Repointing is raking out old, crumbling mortar from between bricks and replacing it with fresh mortar, sealing the joints against rain and protecting the wall; brickwork repairs replace spalled or cracked bricks and rebuild damaged sections.
Getting brickwork and repointing right in Burntwood starts with understanding the house you already have: its age, how it was built and what has been altered over the years. We survey first, then commit on paper to a price that holds as long as the scope stays the same. Across the West Midlands, guide prices run at £2,400–£5,900 including VAT, and homes in Great Wyrley, Lichfield and Cannock are covered too.
- Guide price
- £2,400–£5,900 inc VAT
- Time on site
- 3–10 days for a typical house
- Postcodes
- WS7
- Planning rules
- England
- Local area
- Staffordshire
- Survey
- Free, with a written quote
What should you budget for brickwork and repointing in Burntwood?
What should you budget for brickwork and repointing in Burntwood? Use the figures below as a starting point. Prices in the West Midlands sit about 2% below the national guide, so the range here is £2,400–£5,900 including VAT. Your fixed price comes in writing once we've surveyed the property, at no charge.
| Type of job | What it usually involves | Guide in Burntwood |
|---|---|---|
| Chimney or small area | Repointing a chimney stack, gable or single wall, including access. | £600–£1,750 |
| Typical semi-detached | Repointing the main elevations of a 3-bed semi, including scaffolding. | £2,400–£5,900 |
| Detached or lime work | Larger houses, or period homes repointed in lime with brick repairs. | £4,900–£9,800 |
Expect these to shape the final quote:
- Wall area to repoint and the height of the house
- Mortar type: cement or lime, and joint style
- Number of bricks to replace and how well they match
- Scaffolding and access, including chimneys
What does the job include in Burntwood?
- Survey of mortar, bricks, cracks and the cause of any damp
- Scaffolding or access towers where needed
- Mortar mixed to suit the wall, in lime or cement
- Replacement of spalled or cracked bricks
- Clean-down of brick faces after pointing
- Waste removal and a tidy site
Local housing and brickwork and repointing
Stoke-on-Trent has long rows of Victorian terraces from its pottery industry, often in red brick with Staffordshire blue brick details. Stafford, Lichfield and Tamworth mix Georgian and Victorian centres with interwar and post-war estates, Burton has brewery-era terraces, and the Staffordshire Moorlands around Leek use local gritstone.
Potteries terraces suit attic rooms, rear extensions and repointing; many need roof and window renewal. Semis and estate homes commonly take side extensions and driveways, and Moorlands stone homes call for lime work.
Knowing the typical building types in Staffordshire helps, but a survey of your own home in Burntwood is what decides the right approach to brickwork and repointing.
Permissions for brickwork and repointing in Burntwood
Which rules apply depends on where you live. For Burntwood, the answer is England, and the points below reflect that; we verify them with the council before quoting.
Repointing and repairing brickwork with matching materials is maintenance, so it does not need planning permission in England. On a listed building, work that affects its character, including a change of mortar or brick, may need listed building consent.
Building Regulations do not normally apply to repointing or brick repairs, but rebuilding a wall, chimney or structural section can need building control involvement.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
How does the job run?
A visit to your home
A free survey comes first. It gives us what we need to price brickwork and repointing properly, including dimensions, existing materials and access for deliveries, and gives you the chance to ask anything you like.
Your fixed price
The quote arrives in writing, not over the phone. It covers the full scope, the finishes you've chosen, any exclusions and the payment schedule, with a fixed price tied to that specification.
Booking the work
Next comes planning the work itself. We set a start date that suits you, line up the right trades, and make sure any approvals for brickwork and repointing are in place before the first day on site.
Build and hand over
Our trades complete brickwork and repointing while your point of contact keeps you updated. When everything is finished, we clear the site, take away waste and go through the result with you before handover.
Why homeowners choose us
Brickwork and repointing in Burntwood: questions
Will repointing cure damp?
Repointing can stop damp caused by rain getting through failed mortar joints, which is common on exposed walls. It will not fix damp from leaking gutters, a bridged damp-proof course, condensation or high ground levels against the wall. We look for the cause during the survey and recommend fixing that, so repointing is not done for the wrong reason.
Is repointing messy or noisy?
Raking out old mortar is noisy and dusty, especially when power tools are used on hard mortar. We sheet scaffolding to contain dust, keep windows closed nearby and clear up at the end of each day. The noisy phase moves around the house elevation by elevation. Inside, you may notice some dust on windowsills, so it helps to keep windows shut.
How much will brickwork and repointing cost in Burntwood?
As a guide, expect to pay £2,400–£5,900 including VAT for brickwork and repointing in Burntwood. That range is adjusted for the West Midlands, which runs about 2% below the national guide. Where your project lands depends on size, materials, access and the condition of what is already there. We confirm a fixed price in writing after a free survey of your home.
Can I stay at home during the work?
In most cases, yes. Most people can live at home throughout, and we plan the work to keep disruption down by protecting floors, agreeing working hours and keeping access routes clear. Bigger jobs affecting kitchens, bathrooms or heating may mean a short spell with reduced facilities, and we talk this through with you at the survey.
What causes bricks to crumble?
Bricks usually crumble, or spall, when water gets into them and turns to ice, pushing the face off. This is often caused by hard cement mortar or impermeable paint trapping moisture in soft bricks, or by leaking gutters soaking the wall. Damaged bricks can be cut out and replaced with matching ones, or turned round if the back face is sound. We fix the cause at the same time.
Near Burntwood
Live in Burntwood? Our coverage takes in the WS7 postcode areas and reaches out to Great Wyrley, Lichfield and Cannock, so homes on the outskirts and in the next town along are included.