Dorset · Landscaping & Outdoor Spaces

Driveways in Poole

From the first visit to the final check, a new driveway in Poole is planned and managed for you.

New charcoal and grey block-paved driveway in front of a semi

Free survey in Poole

Tell us about the job and we will be in touch to arrange a visit.

Prefer to talk? Call 0800 088 6341 or start a live chat.

A new driveway is a hard-wearing surface for parking, such as block paving, resin bound gravel, tarmac or gravel, laid on an excavated and compacted sub-base with edging and drainage designed to carry vehicle loads and handle rainwater.

Whatever prompted you to look into a new driveway, whether wear and tear, a growing family or plans to move, we can survey your Poole home and give you a price in writing. Homes in the South West typically come in at £4,100–£9,200, VAT included, for this kind of work. We also cover Bournemouth, Christchurch and New Milton, and the same steps apply wherever you are in Dorset.

Guide price
£4,100–£9,200 inc VAT
Time on site
3–7 days on site
Postcodes
BH14, BH15 and BH17
Planning rules
England
Local area
Dorset
Survey
Free, with a written quote

What should you budget for a new driveway in Poole?

What will a new driveway cost in Poole? Our guide range is £4,100–£9,200 including VAT. That figure is adjusted for the South West, about 2% above the national guide, and is intended for planning a budget. A firm written price for your chosen specification follows a free survey at your home.

Type of jobWhat it usually involvesGuide in Poole
Gravel or tarmacA typical 40–50m² drive in gravel on a grid, or tarmac with block edging.£2,000–£5,100
Block paving or resin boundA typical 40–50m² drive with sub-base, edging and drainage.£4,100–£9,200
Large or premium drivewayLarger drives, natural stone, walls, steps or a new dropped kerb.£8,200–£16,500

The main things that change the figure:

  • Driveway area and the depth of excavation needed
  • Surface: gravel, tarmac, block paving, resin or stone
  • Drainage, soakaways and changes in level
  • Edging, steps, walls and manhole adjustments

What do you get?

  • Excavation and removal of the old surface and soil
  • Weed membrane and compacted MOT Type 1 sub-base
  • Drainage channels or soakaway where needed
  • Manhole covers raised or replaced to new levels
  • New surface laid, compacted and finished
  • Site cleared and waste removed
Block pavingConcrete or clay blocks in patterns and colours, permeable versions available.
Resin bound gravelA smooth, porous gravel finish that lets water drain through and needs little upkeep.
TarmacA practical, lower-cost surface that is quick to lay, with block edging for a neat finish.
GravelThe lowest-cost option, naturally permeable, laid on a stabilising grid to stop it spreading.

Local housing and a new driveway

Dorset's older villages use Purbeck and Portland stone, chalk and flint, and thatch on cob or brick cottages. Bournemouth and Poole have Victorian and Edwardian villas, large interwar suburbs and plenty of bungalows and flats, while Weymouth, Dorchester and Bridport mix Georgian and Victorian streets with newer estates.

Salt spray and south-westerly winds affect coastal homes, so external finishes and fixings need to cope with marine exposure.

For a new driveway in Poole, this means checking things like wall construction, roof structure and existing services before we put a figure on paper.

Do you need permission in Poole?

England, Wales, Scotland and Northern Ireland each handle planning a little differently. Poole comes under England, covered below, and we raise any questions with the council before your quote is finalised.

In England, a new or replacement front-garden surface over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your property. A new dropped kerb needs consent from the council’s highways team, and access onto a classified road may need planning permission.

Building Regulations do not usually apply to driveways, but drainage must not discharge onto the road or a neighbour’s land.

Rules change and every property is different, so we check the planning history and constraints for your address before we quote.

How does the job run?

  1. Survey and measure

    It starts with a survey at the property, free of charge. We check condition, access and services, ask how you want the finished result to look, and answer any questions you have about a new driveway.

  2. Price and scope agreed

    You get the price in writing, itemised so you can see where the money goes. As long as the specification stays the same, that is the price you pay for a new driveway.

  3. Getting ready

    Before anyone starts, we confirm the programme in writing, check whether consents are required and arrange deliveries. If a skip or scaffolding on the road needs a permit, we apply for it.

  4. The work itself

    On site, the agreed plan is followed and any change is put in writing first. At completion we do a final clean, go through the snagging list with you and leave you with the relevant documents.

How we work

Tidy, protected work areasFloors, furniture and access routes are covered and protected while we work, and the site is tidied at the end of every working day.
Coverage across the UKWe take on projects in England, Wales, Scotland and Northern Ireland, and plan each one under the rules for the nation it is in.
Plain-English adviceWe explain options, materials and trade-offs without jargon, so you can make decisions about your home with a clear picture of what each choice means.
Realistic timetablesWe give you an honest estimate of time on site at the quote stage and keep you informed if anything affects the programme once work starts.

Questions about a new driveway in Poole

Which driveway surface is easiest to maintain?

Resin bound gravel is one of the easiest surfaces to maintain, because it is smooth, porous and resists weeds, needing only an occasional sweep and wash. Block paving needs re-sanding joints and occasional weed control. Tarmac needs little upkeep but can soften in heat. Gravel needs raking and topping up. We explain the upkeep of each surface before you choose.

How much does a new driveway cost?

A typical 40–50m² block paved or resin bound driveway costs £4,100–£9,200, including excavation, sub-base, edging and drainage. As a guide, allow roughly £70–£150 per square metre plus fixed costs for machinery and waste. Gravel and tarmac cost less, while natural stone, steps and walls cost more. A new dropped kerb is a separate cost. We confirm a fixed price after measuring.

How long will a new driveway take?

On a typical home, allow 3–7 days on site. Larger projects, older buildings and extra work found once things are opened up can extend that, while simpler jobs may be shorter. Your quote includes an estimate of time on site, and your point of contact keeps you updated on the programme as the work progresses.

Can I use my car during the work?

You will not be able to park on the driveway while it is being dug out and laid, so plan to park on the street or nearby for the duration. We keep a safe pedestrian route to your front door where possible. After completion, block paving and tarmac can usually be driven on straight away, while resin and concrete need a short curing period first.

Is the price fixed?

Yes, for the specification we agree. Your written quote sets out exactly what is included at a fixed price. It only changes if you ask for something different, or if a problem the survey could not reasonably reveal later needs extra work. In either case we explain the change and confirm it in writing before going ahead.

Nearby towns

Live in Poole? Our coverage takes in the BH14, BH15 and BH17 postcode areas and reaches out to Bournemouth, Christchurch and New Milton, so homes on the outskirts and in the next town along are included.

Ready for a written price?

Ready to talk about a new driveway in Poole? Book a free site survey and we'll send you a written, fixed-price quote for the specification you choose.

Call freeFree quote