A replacement front or back door is a new door and frame, usually composite, uPVC or aluminium, made to fit your existing opening and fitted with multi-point locks and weather seals to improve security, warmth and kerb appeal.
Thinking about a new front or back door in Banbridge? We take charge of the whole project, co-ordinating every trade involved, and one person keeps you updated. Guide prices for Northern Ireland sit at £850–£3,000 including VAT, and a typical job takes Usually half a day to one day per door. Your own figure depends on what the survey finds and the specification you settle on.
- Guide price
- £850–£3,000 inc VAT
- Time on site
- Usually half a day to one day per door
- Postcodes
- BT32
- Planning rules
- Northern Ireland
- Local area
- County Down
- Survey
- Free, with a written quote
How much does a new front or back door cost in Banbridge?
In Banbridge, guide figures for a new front or back door sit at £850–£3,000, VAT included. We set them using rates for Northern Ireland, currently about 14% below the national guide. The table shows what pushes a project towards either end of the range; your own price is set after a free survey.
| Type of job | What it usually involves | Guide in Banbridge |
|---|---|---|
| uPVC back door | A standard uPVC back or side door with a half-glazed panel and multi-point lock. | £700–£1,300 |
| Composite front door | A made-to-measure composite door in your chosen colour, glass design and hardware. | £1,050–£2,200 |
| Aluminium or door with side panels | A premium aluminium door, or a composite door with one or two side panels. | £2,200–£4,300 |
What moves the price up or down:
- Side panels, fanlights and the amount of glass
- Lock, cylinder and hardware specification
- Colour, including different colours inside and out
- Condition of the opening, threshold and surrounding brickwork
What do you get?
- Measured survey of the opening, threshold and frame condition
- Multi-point locking with anti-snap cylinders and matching handles
- Glazing panels, side panels or fanlights where specified
- Removal and disposal of the old door and frame
- Weather seals, sealant and internal trims finished neatly
- Building regulations paperwork where a glazed door needs it
Local housing and a new front or back door
County Down takes in suburbs of Belfast, Bangor and Holywood with Victorian and Edwardian villas, and Newry, Downpatrick and Banbridge with older town centres and newer estates. Mourne granite appears in buildings around the mountains, and detached rural homes and bungalows are common across the county, often rendered or pebbledashed.
Villas and semis suit kitchen extensions, loft conversions and garden landscaping. Rural detached homes commonly take extensions and driveways, and rendered houses often need re-rendering, roofline renewal and window replacement.
That variety is why a guide price for a new front or back door in Banbridge is only a starting point; the survey shows what your particular property needs.
Do you need permission in Banbridge?
Banbridge is in Northern Ireland, so the planning and building rules set out below are the ones that apply. We confirm the details with the council before we quote.
In Northern Ireland, like-for-like replacement windows and doors on a house rarely need planning permission. Listed buildings and conservation areas are the main exceptions, so check with the council before changing style or material.
The Building Regulations (Northern Ireland) apply to replacement windows, so the work needs building control approval or sign-off through an approved competent person route.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
The four stages
A visit to your home
We begin by looking at the job in person. During the free survey we discuss options, materials and budget for a new front or back door, and photograph or measure anything the quote needs to reflect.
Your fixed price
Next you receive a written quote with a fixed price for the agreed specification. It lists what is included, what is not, and how payments are staged, so you can compare it properly.
Getting ready
Before anyone starts, we confirm the programme in writing, check whether consents are required and arrange deliveries. If a skip or scaffolding on the road needs a permit, we apply for it.
The work itself
Work goes ahead as scheduled and you deal with one contact throughout. When the last trade leaves, we clear and clean the site, talk you through what has been done and pass on any certificates and care instructions.
What you can expect from us
Common questions
How much does a new front door cost?
A new front door costs £850–£3,000 supplied and fitted, depending on the material, the amount of glass and whether you want side panels. A uPVC back door sits at the lower end, a composite front door in the middle, and aluminium doors or doors with side panels at the top. Locks, letterplates and dual colours also affect the figure. We confirm a fixed price in writing after measuring your opening.
How do I look after a composite or uPVC door?
Looking after a composite or uPVC door is mostly a matter of regular cleaning with warm soapy water and a soft cloth. Avoid solvents and abrasive pads, which can dull the finish. Once or twice a year, lightly oil the lock mechanism and the moving parts along the edge of the door, and check the seals. If the door starts to catch, the hinges can usually be adjusted easily.
Do I need permission to change my front door?
Planning permission is not usually needed to replace a front door, but it depends on the style and size of the change, your home's location, whether it is listed or in a conservation area, and which UK nation you are in. Listed homes generally need consent for any change, and some conservation areas control colours and styles. Flat entrance doors in shared buildings must also meet fire rules. We check before quoting.
Can you combine a new front or back door with other work?
Yes. Because we manage several trades under one contract, we can plan a new front or back door alongside other work on your Banbridge home, such as new windows with rendering, or a kitchen refit with an extension. Combining jobs can reduce repeat set-up such as scaffolding, skips and access, and every element is listed and priced in the same written quote.
Do I need planning permission in Banbridge?
It depends on the work, the size of the project, your property type and whether the building is listed or in a conservation area. Banbridge is in Northern Ireland, so Northern Ireland's rules apply. Many smaller jobs need no planning application, but some still need building control approval. We check what applies to your address before quoting.
Near Banbridge
Banbridge and its BT32 postcodes are part of our coverage. Homeowners in Craigavon, Portadown and Newry can also book a free survey with us and receive a written price for their job.