typical project of this kind in the West Midlands lands somewhere in the £2,900–£7,800 bracket, including VAT. The exact figure depends on size, access and the finish you choose.
- Guide price
- £2,900–£7,800 inc VAT
- Time on site
- 1–3 weeks including making good
- Postcodes
- B90, B91 and B92
- Planning rules
- England
- Local area
- West Midlands
- Survey
- Free, with a written quote
What should you budget for removing a wall in Solihull?
The costs listed here are typical for removing a wall around Solihull and include VAT. They reflect labour and material costs in the West Midlands, about 2% below the national guide, giving a range of £2,900–£7,800. Exact pricing depends on your home, so we only fix it once a free site survey is done.
| Type of job | What it usually involves | Guide in Solihull |
|---|---|---|
| Non-load-bearing wall | Removing a stud or block partition and making good walls, ceiling and floor. | £800–£1,950 |
| Load-bearing wall up to 4m | A typical kitchen-diner knock-through with one steel beam, calculations and building control. | £2,900–£7,800 |
| Wide or complex opening | Openings over 4m, posts, flush beams or chimney breast removal. | £7,800–£15,500 |
The main things that change the figure:
- Opening width and the load the wall carries
- Services in the wall that need rerouting
- Floor and ceiling repairs where the wall stood
- Engineer, building control and any party wall costs
What do you get?
- Survey to establish what the wall supports and where loads go
- Structural engineer's calculations and beam specification
- Building control application and inspections
- Wall taken down and waste removed from site
- Beam boarded or treated for fire protection
- Plastering, flooring repairs and making good ready for decorating
Building in Solihull
Red-brick Victorian and Edwardian terraces are common in the inner areas of Birmingham, Wolverhampton and the Black Country, ringed by large swathes of 1930s semis with bay windows and hipped roofs. You'll also find post-war council estates, some system-built blocks, Coventry's rebuilt centre and larger detached homes in Solihull and Sutton Coldfield.
An inland climate with regular winter frosts means freeze-thaw damage to soft brick and old mortar is a common reason for repointing and render repairs.
That mix of housing shapes how we approach removing a wall in Solihull: the age and construction of your home affect the materials, the method and, in the end, the price.
Planning and building rules in Solihull
For anyone in Solihull, the relevant framework is England's. The summary below is general, so we always contact the council about your address before putting a price in writing.
Removing an internal wall does not need planning permission in England unless the house is listed.
If the wall is load-bearing, Building Regulations approval is needed, with a structural engineer’s calculations for the steel beam and padstones. Where the beam bears on a shared wall, the Party Wall etc. Act 1996 applies.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
From survey to handover
Free site survey
We arrange a free site survey on a date convenient to you. We measure up, look at the existing structure and access, and discuss your plans for removing a wall so the price reflects your home.
Quote in writing
We turn the survey notes into a written quote. The price is fixed for the specification we agree, and the document sets out materials, scope and payment stages in plain language.
Booking the work
Next comes planning the work itself. We set a start date that suits you, line up the right trades, and make sure any approvals for removing a wall are in place before the first day on site.
The work itself
On site, the agreed plan is followed and any change is put in writing first. At completion we do a final clean, go through the snagging list with you and leave you with the relevant documents.
What you can expect from us
Frequently asked questions
How much does it cost to remove a load-bearing wall?
Removing a load-bearing wall of about 3–4m with a steel beam typically costs £2,900–£7,800, including structural calculations, building control and making good. A non-load-bearing partition costs much less. As a rough guide, allow around £600–£1,600 per metre of opening plus fixed costs for the engineer, approvals and propping. Wider openings, posts and flush beams cost more. We confirm a fixed price after the survey.
Is the price fixed?
Yes, for the specification we agree. Your written quote sets out exactly what is included at a fixed price. It only changes if you ask for something different, or if a problem the survey could not reasonably reveal later needs extra work. In either case we explain the change and confirm it in writing before going ahead.
Which postcodes in Solihull do you cover?
We cover B90, B91 and B92, along with the rest of West Midlands. If your postcode is not listed, get in touch anyway: our coverage is UK-wide, and we can usually arrange a survey wherever you live. Enter your postcode in the guide-price tool or contact form and we will confirm.
How do I know if a wall is load-bearing?
A wall is load-bearing if it carries weight from above, such as floor joists, another wall, the roof or a chimney. Clues include joists running across the wall rather than alongside it, and walls lined up with walls on the floor above. Brick or block walls are often structural but not always. We check from above and below during the survey, and an engineer confirms the design.
Can I have a beam that does not show?
A flush or hidden beam sits within the depth of the ceiling so there is no visible downstand, giving a clean, open look. It is possible where the floor joists can be connected into the side of the beam, which takes more steel and labour. It costs more than a standard beam below the ceiling. The engineer confirms whether it suits your house.
Nearby towns
Coverage for Solihull spans B90, B91 and B92. Close by, Shirley, Acocks Green and Washwood Heath are covered too, and the rest of our UK-wide area follows the same survey-then-quote process from start to finish.