A replacement front or back door is a new door and frame, usually composite, uPVC or aluminium, made to fit your existing opening and fitted with multi-point locks and weather seals to improve security, warmth and kerb appeal.
In Alfreton, as anywhere in Derbyshire, the price of a new front or back door is driven mainly by size, materials and access. Across the East Midlands our guide sits at £950–£3,400 with VAT, but restricted parking, a narrow side passage or extra preparation can move the figure either way. That is why every price we give follows a visit to the house.
- Guide price
- £950–£3,400 inc VAT
- Time on site
- Usually half a day to one day per door
- Postcodes
- DE55
- Planning rules
- England
- Local area
- Derbyshire
- Survey
- Free, with a written quote
What should you budget for a new front or back door in Alfreton?
In Alfreton, guide figures for a new front or back door sit at £950–£3,400, VAT included. We set them using rates for the East Midlands, currently about 4% below the national guide. The table shows what pushes a project towards either end of the range; your own price is set after a free survey.
| Type of job | What it usually involves | Guide in Alfreton |
|---|---|---|
| uPVC back door | A standard uPVC back or side door with a half-glazed panel and multi-point lock. | £750–£1,450 |
| Composite front door | A made-to-measure composite door in your chosen colour, glass design and hardware. | £1,150–£2,400 |
| Aluminium or door with side panels | A premium aluminium door, or a composite door with one or two side panels. | £2,400–£4,800 |
Your price depends mostly on:
- Door material: uPVC, composite or aluminium
- Side panels, fanlights and the amount of glass
- Colour, including different colours inside and out
- Condition of the opening, threshold and surrounding brickwork
What’s included?
- Made-to-measure door and frame in your chosen colour and design
- Glazing panels, side panels or fanlights where specified
- Removal and disposal of the old door and frame
- Low threshold options for level or easier access
- Weather seals, sealant and internal trims finished neatly
- Building regulations paperwork where a glazed door needs it
Building in Alfreton
Derby has wide areas of Victorian red-brick terraces and interwar semis, while Peak District villages use gritstone and limestone under stone-slate or Welsh slate roofs. Former mining towns in the north-east of the county have brick terraces and post-war housing built for mining communities, and modern estates have grown around Derby, Chesterfield and the M1 corridor.
Brick terraces frequently suit loft conversions and rear extensions, and many need repointing. Stone properties in the Peak may call for lime work and planning-sensitive windows, while interwar and estate homes commonly take side extensions and garage conversions.
Knowing the typical building types in Derbyshire helps, but a survey of your own home in Alfreton is what decides the right approach to a new front or back door.
Do you need permission in Alfreton?
As Alfreton is in England, read the following with that system of planning and building control in mind. We check what applies to your house with the council before you receive a quote.
Replacing windows and doors on a house is usually permitted development in England when the new ones look broadly similar to the old. Flats, listed buildings and homes covered by an Article 4 direction can need consent, and conservation areas may limit materials or styles.
Replacement windows and external doors must meet Building Regulations for energy efficiency, ventilation and, on upper floors, escape. The work is either self-certified by an installer registered with a competent person scheme or signed off by building control.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
How does the job run?
A visit to your home
Book a visit and we'll come to you. The survey covers measurements, the state of what's there now and any obvious constraints, so the price that follows is based on your actual home, not an average.
Written quote
You get the price in writing, itemised so you can see where the money goes. As long as the specification stays the same, that is the price you pay for a new front or back door.
Booking the work
We handle the paperwork side: checking whether planning permission or building control approval is needed, submitting applications where they are, and scheduling the trades and materials around your dates.
On site to finish
During the work we protect the areas around it and tidy up at the end of each day. Once complete, we check the finish, remove our materials and hand over paperwork such as building control sign-off where it applies.
Working with SK Home Improvements
Common questions
How do I look after a composite or uPVC door?
Looking after a composite or uPVC door is mostly a matter of regular cleaning with warm soapy water and a soft cloth. Avoid solvents and abrasive pads, which can dull the finish. Once or twice a year, lightly oil the lock mechanism and the moving parts along the edge of the door, and check the seals. If the door starts to catch, the hinges can usually be adjusted easily.
Can you combine a new front or back door with other work?
Yes. Because we manage several trades under one contract, we can plan a new front or back door alongside other work on your Alfreton home, such as new windows with rendering, or a kitchen refit with an extension. Combining jobs can reduce repeat set-up such as scaffolding, skips and access, and every element is listed and priced in the same written quote.
How long does it take to make a new door?
Made-to-measure doors usually take a few weeks to manufacture after the survey and your order are confirmed. Bespoke colours, special glass designs and aluminium doors can take longer. Once the door arrives, we arrange a fitting date that suits you. We give you a realistic lead time with your written quote, and we keep you updated if the manufacturer's dates change.
How long will a new front or back door take?
On a typical home, allow Usually half a day to one day per door. Larger projects, older buildings and extra work found once things are opened up can extend that, while simpler jobs may be shorter. Your quote includes an estimate of time on site, and your point of contact keeps you updated on the programme as the work progresses.
How much does a new front door cost?
A new front door costs £950–£3,400 supplied and fitted, depending on the material, the amount of glass and whether you want side panels. A uPVC back door sits at the lower end, a composite front door in the middle, and aluminium doors or doors with side panels at the top. Locks, letterplates and dual colours also affect the figure. We confirm a fixed price in writing after measuring your opening.
Near Alfreton
Whether you're in the centre of Alfreton or on its outskirts, DE55 addresses are covered. We extend the same service, and the same fixed-price approach, to Ripley, Sutton-in-Ashfield and Kirkby-in-Ashfield.