A flat roof replacement strips the old covering from a low-pitched roof and lays a new waterproof system, usually EPDM rubber, GRP fibreglass or torch-on felt, over a sound deck with correct falls, upstands, trims and outlets so rainwater drains away.
For a homeowner in Ramsgate, planning a new flat roof tends to begin with two questions: what will it cost, and how disruptive will it be? Our guide range is £2,200–£5,000 including VAT, and a typical job runs to 1–3 days for most roofs. Both numbers firm up once we have seen the property, measured up and agreed exactly what is included.
- Guide price
- £2,200–£5,000 inc VAT
- Time on site
- 1–3 days for most roofs
- Postcodes
- CT10, CT11 and CT12
- Planning rules
- England
- Local area
- Kent
- Survey
- Free, with a written quote
How much does a new flat roof cost in Ramsgate?
Every figure below is a guide for a new flat roof in Ramsgate, inclusive of VAT. Regional pricing for the South East works out about 12% above the national guide, and the overall span is £2,200–£5,000. The survey costs you nothing, and after it we commit to a firm price for your specification in writing.
| Type of job | What it usually involves | Guide in Ramsgate |
|---|---|---|
| Small roof (up to 8m²) | A dormer, bay, porch or small garage roof re-covered in EPDM or GRP. | £900–£2,200 |
| Extension or garage (15–25m²) | A typical extension or single garage roof stripped and re-covered. | £2,200–£5,000 |
| Large or new warm roof | Larger roofs, or roofs needing a new deck and insulation build-up. | £4,500–£10,000 |
Your price depends mostly on:
- Roof area and access to the roof
- Covering system: EPDM, GRP or torch-on felt
- Condition of the deck and joists underneath
- Insulation upgrades and changes to roof height at edges
What do you get?
- Stripping and disposal of the old roof covering
- Replacement of rotten or soft deck boards
- Insulation upgrade to a warm roof build-up where agreed
- New EPDM, GRP or torch-on felt membrane laid to falls
- Upstands, flashings and drip edges finished neatly
- New trims, outlets and gutter connections
What are homes like around Ramsgate?
Kent's older buildings include oast houses, weatherboarded cottages, Wealden timber-framed houses and Kentish ragstone walls. Medway towns have long rows of Victorian terraces, Margate and Ramsgate have Regency and Victorian seafronts, and Ashford, Maidstone and Dartford have seen large new estates alongside interwar and post-war housing.
One of England's sunnier, drier counties, but Thanet and the coast are windy, and Weald and London Clay soils can shrink in summer.
These patterns matter for a new flat roof: older walls, roofs and floors in Ramsgate can need different materials or extra preparation compared with newer homes.
Do you need permission in Ramsgate?
Ramsgate is in England, so the planning and building rules set out below are the ones that apply. We confirm the details with the council before we quote.
Re-roofing a house with similar materials does not usually need planning permission in England. Listed buildings and conservation areas may need consent if the covering changes.
Replacing more than a quarter of a roof’s covering counts as renovation under Building Regulations, so the work is notified and the roof insulation may need upgrading. Bats are protected across the UK; if they roost under roof tiles, soffits or fascias, work stops and a licensed ecologist advises before it restarts.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
The four stages
Survey and measure
A free survey comes first. It gives us what we need to price a new flat roof properly, including dimensions, existing materials and access for deliveries, and gives you the chance to ask anything you like.
Quote in writing
You get the price in writing, itemised so you can see where the money goes. As long as the specification stays the same, that is the price you pay for a new flat roof.
Plan and prepare
We handle the paperwork side: checking whether planning permission or building control approval is needed, submitting applications where they are, and scheduling the trades and materials around your dates.
Finish and handover
During the work we protect the areas around it and tidy up at the end of each day. Once complete, we check the finish, remove our materials and hand over paperwork such as building control sign-off where it applies.
What you can expect from us
Frequently asked questions
How long does a flat roof replacement take?
Replacing a typical extension or garage flat roof usually takes one to three days. Stripping and any deck repairs come first, then insulation where agreed, the new membrane and the trims and outlets. GRP needs dry weather and time to cure, and we plan around the forecast. Larger roofs or roofs with many rooflights take longer. We confirm timing with your quote.
Do you cover Broadstairs, Margate and Deal?
Yes. As well as Ramsgate, we cover Broadstairs, Margate and Deal and the rest of Kent. Our coverage is UK-wide, so the process is the same wherever you are: a free site survey, a quote in writing that fixes the price for the agreed scope, and one point of contact while the work is planned and carried out.
Which is better, EPDM rubber or GRP fibreglass?
EPDM rubber and GRP fibreglass are both reliable modern flat roof systems. EPDM is a single flexible sheet with very few joints, which copes well with movement and suits most extensions and garages. GRP is a hard, seamless finish that copes better with foot traffic and complex shapes, but needs dry weather to apply. Felt costs less but usually lasts less long. We recommend a system after seeing your roof.
Is a flat roof suitable for a roof terrace?
A flat roof can only be used as a terrace if it is designed for it, with joists strong enough for people and furniture, a hard-wearing surface, safe edge protection and correct drainage. Using a standard extension roof as a terrace can damage it and may need planning permission and building regulations approval. We can advise on what a conversion would involve.
Do I need planning permission in Ramsgate?
It depends on the work, the size of the project, your property type and whether the building is listed or in a conservation area. Ramsgate is in England, so England's rules apply. Many smaller jobs need no planning application, but some still need building control approval. We check what applies to your address before quoting.
Near Ramsgate
Ramsgate and its CT10, CT11 and CT12 postcodes are part of our coverage. Homeowners in Broadstairs, Margate and Deal can also book a free survey with us and receive a written price for their job.