A loft conversion turns unused roof space into a habitable room such as a bedroom, bathroom or office, with a proper staircase, insulation, fire protection and natural light from rooflights or a dormer.
Addresses across BS15 and BS16 fall within our coverage for a loft conversion, so if your home is in Kingswood we can arrange a survey on a day that works for you. We inspect the existing building, discuss materials and layout, and then price the agreed specification in writing. Expect a guide range of £30,500–£66,000 including VAT before that visit.
- Guide price
- £30,500–£66,000 inc VAT
- Time on site
- 6–10 weeks on site
- Postcodes
- BS15 and BS16
- Planning rules
- England
- Local area
- South Gloucestershire
- Survey
- Free, with a written quote
What should you budget for a loft conversion in Kingswood?
What should you budget for a loft conversion in Kingswood? Use the figures below as a starting point. Prices in the South West sit about 2% above the national guide, so the range here is £30,500–£66,000 including VAT. Your fixed price comes in writing once we've surveyed the property, at no charge.
| Type of job | What it usually involves | Guide in Kingswood |
|---|---|---|
| Rooflight conversion | Rooflights in the existing slope, a new floor, staircase and insulation, where head height already works. | £20,500–£35,500 |
| Dormer conversion | A rear dormer adding headroom and floor space, often with a bedroom and shower room. | £32,500–£61,000 |
| Hip-to-gable or mansard | Larger structural changes to the roof for the maximum usable space. | £51,000–£87,000 |
The main things that change the figure:
- Conversion type: rooflight, dormer, hip-to-gable or mansard
- Floor area, existing head height and roof structure
- Steelwork and any strengthening of walls below
- Staircase layout, fire doors and the level of finishes
Scope of the work
- Structural calculations and steel beams where needed
- New floor joists strong enough for a habitable room
- Dormer, hip-to-gable or rooflight structure as agreed
- Staircase designed to fit your landing and meet regulations
- Insulation to walls, roof slope and floor
- Plastering, internal doors and building control sign-off
Local housing and a loft conversion
Golden Cotswold limestone defines towns and villages such as Cirencester, Stow and Tetbury, often with stone-slate roofs. Cheltenham is known for Regency stucco terraces and villas, Gloucester has Victorian brick terraces and interwar estates, the Stroud valleys have mill-era stone cottages, and the Forest of Dean uses its own sandstone.
The Cotswold escarpment is exposed to wind and rain, while low ground along the Severn has a well-known flood risk.
For a loft conversion in Kingswood, this means checking things like wall construction, roof structure and existing services before we put a figure on paper.
Permissions for a loft conversion in Kingswood
Planning law differs across the UK. For a home in Kingswood, it is the England rules below that count, and we check them with the council ahead of any quote.
In England, many loft conversions are permitted development: up to 40 m³ of extra roof space on a terraced house and 50 m³ on a semi-detached or detached house, no dormer on the front roof slope facing a road, nothing higher than the existing roof, and similar-looking materials. Conservation areas, listed buildings and flats need planning permission.
Building Regulations approval is always needed for a loft conversion: floor strength, a proper staircase, insulation, fire-protected escape route and smoke alarms. The Party Wall etc. Act 1996 usually applies on attached houses.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
The four stages
We look at the job
A free survey comes first. It gives us what we need to price a loft conversion properly, including dimensions, existing materials and access for deliveries, and gives you the chance to ask anything you like.
Your fixed price
We turn the survey notes into a written quote. The price is fixed for the specification we agree, and the document sets out materials, scope and payment stages in plain language.
Getting ready
We handle the paperwork side: checking whether planning permission or building control approval is needed, submitting applications where they are, and scheduling the trades and materials around your dates.
On site to finish
Work goes ahead as scheduled and you deal with one contact throughout. When the last trade leaves, we clear and clean the site, talk you through what has been done and pass on any certificates and care instructions.
What you can expect from us
Common questions
Is my loft suitable for conversion?
A loft is usually suitable for conversion if there is enough head height, a roof structure that can be adapted and space for a staircase. A common rule of thumb is at least 2.2m from the top of the ceiling joists to the underside of the ridge, though dormers and mansards can create height where it is short. Modern trussed roofs need more structural work. We check all of this at the survey.
Do you cover Mangotsfield, Keynsham and Bishopsworth?
Yes. As well as Kingswood, we cover Mangotsfield, Keynsham and Bishopsworth and the rest of Gloucestershire. Our coverage is UK-wide, so the process is the same wherever you are: a free site survey, a quote in writing that fixes the price for the agreed scope, and one point of contact while the work is planned and carried out.
Who do I deal with during the job?
One point of contact manages your project from survey to handover. They schedule the trades working under our contract, keep you updated on progress, and are the person to call with any question. You don't need to coordinate builders, electricians or decorators separately, because that is part of what we do.
How much does a loft conversion cost?
A typical dormer loft conversion on a 3-bed semi costs £30,500–£66,000. A simple rooflight conversion costs less, while hip-to-gable and mansard conversions cost more because they change the roof structure. As a rough guide, allow around £800–£1,700 per square metre of new floor plus fixed costs for the staircase, steels and fees. Adding a shower room is the most common extra. We confirm a fixed price after surveying your loft.
Does the Party Wall Act apply to a loft conversion?
The Party Wall etc. Act 1996 applies in England and Wales only, and loft conversions on terraced and semi-detached houses often fall within it, because steel beams are usually set into the shared wall. You must serve notice on the neighbour before work starts, and they can agree or appoint a surveyor. Scotland and Northern Ireland have no equivalent Act. We tell you during the survey whether notices are likely.
Also covering areas around Kingswood
From BS15 and BS16 to the edges of Kingswood and on into Mangotsfield, Keynsham and Bishopsworth, we can arrange a site visit and a written quote for your project, planned around dates that work for you.