A replacement front or back door is a new door and frame, usually composite, uPVC or aluminium, made to fit your existing opening and fitted with multi-point locks and weather seals to improve security, warmth and kerb appeal.
Every house in Stockton-on-Tees is a little different, so we never price a new front or back door from a brochure. We look at the structure, access and existing finishes first, then put in writing a fixed figure for the scope we settle on. As a rough steer, homeowners in the North East should budget £900–£3,200 including VAT, with work typically taking Usually half a day to one day per door.
- Guide price
- £900–£3,200 inc VAT
- Time on site
- Usually half a day to one day per door
- Postcodes
- TS17, TS18, TS19 and TS20
- Planning rules
- England
- Local area
- County Durham
- Survey
- Free, with a written quote
How much does a new front or back door cost in Stockton-on-Tees?
Below is a breakdown of typical costs for a new front or back door in Stockton-on-Tees. Because rates in the North East are about 10% below the national guide, the overall guide comes to £900–£3,200, including VAT. Size, materials and access move the figure, and a free-of-charge survey settles it.
| Type of job | What it usually involves | Guide in Stockton-on-Tees |
|---|---|---|
| uPVC back door | A standard uPVC back or side door with a half-glazed panel and multi-point lock. | £700–£1,350 |
| Composite front door | A made-to-measure composite door in your chosen colour, glass design and hardware. | £1,100–£2,200 |
| Aluminium or door with side panels | A premium aluminium door, or a composite door with one or two side panels. | £2,200–£4,500 |
Expect these to shape the final quote:
- Door material: uPVC, composite or aluminium
- Side panels, fanlights and the amount of glass
- Colour, including different colours inside and out
- Condition of the opening, threshold and surrounding brickwork
What do you get?
- Measured survey of the opening, threshold and frame condition
- Made-to-measure door and frame in your chosen colour and design
- Glazing panels, side panels or fanlights where specified
- Removal and disposal of the old door and frame
- Weather seals, sealant and internal trims finished neatly
- Building regulations paperwork where a glazed door needs it
Building in Stockton-on-Tees
Colliery villages across County Durham are lined with brick and stone terraces, many built for mining families. Durham City has Georgian and Victorian streets, Darlington has Victorian terraces and villas, and Peterlee and Newton Aycliffe were planned as post-war new towns. Dales farmhouses in Weardale and Teesdale are stone, often under stone or slate roofs.
Winters are cold and the upland dales see snow and strong winds; former coal workings mean ground checks can be needed before building extensions.
That mix of housing shapes how we approach a new front or back door in Stockton-on-Tees: the age and construction of your home affect the materials, the method and, in the end, the price.
Permissions for a new front or back door in Stockton-on-Tees
For anyone in Stockton-on-Tees, the relevant framework is England's. The summary below is general, so we always contact the council about your address before putting a price in writing.
Replacing windows and doors on a house is usually permitted development in England when the new ones look broadly similar to the old. Flats, listed buildings and homes covered by an Article 4 direction can need consent, and conservation areas may limit materials or styles.
Replacement windows and external doors must meet Building Regulations for energy efficiency, ventilation and, on upper floors, escape. The work is either self-certified by an installer registered with a competent person scheme or signed off by building control.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
The four stages
We look at the job
A free survey comes first. It gives us what we need to price a new front or back door properly, including dimensions, existing materials and access for deliveries, and gives you the chance to ask anything you like.
Your fixed price
After the survey we send a quote for a new front or back door that fixes the price for the scope we've agreed. If you want to change materials or scope, we revise it in writing before anything is booked.
Getting ready
Preparation matters as much as the build. We agree access, parking and working hours with you, order materials in good time, and confirm any permissions so the job isn't held up once it starts.
On site to finish
The job proceeds in the order set out in the programme, with dust and debris kept under control. Finally we tidy away, inspect the work together and pass the finished project over to you with its paperwork.
How we work
Frequently asked questions
What is the difference between a composite and a uPVC door?
A composite door has a tough outer skin over a solid insulated core, so it feels heavier and more solid than uPVC and holds its colour well. A uPVC door is built from reinforced plastic panels and costs less. Both can have multi-point locking and good weather seals. Many people choose composite for the front door and uPVC for back or side doors, where looks matter less.
Do you cover Billingham, Thornaby-on-Tees and Middlesbrough?
Yes. As well as Stockton-on-Tees, we cover Billingham, Thornaby-on-Tees and Middlesbrough and the rest of County Durham. Our coverage is UK-wide, so the process is the same wherever you are: a free site survey, a quote in writing that fixes the price for the agreed scope, and one point of contact while the work is planned and carried out.
How do I look after a composite or uPVC door?
Looking after a composite or uPVC door is mostly a matter of regular cleaning with warm soapy water and a soft cloth. Avoid solvents and abrasive pads, which can dull the finish. Once or twice a year, lightly oil the lock mechanism and the moving parts along the edge of the door, and check the seals. If the door starts to catch, the hinges can usually be adjusted easily.
Can I stay at home during the work?
In most cases, yes. Most people can live at home throughout, and we plan the work to keep disruption down by protecting floors, agreeing working hours and keeping access routes clear. Bigger jobs affecting kitchens, bathrooms or heating may mean a short spell with reduced facilities, and we talk this through with you at the survey.
How long does it take to make a new door?
Made-to-measure doors usually take a few weeks to manufacture after the survey and your order are confirmed. Bespoke colours, special glass designs and aluminium doors can take longer. Once the door arrives, we arrange a fitting date that suits you. We give you a realistic lead time with your written quote, and we keep you updated if the manufacturer's dates change.
Near Stockton-on-Tees
We cover every part of Stockton-on-Tees, including TS17, TS18, TS19 and TS20, and nearby Billingham, Thornaby-on-Tees and Middlesbrough. Wherever you are within that patch, the survey is free and the quote comes to you in writing.