A replacement front or back door is a new door and frame, usually composite, uPVC or aluminium, made to fit your existing opening and fitted with multi-point locks and weather seals to improve security, warmth and kerb appeal.
For a homeowner in Hereford, planning a new front or back door tends to begin with two questions: what will it cost, and how disruptive will it be? Our guide range is £1,000–£3,400 including VAT, and a typical job runs to Usually half a day to one day per door. Both numbers firm up once we have seen the property, measured up and agreed exactly what is included.
- Guide price
- £1,000–£3,400 inc VAT
- Time on site
- Usually half a day to one day per door
- Postcodes
- HR1
- Planning rules
- England
- Local area
- Herefordshire
- Survey
- Free, with a written quote
How much does a new front or back door cost in Hereford?
To help you plan, we show what a new front or back door typically costs in Hereford instead of holding figures back for a sales call. The range is £1,000–£3,400 with VAT, using rates in the West Midlands that are about 2% below the national guide. A free survey then fixes your actual price.
| Type of job | What it usually involves | Guide in Hereford |
|---|---|---|
| uPVC back door | A standard uPVC back or side door with a half-glazed panel and multi-point lock. | £800–£1,450 |
| Composite front door | A made-to-measure composite door in your chosen colour, glass design and hardware. | £1,200–£2,400 |
| Aluminium or door with side panels | A premium aluminium door, or a composite door with one or two side panels. | £2,400–£4,900 |
Your price depends mostly on:
- Door material: uPVC, composite or aluminium
- Side panels, fanlights and the amount of glass
- Lock, cylinder and hardware specification
- Condition of the opening, threshold and surrounding brickwork
What’s included?
- Measured survey of the opening, threshold and frame condition
- Multi-point locking with anti-snap cylinders and matching handles
- Glazing panels, side panels or fanlights where specified
- Removal and disposal of the old door and frame
- Low threshold options for level or easier access
- Building regulations paperwork where a glazed door needs it
Building in Hereford
Herefordshire is known for black-and-white timber-framed buildings, especially in villages around Weobley, Pembridge and Eardisland. Old Red Sandstone is used widely in churches, farmhouses and walls, Hereford has Victorian terraces and interwar suburbs, and market towns such as Leominster, Ledbury and Ross-on-Wye mix historic centres with newer estates.
A mild, rural county with frost-prone valleys; the Wye and Lugg flood regularly, so ground levels and drainage matter for outdoor work.
So when we survey a Hereford property for a new front or back door, the first step is working out how it was built and what has been changed since.
Do you need permission in Hereford?
Because Hereford falls under England's rules, the guidance below is the version relevant to you. Before sending a price, we check your property's position with the council.
Replacing windows and doors on a house is usually permitted development in England when the new ones look broadly similar to the old. Flats, listed buildings and homes covered by an Article 4 direction can need consent, and conservation areas may limit materials or styles.
Replacement windows and external doors must meet Building Regulations for energy efficiency, ventilation and, on upper floors, escape. The work is either self-certified by an installer registered with a competent person scheme or signed off by building control.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
The four stages
Free site survey
First, someone visits your home in Hereford to see the space, take measurements and note anything that could affect the work, such as access or the condition of what is there. There is no charge for this visit.
Price and scope agreed
Next you receive a written quote with a fixed price for the agreed specification. It lists what is included, what is not, and how payments are staged, so you can compare it properly.
Booking the work
Before anyone starts, we confirm the programme in writing, check whether consents are required and arrange deliveries. If a skip or scaffolding on the road needs a permit, we apply for it.
Finish and handover
On site, the agreed plan is followed and any change is put in writing first. At completion we do a final clean, go through the snagging list with you and leave you with the relevant documents.
Working with SK Home Improvements
Questions about a new front or back door in Hereford
How long does it take to make a new door?
Made-to-measure doors usually take a few weeks to manufacture after the survey and your order are confirmed. Bespoke colours, special glass designs and aluminium doors can take longer. Once the door arrives, we arrange a fitting date that suits you. We give you a realistic lead time with your written quote, and we keep you updated if the manufacturer's dates change.
How do I look after a composite or uPVC door?
Looking after a composite or uPVC door is mostly a matter of regular cleaning with warm soapy water and a soft cloth. Avoid solvents and abrasive pads, which can dull the finish. Once or twice a year, lightly oil the lock mechanism and the moving parts along the edge of the door, and check the seals. If the door starts to catch, the hinges can usually be adjusted easily.
How long will a new front or back door take?
On a typical home, allow Usually half a day to one day per door. Larger projects, older buildings and extra work found once things are opened up can extend that, while simpler jobs may be shorter. Your quote includes an estimate of time on site, and your point of contact keeps you updated on the programme as the work progresses.
What happens at the survey?
We visit your home at a time that suits you, look at the area involved, take measurements and check access, condition and any services that might be affected. We talk through what you want from a new front or back door, explain the options and answer questions. There is no charge and no obligation; afterwards we send a written quote.
What is the difference between a composite and a uPVC door?
A composite door has a tough outer skin over a solid insulated core, so it feels heavier and more solid than uPVC and holds its colour well. A uPVC door is built from reinforced plastic panels and costs less. Both can have multi-point locking and good weather seals. Many people choose composite for the front door and uPVC for back or side doors, where looks matter less.
Also covering areas around Hereford
We cover every part of Hereford, including HR1, and nearby Ross-on-Wye, Leominster and Ledbury. Wherever you are within that patch, the survey is free and the quote comes to you in writing.