A flat roof replacement strips the old covering from a low-pitched roof and lays a new waterproof system, usually EPDM rubber, GRP fibreglass or torch-on felt, over a sound deck with correct falls, upstands, trims and outlets so rainwater drains away.
From Oxford, Banbury, Abingdon and Bicester to the quieter corners of Oxfordshire, homeowners can book a free survey for a new flat roof. We look at the building, agree the scope, then send a quote in writing that fixes the cost of that scope. Work follows the rules for England, and our published range for the South East, £2,200–£5,000 with VAT, gives you a sense of budget before we visit.
- Guide price
- £2,200–£5,000 inc VAT
- Time on site
- 1–3 days for most roofs
- Planning rules
- England
- Price level
- About 12% above the national guide
- Towns listed
- 6
- Survey
- Free, with a written quote
How much does a new flat roof cost in Oxfordshire?
No two jobs cost exactly the same, but the ranges below give a fair picture of a new flat roof in Oxfordshire. Pricing for the South East runs about 12% above the national guide, and the overall guide is £2,200–£5,000 with VAT included. We'll confirm your figure after surveying the property for free.
| Type of job | What it usually involves | Guide in Oxfordshire |
|---|---|---|
| Small roof (up to 8m²) | A dormer, bay, porch or small garage roof re-covered in EPDM or GRP. | £900–£2,200 |
| Extension or garage (15–25m²) | A typical extension or single garage roof stripped and re-covered. | £2,200–£5,000 |
| Large or new warm roof | Larger roofs, or roofs needing a new deck and insulation build-up. | £4,500–£10,000 |
Your price depends mostly on:
- Roof area and access to the roof
- Covering system: EPDM, GRP or torch-on felt
- Condition of the deck and joists underneath
- Number of rooflights, pipes and upstands to detail
Scope of the work
- Survey of the covering, deck, falls, upstands and drainage
- Stripping and disposal of the old roof covering
- Insulation upgrade to a warm roof build-up where agreed
- New EPDM, GRP or torch-on felt membrane laid to falls
- New trims, outlets and gutter connections
- Rooflights refitted or replaced where required
Homes in Oxfordshire
West Oxfordshire's Cotswold villages are built of honey-coloured limestone, while Banbury and the north use orange ironstone. Oxford has Victorian terraces in Jericho and East Oxford and Gothic brick villas in North Oxford. Didcot, Bicester and Witney have grown with large new estates around older market-town centres.
Stone cottages often need lime pointing and conservation-sensitive windows. Victorian terraces suit loft conversions and side-return extensions, and newer estate homes commonly take garage conversions and garden landscaping.
Low ground around Oxford and Abingdon floods from the Thames and its tributaries; the Cotswold uplands are more exposed to wind and frost.
Do you need permission in Oxfordshire?
Because Oxfordshire falls under England's rules, the guidance below is the version relevant to you. Before sending a price, we check your property's position with the council.
Re-roofing a house with similar materials does not usually need planning permission in England. Listed buildings and conservation areas may need consent if the covering changes.
Replacing more than a quarter of a roof’s covering counts as renovation under Building Regulations, so the work is notified and the roof insulation may need upgrading. Bats are protected across the UK; if they roost under roof tiles, soffits or fascias, work stops and a licensed ecologist advises before it restarts.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
The four stages
Free site survey
It starts with a survey at the property, free of charge. We check condition, access and services, ask how you want the finished result to look, and answer any questions you have about a new flat roof.
Your fixed price
After the survey we send a quote for a new flat roof that fixes the price for the scope we've agreed. If you want to change materials or scope, we revise it in writing before anything is booked.
Getting ready
We handle the paperwork side: checking whether planning permission or building control approval is needed, submitting applications where they are, and scheduling the trades and materials around your dates.
Finish and handover
The work is carried out to the agreed specification, with floors and furniture protected and the site kept tidy. At the end we clean up, walk through the finished job with you and hand over any certificates.
What you can expect from us
Frequently asked questions
Can you combine a new flat roof with other work?
Yes. Because we manage several trades under one contract, we can plan a new flat roof alongside other work on your Oxfordshire home, such as new windows with rendering, or a kitchen refit with an extension. Combining jobs can reduce repeat set-up such as scaffolding, skips and access, and every element is listed and priced in the same written quote.
Who do I deal with during the job?
One point of contact manages your project from survey to handover. They schedule the trades working under our contract, keep you updated on progress, and are the person to call with any question. You don't need to coordinate builders, electricians or decorators separately, because that is part of what we do.
How much does a new flat roof cost?
Re-covering a typical 15–25m² extension or garage roof costs £2,200–£5,000. As a guide, allow around £75–£170 per square metre plus fixed costs for stripping, waste and access, with torch-on felt at the lower end and GRP or EPDM with new decking or insulation at the top. Small dormer and porch roofs cost less overall but more per square metre. We confirm a fixed price after the survey.
Is a flat roof suitable for a roof terrace?
A flat roof can only be used as a terrace if it is designed for it, with joists strong enough for people and furniture, a hard-wearing surface, safe edge protection and correct drainage. Using a standard extension roof as a terrace can damage it and may need planning permission and building regulations approval. We can advise on what a conversion would involve.
Which is better, EPDM rubber or GRP fibreglass?
EPDM rubber and GRP fibreglass are both reliable modern flat roof systems. EPDM is a single flexible sheet with very few joints, which copes well with movement and suits most extensions and garages. GRP is a hard, seamless finish that copes better with foot traffic and complex shapes, but needs dry weather to apply. Felt costs less but usually lasts less long. We recommend a system after seeing your roof.
Towns in Oxfordshire
Our coverage for a new flat roof in Oxfordshire includes the towns listed here. Each page explains guide costs, typical timings and the neighbouring places we also serve.