A replacement front or back door is a new door and frame, usually composite, uPVC or aluminium, made to fit your existing opening and fitted with multi-point locks and weather seals to improve security, warmth and kerb appeal.
Thinking about a new front or back door in Scarborough? We take charge of the whole project, co-ordinating every trade involved, and one person keeps you updated. Guide prices for Yorkshire and the Humber sit at £950–£3,300 including VAT, and a typical job takes Usually half a day to one day per door. Your own figure depends on what the survey finds and the specification you settle on.
- Guide price
- £950–£3,300 inc VAT
- Time on site
- Usually half a day to one day per door
- Postcodes
- YO11 and YO12
- Planning rules
- England
- Local area
- North Yorkshire
- Survey
- Free, with a written quote
Front and back doors prices in Scarborough
The table below shows guide prices for a new front or back door in Scarborough. They are based on rates in Yorkshire and the Humber, which run about 6% below the national guide, giving an overall range of £950–£3,300. All figures include VAT and are firmed up after a free site survey.
| Type of job | What it usually involves | Guide in Scarborough |
|---|---|---|
| uPVC back door | A standard uPVC back or side door with a half-glazed panel and multi-point lock. | £750–£1,400 |
| Composite front door | A made-to-measure composite door in your chosen colour, glass design and hardware. | £1,150–£2,400 |
| Aluminium or door with side panels | A premium aluminium door, or a composite door with one or two side panels. | £2,400–£4,700 |
Expect these to shape the final quote:
- Door material: uPVC, composite or aluminium
- Side panels, fanlights and the amount of glass
- Lock, cylinder and hardware specification
- Condition of the opening, threshold and surrounding brickwork
What’s included?
- Measured survey of the opening, threshold and frame condition
- Made-to-measure door and frame in your chosen colour and design
- Removal and disposal of the old door and frame
- Low threshold options for level or easier access
- Weather seals, sealant and internal trims finished neatly
- Building regulations paperwork where a glazed door needs it
What are homes like around Scarborough?
York has medieval timber-framed, Georgian and Victorian buildings, Harrogate has stone Victorian villas and terraces, and the Dales and Moors are built of limestone and sandstone, often under stone-slate or pantile roofs. Teesside towns within the county, such as Middlesbrough and Redcar, have Victorian red-brick terraces and post-war estates.
Dales and Moors properties often need lime pointing, roof repairs and window designs acceptable within a national park. Teesside brick terraces suit loft rooms and rear extensions, and estate homes commonly take garage conversions.
Whatever era your Scarborough home dates from, we plan a new front or back door around how it is actually built rather than a one-size-fits-all specification.
Planning and building rules in Scarborough
Scarborough is in England, so the planning and building rules set out below are the ones that apply. We confirm the details with the council before we quote.
Replacing windows and doors on a house is usually permitted development in England when the new ones look broadly similar to the old. Flats, listed buildings and homes covered by an Article 4 direction can need consent, and conservation areas may limit materials or styles.
Replacement windows and external doors must meet Building Regulations for energy efficiency, ventilation and, on upper floors, escape. The work is either self-certified by an installer registered with a competent person scheme or signed off by building control.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
How does the job run?
We look at the job
Book a visit and we'll come to you. The survey covers measurements, the state of what's there now and any obvious constraints, so the price that follows is based on your actual home, not an average.
Your fixed price
The quote arrives in writing, not over the phone. It covers the full scope, the finishes you've chosen, any exclusions and the payment schedule, with a fixed price tied to that specification.
Plan and prepare
Next comes planning the work itself. We set a start date that suits you, line up the right trades, and make sure any approvals for a new front or back door are in place before the first day on site.
Build and hand over
The work is carried out to the agreed specification, with floors and furniture protected and the site kept tidy. At the end we clean up, walk through the finished job with you and hand over any certificates.
How we work
Frequently asked questions
How much will a new front or back door cost in Scarborough?
As a guide, expect to pay £950–£3,300 including VAT for a new front or back door in Scarborough. That range is adjusted for Yorkshire and the Humber, which runs about 6% below the national guide. Where your project lands depends on size, materials, access and the condition of what is already there. We confirm a fixed price in writing after a free survey of your home.
Do I need permission to change my front door?
Planning permission is not usually needed to replace a front door, but it depends on the style and size of the change, your home's location, whether it is listed or in a conservation area, and which UK nation you are in. Listed homes generally need consent for any change, and some conservation areas control colours and styles. Flat entrance doors in shared buildings must also meet fire rules. We check before quoting.
What is the difference between a composite and a uPVC door?
A composite door has a tough outer skin over a solid insulated core, so it feels heavier and more solid than uPVC and holds its colour well. A uPVC door is built from reinforced plastic panels and costs less. Both can have multi-point locking and good weather seals. Many people choose composite for the front door and uPVC for back or side doors, where looks matter less.
How do I look after a composite or uPVC door?
Looking after a composite or uPVC door is mostly a matter of regular cleaning with warm soapy water and a soft cloth. Avoid solvents and abrasive pads, which can dull the finish. Once or twice a year, lightly oil the lock mechanism and the moving parts along the edge of the door, and check the seals. If the door starts to catch, the hinges can usually be adjusted easily.
Can you combine a new front or back door with other work?
Yes. Because we manage several trades under one contract, we can plan a new front or back door alongside other work on your Scarborough home, such as new windows with rendering, or a kitchen refit with an extension. Combining jobs can reduce repeat set-up such as scaffolding, skips and access, and every element is listed and priced in the same written quote.
Also covering areas around Scarborough
We survey and quote throughout Scarborough's YO11 and YO12 postcodes and in surrounding places such as Bridlington, Beverley and Redcar. The process and pricing approach are identical in each of them.