West Glamorgan · Roofing & Cladding

Flat roofs in Swansea

From the first visit to the final check, a new flat roof in Swansea is planned and managed for you.

New black rubber flat roof on a single-storey extension

Free survey in Swansea

Tell us about the job and we will be in touch to arrange a visit.

Prefer to talk? Call 0800 088 6341 or start a live chat.

A flat roof replacement strips the old covering from a low-pitched roof and lays a new waterproof system, usually EPDM rubber, GRP fibreglass or torch-on felt, over a sound deck with correct falls, upstands, trims and outlets so rainwater drains away.

Swansea sits within our coverage for a new flat roof, as do neighbouring Clydach, Briton Ferry and Gorseinon. Before giving a price we want to see the property: the condition of what's there now, the access, and anything that might need extra work. The guide range for Wales is £1,850–£4,100 including VAT, and your written quote will spell out exactly what that covers.

Guide price
£1,850–£4,100 inc VAT
Time on site
1–3 days for most roofs
Postcodes
SA1, SA2 and SA5
Planning rules
Wales
Local area
West Glamorgan
Survey
Free, with a written quote

How much does a new flat roof cost in Swansea?

What should you budget for a new flat roof in Swansea? Use the figures below as a starting point. Prices in Wales sit about 8% below the national guide, so the range here is £1,850–£4,100 including VAT. Your fixed price comes in writing once we've surveyed the property, at no charge.

Type of jobWhat it usually involvesGuide in Swansea
Small roof (up to 8m²)A dormer, bay, porch or small garage roof re-covered in EPDM or GRP.£750–£1,850
Extension or garage (15–25m²)A typical extension or single garage roof stripped and re-covered.£1,850–£4,100
Large or new warm roofLarger roofs, or roofs needing a new deck and insulation build-up.£3,700–£8,300

Your price depends mostly on:

  • Roof area and access to the roof
  • Covering system: EPDM, GRP or torch-on felt
  • Condition of the deck and joists underneath
  • Insulation upgrades and changes to roof height at edges

What’s included?

  • Survey of the covering, deck, falls, upstands and drainage
  • Replacement of rotten or soft deck boards
  • Insulation upgrade to a warm roof build-up where agreed
  • New EPDM, GRP or torch-on felt membrane laid to falls
  • New trims, outlets and gutter connections
  • Rooflights refitted or replaced where required
EPDM rubberA single-sheet rubber membrane with few joints, flexible and long-lasting.
GRP fibreglassA seamless, hard-wearing finish that suits roofs used for occasional foot traffic.
Torch-on feltA multi-layer bitumen system, the lowest-cost option with a mineral or plain finish.
Warm roof upgradeInsulation boards laid above the deck to reduce heat loss and condensation.

What are homes like around Swansea?

Swansea's Victorian terraces climb its hillsides, its centre was largely rebuilt after wartime bombing, and Neath and Port Talbot have industrial terraces and post-war estates. Gower villages have stone cottages, and Pennant sandstone is common in older walls. Newer estates have grown on the edges of the main towns.

Hillside terraces often need repointing, rendering, roof repairs and window replacement, and loft conversions can work well. Gower stone cottages call for lime-based repairs, and estate homes commonly take extensions and driveways.

For a new flat roof in Swansea, this means checking things like wall construction, roof structure and existing services before we put a figure on paper.

Do you need permission in Swansea?

The notes below cover Wales, which is where Swansea sits. Rules change and every property is different, so we speak to the council before pricing your job.

Re-roofing with similar materials does not usually need planning permission in Wales, except on listed buildings or where a conservation area restricts materials.

Building Regulations in Wales apply to major re-roofing, including insulation upgrades. Bats are protected across the UK; if they roost under roof tiles, soffits or fascias, work stops and a licensed ecologist advises before it restarts.

Rules change and every property is different, so we check the planning history and constraints for your address before we quote.

How does the job run?

  1. Survey and measure

    Book a visit and we'll come to you. The survey covers measurements, the state of what's there now and any obvious constraints, so the price that follows is based on your actual home, not an average.

  2. Written quote

    The quote arrives in writing, not over the phone. It covers the full scope, the finishes you've chosen, any exclusions and the payment schedule, with a fixed price tied to that specification.

  3. Plan and prepare

    Once you accept, we agree start dates, order materials and deal with any planning, building control or neighbour notices the job needs. You'll know who is coming and when before work begins.

  4. On site to finish

    Work goes ahead as scheduled and you deal with one contact throughout. When the last trade leaves, we clear and clean the site, talk you through what has been done and pass on any certificates and care instructions.

What you can expect from us

Guide prices shown upfrontYou can see typical price ranges, including VAT, before you contact us, so you can judge whether a project fits your budget.
Permissions checked firstWe check whether planning permission or building control approval is needed for your property, and handle applications and notices where they apply.
Changes agreed in writingIf something needs to change once work is under way, we explain why and confirm the cost or saving in writing before carrying on.
Coverage across the UKWe take on projects in England, Wales, Scotland and Northern Ireland, and plan each one under the rules for the nation it is in.

Questions about a new flat roof in Swansea

What happens at the survey?

We visit your home at a time that suits you, look at the area involved, take measurements and check access, condition and any services that might be affected. We talk through what you want from a new flat roof, explain the options and answer questions. There is no charge and no obligation; afterwards we send a written quote.

How long does a flat roof replacement take?

Replacing a typical extension or garage flat roof usually takes one to three days. Stripping and any deck repairs come first, then insulation where agreed, the new membrane and the trims and outlets. GRP needs dry weather and time to cure, and we plan around the forecast. Larger roofs or roofs with many rooflights take longer. We confirm timing with your quote.

Can you repair my flat roof instead of replacing it?

A flat roof can often be repaired if the damage is limited to a small split, a failed joint or a loose upstand and the rest of the covering is sound. If the deck is soft, the covering is blistered or cracked across the roof, or leaks keep returning, replacement is usually better value. We assess the whole roof and give you an honest recommendation.

Who do I deal with during the job?

One point of contact manages your project from survey to handover. They schedule the trades working under our contract, keep you updated on progress, and are the person to call with any question. You don't need to coordinate builders, electricians or decorators separately, because that is part of what we do.

Which is better, EPDM rubber or GRP fibreglass?

EPDM rubber and GRP fibreglass are both reliable modern flat roof systems. EPDM is a single flexible sheet with very few joints, which copes well with movement and suits most extensions and garages. GRP is a hard, seamless finish that copes better with foot traffic and complex shapes, but needs dry weather to apply. Felt costs less but usually lasts less long. We recommend a system after seeing your roof.

Nearby towns

We welcome enquiries from all SA1, SA2 and SA5 postcodes in Swansea, plus Clydach, Briton Ferry and Gorseinon. Each one gets the same survey at no charge and a written price fixed for the work described.

Ready for a written price?

Considering a new flat roof? Homeowners in Swansea can request a survey and a fixed-price quote at no cost, or use the online guide-price tool to set a budget first.

Call freeFree quote