Kent · Windows & Doors

Front and back doors in Margate

Front and back doors for homes in Margate and nearby Broadstairs, Ramsgate and Deal, from survey to handover.

Grey composite front door with a glazed side panel on a brick house

Free survey in Margate

Tell us about the job and we will be in touch to arrange a visit.

Prefer to talk? Call 0800 088 6341 or start a live chat.

A replacement front or back door is a new door and frame, usually composite, uPVC or aluminium, made to fit your existing opening and fitted with multi-point locks and weather seals to improve security, warmth and kerb appeal.

We arrange a new front or back door for homeowners in Margate and the wider Kent. The job is planned, priced and managed by us and carried out by tradespeople engaged under our contract, so there is one agreement and one contact. On a typical home the work takes Usually half a day to one day per door, and guide pricing in the South East is £1,100–£3,900, VAT included.

Guide price
£1,100–£3,900 inc VAT
Time on site
Usually half a day to one day per door
Postcodes
CT8, CT9 and CT11
Planning rules
England
Local area
Kent
Survey
Free, with a written quote

How much does a new front or back door cost in Margate?

In Margate, guide figures for a new front or back door sit at £1,100–£3,900, VAT included. We set them using rates for the South East, currently about 12% above the national guide. The table shows what pushes a project towards either end of the range; your own price is set after a free survey.

Type of jobWhat it usually involvesGuide in Margate
uPVC back doorA standard uPVC back or side door with a half-glazed panel and multi-point lock.£900–£1,700
Composite front doorA made-to-measure composite door in your chosen colour, glass design and hardware.£1,350–£2,800
Aluminium or door with side panelsA premium aluminium door, or a composite door with one or two side panels.£2,800–£5,600

Your price depends mostly on:

  • Door material: uPVC, composite or aluminium
  • Lock, cylinder and hardware specification
  • Colour, including different colours inside and out
  • Condition of the opening, threshold and surrounding brickwork

What do you get?

  • Measured survey of the opening, threshold and frame condition
  • Made-to-measure door and frame in your chosen colour and design
  • Glazing panels, side panels or fanlights where specified
  • Removal and disposal of the old door and frame
  • Low threshold options for level or easier access
  • Weather seals, sealant and internal trims finished neatly
uPVC doorA lower-cost choice that suits back and side doors, with multi-point locks and easy cleaning.
Aluminium doorSlim, very strong frames and contemporary styles, with flush panels and long bar handles.
Stable doorSplit horizontally so the top opens on its own, popular for kitchens and back doors.
Door with side panelsGlazed or solid side panels, or a fanlight, that bring extra light into a hallway.

Homes in Kent

Kent's older buildings include oast houses, weatherboarded cottages, Wealden timber-framed houses and Kentish ragstone walls. Medway towns have long rows of Victorian terraces, Margate and Ramsgate have Regency and Victorian seafronts, and Ashford, Maidstone and Dartford have seen large new estates alongside interwar and post-war housing.

Victorian terraces suit loft rooms and rear extensions; weatherboarded and timber-framed buildings may need cladding repairs and lime work. Newer estate homes often take garage conversions, porches and landscaping.

These patterns matter for a new front or back door: older walls, roofs and floors in Margate can need different materials or extra preparation compared with newer homes.

Permissions for a new front or back door in Margate

Which rules apply depends on where you live. For Margate, the answer is England, and the points below reflect that; we verify them with the council before quoting.

Replacing windows and doors on a house is usually permitted development in England when the new ones look broadly similar to the old. Flats, listed buildings and homes covered by an Article 4 direction can need consent, and conservation areas may limit materials or styles.

Replacement windows and external doors must meet Building Regulations for energy efficiency, ventilation and, on upper floors, escape. The work is either self-certified by an installer registered with a competent person scheme or signed off by building control.

Rules change and every property is different, so we check the planning history and constraints for your address before we quote.

How does the job run?

  1. Survey and measure

    A free survey comes first. It gives us what we need to price a new front or back door properly, including dimensions, existing materials and access for deliveries, and gives you the chance to ask anything you like.

  2. Quote in writing

    The quote arrives in writing, not over the phone. It covers the full scope, the finishes you've chosen, any exclusions and the payment schedule, with a fixed price tied to that specification.

  3. Dates and permissions

    Once you accept, we agree start dates, order materials and deal with any planning, building control or neighbour notices the job needs. You'll know who is coming and when before work begins.

  4. Finish and handover

    Work goes ahead as scheduled and you deal with one contact throughout. When the last trade leaves, we clear and clean the site, talk you through what has been done and pass on any certificates and care instructions.

What you can expect from us

Tidy, protected work areasFloors, furniture and access routes are covered and protected while we work, and the site is tidied at the end of every working day.
Certified where requiredElectrical, gas and other notifiable work is carried out by suitably registered people, and you receive the relevant certificates when it is finished.
Realistic timetablesWe give you an honest estimate of time on site at the quote stage and keep you informed if anything affects the programme once work starts.
A proper handoverAt the end we clear the site, show you round the finished work and pass on documents like a building control completion certificate.

Front and back doors in Margate: questions

What is the difference between a composite and a uPVC door?

A composite door has a tough outer skin over a solid insulated core, so it feels heavier and more solid than uPVC and holds its colour well. A uPVC door is built from reinforced plastic panels and costs less. Both can have multi-point locking and good weather seals. Many people choose composite for the front door and uPVC for back or side doors, where looks matter less.

How long will a new front or back door take?

On a typical home, allow Usually half a day to one day per door. Larger projects, older buildings and extra work found once things are opened up can extend that, while simpler jobs may be shorter. Your quote includes an estimate of time on site, and your point of contact keeps you updated on the programme as the work progresses.

Do I need permission to change my front door?

Planning permission is not usually needed to replace a front door, but it depends on the style and size of the change, your home's location, whether it is listed or in a conservation area, and which UK nation you are in. Listed homes generally need consent for any change, and some conservation areas control colours and styles. Flat entrance doors in shared buildings must also meet fire rules. We check before quoting.

How long will my home be open while the door is fitted?

Fitting a new door usually takes half a day to a full day, and your home is only open for the short time between taking out the old frame and fixing the new one. We keep the opening covered if there is any delay, and we never leave a doorway insecure overnight. Once the frame is fixed, we hang the door, adjust the locks, seal around the frame and finish the trims.

How much will a new front or back door cost in Margate?

As a guide, expect to pay £1,100–£3,900 including VAT for a new front or back door in Margate. That range is adjusted for the South East, which runs about 12% above the national guide. Where your project lands depends on size, materials, access and the condition of what is already there. We confirm a fixed price in writing after a free survey of your home.

Near Margate

If your address falls within CT8, CT9 and CT11, we cover it. The same goes for neighbouring Broadstairs, Ramsgate and Deal, which we include alongside Margate when arranging surveys and quotes.

Planning a new front or back door in Margate?

Tell us a little about your home in Margate and what you have in mind for a new front or back door. We'll arrange a site survey, free of charge, and put our price in writing.

Call freeFree quote