A bathroom installation replaces your old suite with new sanitaryware, a bath or shower, tiling and fittings, including the plumbing, electrics, ventilation and waterproofing needed for a complete, watertight room.
In Renfrewshire and Inverclyde, we price a new bathroom against our guide for Scotland, £4,800–£11,500 including VAT, then adjust it once we have surveyed your home. We work across Paisley, Greenock, Newton Mearns and Renfrew and the rest of the county or region. Planning and building control requirements follow the rules for Scotland, and we look into your property's position before a written quote is sent.
- Guide price
- £4,800–£11,500 inc VAT
- Time on site
- 1–2 weeks per bathroom
- Planning rules
- Scotland
- Price level
- About 4% below the national guide
- Towns listed
- 7
- Survey
- Free, with a written quote
How much does a new bathroom cost in Renfrewshire and Inverclyde?
The table below shows guide prices for a new bathroom in Renfrewshire and Inverclyde. They are based on rates in Scotland, which run about 4% below the national guide, giving an overall range of £4,800–£11,500. All figures include VAT and are firmed up after a free site survey.
| Type of job | What it usually involves | Guide in Renfrewshire and Inverclyde |
|---|---|---|
| Shower room or en-suite | A compact room with a shower, basin and toilet, keeping the existing layout. | £3,800–£7,700 |
| Family bathroom | A full suite with bath and shower, new tiling, lighting and an extractor fan. | £4,800–£11,500 |
| Premium bathroom or wet room | Standalone bath, wet room or walk-in shower, underfloor heating and large-format tiles. | £11,500–£19,000 |
Your price depends mostly on:
- Room size and the amount of tiling
- Suite, shower and tap specification
- Moving the toilet, bath or shower to a new position
- Condition of the floor, walls and existing pipework
What’s included?
- Removal and disposal of the old suite and tiles
- New supply and waste pipework, including concealed fittings
- Electrics, lighting and extractor fan by qualified trades, with certificates
- Wall and floor tiling to your chosen design
- Bath or shower, basin, toilet and taps fitted and tested
- Heated towel rail, silicone sealing and a final clean
Housing across Renfrewshire and Inverclyde
Paisley has sandstone tenements and terraces from its textile era, Greenock and Port Glasgow have tenements and housing climbing the hills above the Clyde, and Gourock and Kilmacolm have Victorian villas. Post-war estates and newer private housing surround the towns, and roughcast is a common finish.
Roughcast and tenement buildings commonly need re-rendering, window replacement and roof work. Villas suit kitchen extensions and landscaping, and semis often take loft conversions and driveways.
Inverclyde is one of the wettest parts of lowland Scotland, and homes facing the Firth of Clyde take wind and driving rain.
Planning and building rules in Renfrewshire and Inverclyde
Renfrewshire and Inverclyde is in Scotland, so the planning and building rules set out below are the ones that apply. We confirm the details with the council before we quote.
Internal improvements do not need planning permission in Scotland unless the building is listed.
Like-for-like kitchen and bathroom replacements do not normally need a building warrant, but structural changes and some drainage or heating alterations do, and electrical work must meet the building standards.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
The four stages
Survey and measure
Book a visit and we'll come to you. The survey covers measurements, the state of what's there now and any obvious constraints, so the price that follows is based on your actual home, not an average.
Quote in writing
After the survey we send a quote for a new bathroom that fixes the price for the scope we've agreed. If you want to change materials or scope, we revise it in writing before anything is booked.
Plan and prepare
We handle the paperwork side: checking whether planning permission or building control approval is needed, submitting applications where they are, and scheduling the trades and materials around your dates.
The work itself
During the work we protect the areas around it and tidy up at the end of each day. Once complete, we check the finish, remove our materials and hand over paperwork such as building control sign-off where it applies.
How we work
Questions about a new bathroom in Renfrewshire and Inverclyde
Do I need planning permission in Renfrewshire and Inverclyde?
It depends on the work, the size of the project, your property type and whether the building is listed or in a conservation area. Renfrewshire and Inverclyde is in Scotland, so Scotland's rules apply. Many smaller jobs need no planning application, but some still need building control approval. We check what applies to your address before quoting.
How much will a new bathroom cost in Renfrewshire and Inverclyde?
As a guide, expect to pay £4,800–£11,500 including VAT for a new bathroom in Renfrewshire and Inverclyde. That range is adjusted for Scotland, which runs about 4% below the national guide. Where your project lands depends on size, materials, access and the condition of what is already there. We confirm a fixed price in writing after a free survey of your home.
Which tiles are easiest to keep clean?
Large-format porcelain tiles are usually easiest to keep clean, because there are fewer grout lines to collect dirt and porcelain absorbs very little water. Glossy tiles show water marks more than matt ones, while textured floor tiles give better grip. Grout colour matters too: mid-grey hides staining better than white. We can suggest anti-slip ratings and grout options that suit how you use the room.
Can I move the toilet to a different position?
Moving a toilet is usually possible, but it is limited by the soil pipe, which needs a large-diameter pipe with a steady fall to the soil stack. Short moves along the same wall are often simple, while moving it across the room may mean lifting floors or boxing in pipework. A macerator pump is an option where gravity will not work. We check the stack position during the survey.
What ventilation does a bathroom need?
A bathroom needs mechanical ventilation, usually an extractor fan, to remove steam and help prevent condensation and mould. Building regulations set minimum extraction rates for new or refitted bathrooms. A fan linked to the light with an overrun timer, or one with a humidity sensor, works well. Ducting should vent outside by the shortest practical route. We include a suitable fan in every bathroom quote.
Towns in Renfrewshire and Inverclyde
Our coverage for a new bathroom in Renfrewshire and Inverclyde includes the towns listed here. Each page explains guide costs, typical timings and the neighbouring places we also serve.