A replacement front or back door is a new door and frame, usually composite, uPVC or aluminium, made to fit your existing opening and fitted with multi-point locks and weather seals to improve security, warmth and kerb appeal.
We arrange a new front or back door for homeowners in Thornaby-on-Tees and the wider North Yorkshire. The job is planned, priced and managed by us and carried out by tradespeople engaged under our contract, so there is one agreement and one contact. On a typical home the work takes Usually half a day to one day per door, and guide pricing in Yorkshire and the Humber is £950–£3,300, VAT included.
- Guide price
- £950–£3,300 inc VAT
- Time on site
- Usually half a day to one day per door
- Postcodes
- TS5, TS16, TS17 and TS18
- Planning rules
- England
- Local area
- Stockton-on-Tees
- Survey
- Free, with a written quote
How much does a new front or back door cost in Thornaby-on-Tees?
Prices for a new front or back door vary from house to house, but in Thornaby-on-Tees most projects fall within £950–£3,300 including VAT. That reflects costs in Yorkshire and the Humber, about 6% below the national guide. Treat the table as a budgeting aid; the written figure follows a survey we carry out for free.
| Type of job | What it usually involves | Guide in Thornaby-on-Tees |
|---|---|---|
| uPVC back door | A standard uPVC back or side door with a half-glazed panel and multi-point lock. | £750–£1,400 |
| Composite front door | A made-to-measure composite door in your chosen colour, glass design and hardware. | £1,150–£2,400 |
| Aluminium or door with side panels | A premium aluminium door, or a composite door with one or two side panels. | £2,400–£4,700 |
The main things that change the figure:
- Door material: uPVC, composite or aluminium
- Lock, cylinder and hardware specification
- Colour, including different colours inside and out
- Condition of the opening, threshold and surrounding brickwork
Scope of the work
- Measured survey of the opening, threshold and frame condition
- Made-to-measure door and frame in your chosen colour and design
- Removal and disposal of the old door and frame
- Low threshold options for level or easier access
- Weather seals, sealant and internal trims finished neatly
- Building regulations paperwork where a glazed door needs it
Local housing and a new front or back door
York has medieval timber-framed, Georgian and Victorian buildings, Harrogate has stone Victorian villas and terraces, and the Dales and Moors are built of limestone and sandstone, often under stone-slate or pantile roofs. Teesside towns within the county, such as Middlesbrough and Redcar, have Victorian red-brick terraces and post-war estates.
Dales and Moors properties often need lime pointing, roof repairs and window designs acceptable within a national park. Teesside brick terraces suit loft rooms and rear extensions, and estate homes commonly take garage conversions.
So when we survey a Thornaby-on-Tees property for a new front or back door, the first step is working out how it was built and what has been changed since.
Permissions for a new front or back door in Thornaby-on-Tees
Homes in Thornaby-on-Tees come under the regulations for England, summarised below. We don't rely on general rules alone: we confirm the position for your address with the council before a quote goes out.
Replacing windows and doors on a house is usually permitted development in England when the new ones look broadly similar to the old. Flats, listed buildings and homes covered by an Article 4 direction can need consent, and conservation areas may limit materials or styles.
Replacement windows and external doors must meet Building Regulations for energy efficiency, ventilation and, on upper floors, escape. The work is either self-certified by an installer registered with a competent person scheme or signed off by building control.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
The four stages
Survey and measure
We arrange a free site survey on a date convenient to you. We measure up, look at the existing structure and access, and discuss your plans for a new front or back door so the price reflects your home.
Written quote
After the survey we send a quote for a new front or back door that fixes the price for the scope we've agreed. If you want to change materials or scope, we revise it in writing before anything is booked.
Dates and permissions
Preparation matters as much as the build. We agree access, parking and working hours with you, order materials in good time, and confirm any permissions so the job isn't held up once it starts.
On site to finish
Our trades complete a new front or back door while your point of contact keeps you updated. When everything is finished, we clear the site, take away waste and go through the result with you before handover.
What you can expect from us
Front and back doors in Thornaby-on-Tees: questions
How long will my home be open while the door is fitted?
Fitting a new door usually takes half a day to a full day, and your home is only open for the short time between taking out the old frame and fixing the new one. We keep the opening covered if there is any delay, and we never leave a doorway insecure overnight. Once the frame is fixed, we hang the door, adjust the locks, seal around the frame and finish the trims.
Can you combine a new front or back door with other work?
Yes. Because we manage several trades under one contract, we can plan a new front or back door alongside other work on your Thornaby-on-Tees home, such as new windows with rendering, or a kitchen refit with an extension. Combining jobs can reduce repeat set-up such as scaffolding, skips and access, and every element is listed and priced in the same written quote.
Can I have a low threshold for wheelchair or pushchair access?
A low threshold is a flat or very shallow sill that makes a doorway easier to cross with a wheelchair, walking frame or pushchair. Most composite, uPVC and aluminium doors can be supplied with one. The outside ground level and drainage need checking, because a low threshold must still keep rainwater out. We look at this during the survey and suggest a channel drain or small ramp if needed.
Is the price fixed?
Yes, for the specification we agree. Your written quote sets out exactly what is included at a fixed price. It only changes if you ask for something different, or if a problem the survey could not reasonably reveal later needs extra work. In either case we explain the change and confirm it in writing before going ahead.
How do I look after a composite or uPVC door?
Looking after a composite or uPVC door is mostly a matter of regular cleaning with warm soapy water and a soft cloth. Avoid solvents and abrasive pads, which can dull the finish. Once or twice a year, lightly oil the lock mechanism and the moving parts along the edge of the door, and check the seals. If the door starts to catch, the hinges can usually be adjusted easily.
Near Thornaby-on-Tees
From TS5, TS16, TS17 and TS18 to the edges of Thornaby-on-Tees and on into Stockton-on-Tees, Yarm and Billingham, we can arrange a site visit and a written quote for your project, planned around dates that work for you.