A replacement front or back door is a new door and frame, usually composite, uPVC or aluminium, made to fit your existing opening and fitted with multi-point locks and weather seals to improve security, warmth and kerb appeal.
Addresses across IP11 fall within our coverage for a new front or back door, so if your home is in Felixstowe we can arrange a survey on a day that works for you. We inspect the existing building, discuss materials and layout, and then price the agreed specification in writing. Expect a guide range of £1,050–£3,700 including VAT before that visit.
- Guide price
- £1,050–£3,700 inc VAT
- Time on site
- Usually half a day to one day per door
- Postcodes
- IP11
- Planning rules
- England
- Local area
- Suffolk
- Survey
- Free, with a written quote
How much does a new front or back door cost in Felixstowe?
Budgeting for a new front or back door in Felixstowe? The numbers below include VAT and are adjusted for the East of England, where costs are about 5% above the national guide. The headline range is £1,050–£3,700. Nothing is final until we have measured up at a free survey and agreed the specification with you.
| Type of job | What it usually involves | Guide in Felixstowe |
|---|---|---|
| uPVC back door | A standard uPVC back or side door with a half-glazed panel and multi-point lock. | £850–£1,600 |
| Composite front door | A made-to-measure composite door in your chosen colour, glass design and hardware. | £1,250–£2,600 |
| Aluminium or door with side panels | A premium aluminium door, or a composite door with one or two side panels. | £2,600–£5,200 |
Expect these to shape the final quote:
- Door material: uPVC, composite or aluminium
- Side panels, fanlights and the amount of glass
- Lock, cylinder and hardware specification
- Condition of the opening, threshold and surrounding brickwork
What does the job include in Felixstowe?
- Made-to-measure door and frame in your chosen colour and design
- Multi-point locking with anti-snap cylinders and matching handles
- Glazing panels, side panels or fanlights where specified
- Low threshold options for level or easier access
- Weather seals, sealant and internal trims finished neatly
- Building regulations paperwork where a glazed door needs it
Local housing and a new front or back door
Suffolk villages are full of timber-framed cottages, many limewashed in traditional colours such as Suffolk pink, with pargeting and thatch in places. Flint and pale gault brick are common too. Ipswich has Victorian terraces and interwar estates, Bury St Edmunds has Georgian streets, and Lowestoft and Felixstowe mix Victorian seaside housing with newer estates.
Timber-framed buildings need breathable lime plaster and render, and roof repairs that suit the original materials. Terraces suit loft conversions and rear extensions, while newer homes commonly take garage conversions and porches.
So when we survey a Felixstowe property for a new front or back door, the first step is working out how it was built and what has been changed since.
Permissions for a new front or back door in Felixstowe
Because Felixstowe falls under England's rules, the guidance below is the version relevant to you. Before sending a price, we check your property's position with the council.
Replacing windows and doors on a house is usually permitted development in England when the new ones look broadly similar to the old. Flats, listed buildings and homes covered by an Article 4 direction can need consent, and conservation areas may limit materials or styles.
Replacement windows and external doors must meet Building Regulations for energy efficiency, ventilation and, on upper floors, escape. The work is either self-certified by an installer registered with a competent person scheme or signed off by building control.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
What happens after you get in touch?
Free site survey
Book a visit and we'll come to you. The survey covers measurements, the state of what's there now and any obvious constraints, so the price that follows is based on your actual home, not an average.
Price and scope agreed
Next you receive a written quote with a fixed price for the agreed specification. It lists what is included, what is not, and how payments are staged, so you can compare it properly.
Getting ready
With the quote agreed, we book the work in and handle preparation: permissions where needed, building control notifications, material orders and access arrangements for your Felixstowe property.
Build and hand over
Work goes ahead as scheduled and you deal with one contact throughout. When the last trade leaves, we clear and clean the site, talk you through what has been done and pass on any certificates and care instructions.
How we work
Questions about a new front or back door in Felixstowe
How do I look after a composite or uPVC door?
Looking after a composite or uPVC door is mostly a matter of regular cleaning with warm soapy water and a soft cloth. Avoid solvents and abrasive pads, which can dull the finish. Once or twice a year, lightly oil the lock mechanism and the moving parts along the edge of the door, and check the seals. If the door starts to catch, the hinges can usually be adjusted easily.
What happens at the survey?
We visit your home at a time that suits you, look at the area involved, take measurements and check access, condition and any services that might be affected. We talk through what you want from a new front or back door, explain the options and answer questions. There is no charge and no obligation; afterwards we send a written quote.
How long does it take to make a new door?
Made-to-measure doors usually take a few weeks to manufacture after the survey and your order are confirmed. Bespoke colours, special glass designs and aluminium doors can take longer. Once the door arrives, we arrange a fitting date that suits you. We give you a realistic lead time with your written quote, and we keep you updated if the manufacturer's dates change.
Do you cover Harwich, Ipswich and Clacton-on-Sea?
Yes. As well as Felixstowe, we cover Harwich, Ipswich and Clacton-on-Sea and the rest of Suffolk. Our coverage is UK-wide, so the process is the same wherever you are: a free site survey, a quote in writing that fixes the price for the agreed scope, and one point of contact while the work is planned and carried out.
What is the difference between a composite and a uPVC door?
A composite door has a tough outer skin over a solid insulated core, so it feels heavier and more solid than uPVC and holds its colour well. A uPVC door is built from reinforced plastic panels and costs less. Both can have multi-point locking and good weather seals. Many people choose composite for the front door and uPVC for back or side doors, where looks matter less.
Near Felixstowe
Coverage for Felixstowe spans IP11. Close by, Harwich, Ipswich and Clacton-on-Sea are covered too, and the rest of our UK-wide area follows the same survey-then-quote process from start to finish.