A replacement front or back door is a new door and frame, usually composite, uPVC or aluminium, made to fit your existing opening and fitted with multi-point locks and weather seals to improve security, warmth and kerb appeal.
In Ramsgate, as anywhere in Kent, the price of a new front or back door is driven mainly by size, materials and access. Across the South East our guide sits at £1,100–£3,900 with VAT, but restricted parking, a narrow side passage or extra preparation can move the figure either way. That is why every price we give follows a visit to the house.
- Guide price
- £1,100–£3,900 inc VAT
- Time on site
- Usually half a day to one day per door
- Postcodes
- CT10, CT11 and CT12
- Planning rules
- England
- Local area
- Kent
- Survey
- Free, with a written quote
What should you budget for a new front or back door in Ramsgate?
Prices for a new front or back door vary from house to house, but in Ramsgate most projects fall within £1,100–£3,900 including VAT. That reflects costs in the South East, about 12% above the national guide. Treat the table as a budgeting aid; the written figure follows a survey we carry out for free.
| Type of job | What it usually involves | Guide in Ramsgate |
|---|---|---|
| uPVC back door | A standard uPVC back or side door with a half-glazed panel and multi-point lock. | £900–£1,700 |
| Composite front door | A made-to-measure composite door in your chosen colour, glass design and hardware. | £1,350–£2,800 |
| Aluminium or door with side panels | A premium aluminium door, or a composite door with one or two side panels. | £2,800–£5,600 |
Your price depends mostly on:
- Door material: uPVC, composite or aluminium
- Side panels, fanlights and the amount of glass
- Colour, including different colours inside and out
- Condition of the opening, threshold and surrounding brickwork
What does the job include in Ramsgate?
- Measured survey of the opening, threshold and frame condition
- Made-to-measure door and frame in your chosen colour and design
- Glazing panels, side panels or fanlights where specified
- Removal and disposal of the old door and frame
- Low threshold options for level or easier access
- Weather seals, sealant and internal trims finished neatly
Local housing and a new front or back door
Kent's older buildings include oast houses, weatherboarded cottages, Wealden timber-framed houses and Kentish ragstone walls. Medway towns have long rows of Victorian terraces, Margate and Ramsgate have Regency and Victorian seafronts, and Ashford, Maidstone and Dartford have seen large new estates alongside interwar and post-war housing.
One of England's sunnier, drier counties, but Thanet and the coast are windy, and Weald and London Clay soils can shrink in summer.
Building traditions across Kent also raise conservation and planning questions, so we check those for a new front or back door in Ramsgate at the survey stage.
Permissions for a new front or back door in Ramsgate
Because Ramsgate falls under England's rules, the guidance below is the version relevant to you. Before sending a price, we check your property's position with the council.
Replacing windows and doors on a house is usually permitted development in England when the new ones look broadly similar to the old. Flats, listed buildings and homes covered by an Article 4 direction can need consent, and conservation areas may limit materials or styles.
Replacement windows and external doors must meet Building Regulations for energy efficiency, ventilation and, on upper floors, escape. The work is either self-certified by an installer registered with a competent person scheme or signed off by building control.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
How does the job run?
Free site survey
First, someone visits your home in Ramsgate to see the space, take measurements and note anything that could affect the work, such as access or the condition of what is there. There is no charge for this visit.
Quote in writing
You get the price in writing, itemised so you can see where the money goes. As long as the specification stays the same, that is the price you pay for a new front or back door.
Plan and prepare
Before anyone starts, we confirm the programme in writing, check whether consents are required and arrange deliveries. If a skip or scaffolding on the road needs a permit, we apply for it.
Finish and handover
During the work we protect the areas around it and tidy up at the end of each day. Once complete, we check the finish, remove our materials and hand over paperwork such as building control sign-off where it applies.
Why homeowners choose us
Frequently asked questions
Do I need permission to change my front door?
Planning permission is not usually needed to replace a front door, but it depends on the style and size of the change, your home's location, whether it is listed or in a conservation area, and which UK nation you are in. Listed homes generally need consent for any change, and some conservation areas control colours and styles. Flat entrance doors in shared buildings must also meet fire rules. We check before quoting.
Do I need planning permission in Ramsgate?
It depends on the work, the size of the project, your property type and whether the building is listed or in a conservation area. Ramsgate is in England, so England's rules apply. Many smaller jobs need no planning application, but some still need building control approval. We check what applies to your address before quoting.
Can you combine a new front or back door with other work?
Yes. Because we manage several trades under one contract, we can plan a new front or back door alongside other work on your Ramsgate home, such as new windows with rendering, or a kitchen refit with an extension. Combining jobs can reduce repeat set-up such as scaffolding, skips and access, and every element is listed and priced in the same written quote.
How secure are modern doors?
Modern external doors are far more secure than older designs because they lock at several points along the frame, not just at the handle. We fit anti-snap cylinders, which resist a common method of forced entry, in reinforced frames. Laminated or toughened glass panels add further protection. For extra peace of mind you can add a door chain, a viewer or a smart lock, which we can include in your quote.
How long does it take to make a new door?
Made-to-measure doors usually take a few weeks to manufacture after the survey and your order are confirmed. Bespoke colours, special glass designs and aluminium doors can take longer. Once the door arrives, we arrange a fitting date that suits you. We give you a realistic lead time with your written quote, and we keep you updated if the manufacturer's dates change.
Nearby towns
Live in Ramsgate? Our coverage takes in the CT10, CT11 and CT12 postcode areas and reaches out to Broadstairs, Margate and Deal, so homes on the outskirts and in the next town along are included.