Repointing is raking out old, crumbling mortar from between bricks and replacing it with fresh mortar, sealing the joints against rain and protecting the wall; brickwork repairs replace spalled or cracked bricks and rebuild damaged sections.
Renfrewshire and Inverclyde is part of our UK-wide coverage for brickwork and repointing. Places we cover include Paisley, Greenock, Newton Mearns and Renfrew, and we travel to smaller communities across the area as well. Since your property is in Scotland, the relevant planning and building rules are the ones set there. In Scotland, budget around £2,400–£5,800 with VAT; the figure is confirmed after a survey that costs you nothing.
- Guide price
- £2,400–£5,800 inc VAT
- Time on site
- 3–10 days for a typical house
- Planning rules
- Scotland
- Price level
- About 4% below the national guide
- Towns listed
- 7
- Survey
- Free, with a written quote
How much does brickwork and repointing cost in Renfrewshire and Inverclyde?
Every figure below is a guide for brickwork and repointing in Renfrewshire and Inverclyde, inclusive of VAT. Regional pricing for Scotland works out about 4% below the national guide, and the overall span is £2,400–£5,800. The survey costs you nothing, and after it we commit to a firm price for your specification in writing.
| Type of job | What it usually involves | Guide in Renfrewshire and Inverclyde |
|---|---|---|
| Chimney or small area | Repointing a chimney stack, gable or single wall, including access. | £600–£1,750 |
| Typical semi-detached | Repointing the main elevations of a 3-bed semi, including scaffolding. | £2,400–£5,800 |
| Detached or lime work | Larger houses, or period homes repointed in lime with brick repairs. | £4,800–£9,600 |
What moves the price up or down:
- Wall area to repoint and the height of the house
- Number of bricks to replace and how well they match
- Scaffolding and access, including chimneys
- Condition of the existing mortar and how hard it is to remove
What do you get?
- Survey of mortar, bricks, cracks and the cause of any damp
- Raking out old mortar to the correct depth
- Mortar mixed to suit the wall, in lime or cement
- Colour and joint style matched as closely as possible
- Replacement of spalled or cracked bricks
- Clean-down of brick faces after pointing
Homes in Renfrewshire and Inverclyde
Paisley has sandstone tenements and terraces from its textile era, Greenock and Port Glasgow have tenements and housing climbing the hills above the Clyde, and Gourock and Kilmacolm have Victorian villas. Post-war estates and newer private housing surround the towns, and roughcast is a common finish.
Roughcast and tenement buildings commonly need re-rendering, window replacement and roof work. Villas suit kitchen extensions and landscaping, and semis often take loft conversions and driveways.
Inverclyde is one of the wettest parts of lowland Scotland, and homes facing the Firth of Clyde take wind and driving rain.
Do you need permission in Renfrewshire and Inverclyde?
Homes in Renfrewshire and Inverclyde come under the regulations for Scotland, summarised below. We don't rely on general rules alone: we confirm the position for your address with the council before a quote goes out.
In Scotland, repointing and like-for-like masonry repairs are maintenance; listed buildings and conservation areas may need consent if materials or appearance change.
A building warrant is not normally needed for repointing; structural rebuilding of walls or chimneys can need one.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
How does the job run?
We look at the job
A free survey comes first. It gives us what we need to price brickwork and repointing properly, including dimensions, existing materials and access for deliveries, and gives you the chance to ask anything you like.
Price and scope agreed
Next you receive a written quote with a fixed price for the agreed specification. It lists what is included, what is not, and how payments are staged, so you can compare it properly.
Dates and permissions
We handle the paperwork side: checking whether planning permission or building control approval is needed, submitting applications where they are, and scheduling the trades and materials around your dates.
Build and hand over
The job proceeds in the order set out in the programme, with dust and debris kept under control. Finally we tidy away, inspect the work together and pass the finished project over to you with its paperwork.
What you can expect from us
Frequently asked questions
Who do I deal with during the job?
One point of contact manages your project from survey to handover. They schedule the trades working under our contract, keep you updated on progress, and are the person to call with any question. You don't need to coordinate builders, electricians or decorators separately, because that is part of what we do.
What happens at the survey?
We visit your home at a time that suits you, look at the area involved, take measurements and check access, condition and any services that might be affected. We talk through what you want from brickwork and repointing, explain the options and answer questions. There is no charge and no obligation; afterwards we send a written quote.
Is repointing messy or noisy?
Raking out old mortar is noisy and dusty, especially when power tools are used on hard mortar. We sheet scaffolding to contain dust, keep windows closed nearby and clear up at the end of each day. The noisy phase moves around the house elevation by elevation. Inside, you may notice some dust on windowsills, so it helps to keep windows shut.
When is the right time of year to repoint?
Repointing should be done in mild, dry weather, usually spring to early autumn. Fresh mortar must be kept from frost while it cures, and lime mortar in particular needs protection from frost, rain and strong sun for several days. We cover fresh work with hessian or sheeting where needed and plan the job around the forecast.
Can you match the colour of my existing mortar?
Matching mortar colour is done by choosing the right sand and, where needed, adding pigment or using a coloured lime. We make test panels and let them dry, because mortar looks darker when wet. The joint style, such as flush, bucket handle or weatherstruck, also affects the look. An exact match is not always possible on old walls, but a careful match blends in well.
Towns in Renfrewshire and Inverclyde
Our coverage for brickwork and repointing in Renfrewshire and Inverclyde includes the towns listed here. Each page explains guide costs, typical timings and the neighbouring places we also serve.