A flat roof replacement strips the old covering from a low-pitched roof and lays a new waterproof system, usually EPDM rubber, GRP fibreglass or torch-on felt, over a sound deck with correct falls, upstands, trims and outlets so rainwater drains away.
We take on a new flat roof throughout Hayes and the surrounding UB1, UB2, UB3 and UB4 postcodes, as well as in Southall, Heston and Greenford. The guide range for this work in London is £2,600–£5,800 including VAT; where your project falls depends on its size, the materials you pick and how easy the site is to reach. A free survey turns that range into a fixed figure.
- Guide price
- £2,600–£5,800 inc VAT
- Time on site
- 1–3 days for most roofs
- Postcodes
- UB1, UB2, UB3, UB4 and UB7
- Planning rules
- England
- Local area
- Greater London
- Survey
- Free, with a written quote
Flat roofs prices in Hayes
Budgeting for a new flat roof in Hayes? The numbers below include VAT and are adjusted for London, where costs are about 30% above the national guide. The headline range is £2,600–£5,800. Nothing is final until we have measured up at a free survey and agreed the specification with you.
| Type of job | What it usually involves | Guide in Hayes |
|---|---|---|
| Small roof (up to 8m²) | A dormer, bay, porch or small garage roof re-covered in EPDM or GRP. | £1,050–£2,600 |
| Extension or garage (15–25m²) | A typical extension or single garage roof stripped and re-covered. | £2,600–£5,800 |
| Large or new warm roof | Larger roofs, or roofs needing a new deck and insulation build-up. | £5,200–£11,500 |
Expect these to shape the final quote:
- Roof area and access to the roof
- Condition of the deck and joists underneath
- Insulation upgrades and changes to roof height at edges
- Number of rooflights, pipes and upstands to detail
What’s included?
- Survey of the covering, deck, falls, upstands and drainage
- Stripping and disposal of the old roof covering
- Replacement of rotten or soft deck boards
- Insulation upgrade to a warm roof build-up where agreed
- New EPDM, GRP or torch-on felt membrane laid to falls
- Rooflights refitted or replaced where required
Local housing and a new flat roof
London's housing is dominated by Victorian and Edwardian terraces, often in yellow London stock brick, with Georgian terraces in central districts and mansion blocks across many inner areas. Outer boroughs have large belts of interwar semis, and there are extensive post-war council estates. Many houses have been split into flats, and conservation areas are widespread.
Terraces suit side-return extensions and rear dormer loft conversions; interwar semis commonly take hip-to-gable lofts. Shared party walls, restricted parking and conservation rules often shape the plans and the programme.
None of this holds for every street in Hayes, which is why we look at your actual house before pricing a new flat roof rather than assuming from its age alone.
Do you need permission in Hayes?
Because Hayes falls under England's rules, the guidance below is the version relevant to you. Before sending a price, we check your property's position with the council.
Re-roofing a house with similar materials does not usually need planning permission in England. Listed buildings and conservation areas may need consent if the covering changes.
Replacing more than a quarter of a roof’s covering counts as renovation under Building Regulations, so the work is notified and the roof insulation may need upgrading. Bats are protected across the UK; if they roost under roof tiles, soffits or fascias, work stops and a licensed ecologist advises before it restarts.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
How does the job run?
Survey and measure
It starts with a survey at the property, free of charge. We check condition, access and services, ask how you want the finished result to look, and answer any questions you have about a new flat roof.
Price and scope agreed
You get the price in writing, itemised so you can see where the money goes. As long as the specification stays the same, that is the price you pay for a new flat roof.
Dates and permissions
With the quote agreed, we book the work in and handle preparation: permissions where needed, building control notifications, material orders and access arrangements for your Hayes property.
On site to finish
During the work we protect the areas around it and tidy up at the end of each day. Once complete, we check the finish, remove our materials and hand over paperwork such as building control sign-off where it applies.
Why homeowners choose us
Frequently asked questions
Can I stay at home during the work?
In most cases, yes. Most people can live at home throughout, and we plan the work to keep disruption down by protecting floors, agreeing working hours and keeping access routes clear. Bigger jobs affecting kitchens, bathrooms or heating may mean a short spell with reduced facilities, and we talk this through with you at the survey.
Which is better, EPDM rubber or GRP fibreglass?
EPDM rubber and GRP fibreglass are both reliable modern flat roof systems. EPDM is a single flexible sheet with very few joints, which copes well with movement and suits most extensions and garages. GRP is a hard, seamless finish that copes better with foot traffic and complex shapes, but needs dry weather to apply. Felt costs less but usually lasts less long. We recommend a system after seeing your roof.
How long does a flat roof replacement take?
Replacing a typical extension or garage flat roof usually takes one to three days. Stripping and any deck repairs come first, then insulation where agreed, the new membrane and the trims and outlets. GRP needs dry weather and time to cure, and we plan around the forecast. Larger roofs or roofs with many rooflights take longer. We confirm timing with your quote.
How long does a flat roof last?
A well-installed EPDM or GRP flat roof can last 25 years or more, while torch-on felt systems typically last around 15–25 years, depending on quality and exposure. Lifespan depends on correct falls, good detailing at edges and upstands, and keeping outlets clear. Foot traffic, ponding and poor ventilation shorten it. Annual checks help catch small problems early.
Do I need planning permission in Hayes?
It depends on the work, the size of the project, your property type and whether the building is listed or in a conservation area. Hayes is in England, so England's rules apply. Many smaller jobs need no planning application, but some still need building control approval. We check what applies to your address before quoting.
Nearby towns
From UB1, UB2, UB3 and UB4 to the edges of Hayes and on into Southall, Heston and Greenford, we can arrange a site visit and a written quote for your project, planned around dates that work for you.