Mid Glamorgan · Building Works

Brickwork and repointing in Gelligaer

Guide price £2,300–£5,500 including VAT, typically 3–10 days for a typical house, with a free site survey and a written fixed price.

Close-up of freshly repointed red brickwork

Free survey in Gelligaer

Tell us about the job and we will be in touch to arrange a visit.

Prefer to talk? Call 0800 088 6341 or start a live chat.

Repointing is raking out old, crumbling mortar from between bricks and replacing it with fresh mortar, sealing the joints against rain and protecting the wall; brickwork repairs replace spalled or cracked bricks and rebuild damaged sections.

We take on brickwork and repointing throughout Gelligaer and the surrounding CF82 postcodes, as well as in Blackwood, Pontypridd and Caerphilly. The guide range for this work in Wales is £2,300–£5,500 including VAT; where your project falls depends on its size, the materials you pick and how easy the site is to reach. A free survey turns that range into a fixed figure.

Guide price
£2,300–£5,500 inc VAT
Time on site
3–10 days for a typical house
Postcodes
CF82
Planning rules
Wales
Local area
Caerphilly
Survey
Free, with a written quote

How much does brickwork and repointing cost in Gelligaer?

In Gelligaer, guide figures for brickwork and repointing sit at £2,300–£5,500, VAT included. We set them using rates for Wales, currently about 8% below the national guide. The table shows what pushes a project towards either end of the range; your own price is set after a free survey.

Type of jobWhat it usually involvesGuide in Gelligaer
Chimney or small areaRepointing a chimney stack, gable or single wall, including access.£550–£1,650
Typical semi-detachedRepointing the main elevations of a 3-bed semi, including scaffolding.£2,300–£5,500
Detached or lime workLarger houses, or period homes repointed in lime with brick repairs.£4,600–£9,200

Your price depends mostly on:

  • Mortar type: cement or lime, and joint style
  • Number of bricks to replace and how well they match
  • Scaffolding and access, including chimneys
  • Condition of the existing mortar and how hard it is to remove

What do you get?

  • Scaffolding or access towers where needed
  • Raking out old mortar to the correct depth
  • Mortar mixed to suit the wall, in lime or cement
  • Colour and joint style matched as closely as possible
  • Replacement of spalled or cracked bricks
  • Clean-down of brick faces after pointing
Patch repointingRepointing only the worst areas, such as a chimney, gable or around a downpipe.
Full elevation repointingRepointing an entire wall or the whole house for a uniform, weathertight finish.
Lime repointingBreathable lime mortar for older, solid-walled homes built with soft bricks.
Brick replacementCutting out spalled or cracked bricks and fitting matching reclaimed or new bricks.

Building in Gelligaer

The Rhondda, Cynon and Merthyr valleys are lined with stone terraces built for mining families, stepped along steep hillsides. Pontypridd, Caerphilly and Merthyr Tydfil have Victorian centres, and Bridgend has grown with large modern estates alongside interwar and post-war housing.

Valley terraces commonly need repointing, roof repairs, rendering and window replacement, and loft conversions can add useful space. Newer estate homes often take garage conversions, porches and landscaping.

With that background in mind, here is how we typically handle brickwork and repointing for homes in Gelligaer, from the first visit to the finished result.

Permissions for brickwork and repointing in Gelligaer

Planning law differs across the UK. For a home in Gelligaer, it is the Wales rules below that count, and we check them with the council ahead of any quote.

In Wales, repointing and like-for-like brick repairs are maintenance and do not need planning permission; listed buildings may need consent for changes in materials.

Building Regulations do not normally apply to repointing, though structural rebuilding can.

Rules change and every property is different, so we check the planning history and constraints for your address before we quote.

From survey to handover

  1. We look at the job

    We arrange a free site survey on a date convenient to you. We measure up, look at the existing structure and access, and discuss your plans for brickwork and repointing so the price reflects your home.

  2. Written quote

    We put everything into a written, fixed-price quote: the specification, what's excluded, staged payments and the expected time on site. Take whatever time you need to decide; there's no pressure to commit.

  3. Dates and permissions

    With the quote agreed, we book the work in and handle preparation: permissions where needed, building control notifications, material orders and access arrangements for your Gelligaer property.

  4. Finish and handover

    Work goes ahead as scheduled and you deal with one contact throughout. When the last trade leaves, we clear and clean the site, talk you through what has been done and pass on any certificates and care instructions.

How we work

Permissions checked firstWe check whether planning permission or building control approval is needed for your property, and handle applications and notices where they apply.
Tidy, protected work areasFloors, furniture and access routes are covered and protected while we work, and the site is tidied at the end of every working day.
Changes agreed in writingIf something needs to change once work is under way, we explain why and confirm the cost or saving in writing before carrying on.
A proper handoverAt the end we clear the site, show you round the finished work and pass on documents like a building control completion certificate.

Common questions

Is repointing messy or noisy?

Raking out old mortar is noisy and dusty, especially when power tools are used on hard mortar. We sheet scaffolding to contain dust, keep windows closed nearby and clear up at the end of each day. The noisy phase moves around the house elevation by elevation. Inside, you may notice some dust on windowsills, so it helps to keep windows shut.

When is the right time of year to repoint?

Repointing should be done in mild, dry weather, usually spring to early autumn. Fresh mortar must be kept from frost while it cures, and lime mortar in particular needs protection from frost, rain and strong sun for several days. We cover fresh work with hessian or sheeting where needed and plan the job around the forecast.

Who do I deal with during the job?

One point of contact manages your project from survey to handover. They schedule the trades working under our contract, keep you updated on progress, and are the person to call with any question. You don't need to coordinate builders, electricians or decorators separately, because that is part of what we do.

Can you match the colour of my existing mortar?

Matching mortar colour is done by choosing the right sand and, where needed, adding pigment or using a coloured lime. We make test panels and let them dry, because mortar looks darker when wet. The joint style, such as flush, bucket handle or weatherstruck, also affects the look. An exact match is not always possible on old walls, but a careful match blends in well.

How much will brickwork and repointing cost in Gelligaer?

As a guide, expect to pay £2,300–£5,500 including VAT for brickwork and repointing in Gelligaer. That range is adjusted for Wales, which runs about 8% below the national guide. Where your project lands depends on size, materials, access and the condition of what is already there. We confirm a fixed price in writing after a free survey of your home.

Also covering areas around Gelligaer

We survey and quote throughout Gelligaer's CF82 postcodes and in surrounding places such as Blackwood, Pontypridd and Caerphilly. The process and pricing approach are identical in each of them.

Talk to us about brickwork and repointing

Ready to talk about brickwork and repointing in Gelligaer? Book a free site survey and we'll send you a written, fixed-price quote for the specification you choose.

Call freeFree quote