Plastering is applying a smooth finishing coat of plaster to walls and ceilings, either as a thin skim over sound surfaces or as a full re-plaster after removing failed plaster, creating a flat surface ready for decoration.
We offer plastering and skimming throughout Bedfordshire, from Luton, Bedford, Dunstable and Leighton Buzzard to the smaller places in between. Each project starts with a free survey at your home and ends with a written figure, fixed for the work you choose. Because Bedfordshire is in England, we work to the planning system and building standards used there, and guide prices for the East of England run at £600–£1,700 including VAT.
- Guide price
- £600–£1,700 inc VAT
- Time on site
- 1–3 days per room, plus drying time
- Planning rules
- England
- Price level
- About 5% above the national guide
- Towns listed
- 6
- Survey
- Free, with a written quote
How much does plastering and skimming cost in Bedfordshire?
Use the table to gauge the cost of plastering and skimming in Bedfordshire before we visit. Figures include VAT and are scaled for the East of England, coming out about 5% above the national guide, which gives £600–£1,700 overall. After a free survey, you receive a fixed written price.
| Type of job | What it usually involves | Guide in Bedfordshire |
|---|---|---|
| Patch repairs or one wall | Repairing cracks, filling cable channels after a rewire or skimming a single wall. | £150–£500 |
| One room, walls and ceiling | Skimming or boarding and skimming the walls and ceiling of a typical room. | £600–£1,700 |
| Whole house | Skimming or re-plastering most rooms in a typical 3-bed house during a renovation. | £5,200–£12,500 |
Your price depends mostly on:
- Total wall and ceiling area to be plastered
- Ceiling height, stairwells and access
- Removing artex, wallpaper or failed plaster first
- Number of corners, windows and openings to bead
What do you get?
- Removal of loose or failed plaster and old wallpaper
- Plasterboard fixed to ceilings or walls where needed
- Angle beads and stop beads for straight corners and edges
- Skim coat or full two-coat plaster to agreed areas
- Patching around new sockets, pipes and windows
- Waste removal and a tidy finish ready for decorating
Homes in Bedfordshire
Bedfordshire has a long brick-making history, and brick dominates: Victorian terraces in Bedford and Luton, interwar semis, large post-war estates around Luton and Dunstable, and newer developments near Bedford and Biggleswade. Villages in the north of the county keep limestone cottages, with timber framing and thatch scattered across older settlements.
Terraced houses here often benefit from rear extensions, loft rooms and repointing. Interwar and post-war semis commonly suit kitchen extensions, porches and garage conversions, while older village properties may call for lime plastering and sympathetic window replacements.
Bedfordshire is relatively dry, and its clay soils can shrink in long, dry summers, so foundation depth and nearby trees matter for extensions.
Do you need permission in Bedfordshire?
Planning law differs across the UK. For a home in Bedfordshire, it is the England rules below that count, and we check them with the council ahead of any quote.
Internal work such as a new kitchen, bathroom, flooring, plastering or decorating does not need planning permission in England, unless the house is listed, when listed building consent may be needed even for internal changes.
Some internal work is covered by Building Regulations: new electrical circuits and work in bathrooms (Part P), new drainage, structural changes, extractor ventilation and any new window. Notifiable work is certified by a registered installer or by building control.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
How does the job run?
Survey and measure
We begin by looking at the job in person. During the free survey we discuss options, materials and budget for plastering and skimming, and photograph or measure anything the quote needs to reflect.
Written quote
Next you receive a written quote with a fixed price for the agreed specification. It lists what is included, what is not, and how payments are staged, so you can compare it properly.
Getting ready
Next comes planning the work itself. We set a start date that suits you, line up the right trades, and make sure any approvals for plastering and skimming are in place before the first day on site.
On site to finish
The job proceeds in the order set out in the programme, with dust and debris kept under control. Finally we tidy away, inspect the work together and pass the finished project over to you with its paperwork.
What you can expect from us
Questions about plastering and skimming in Bedfordshire
Who do I deal with during the job?
One point of contact manages your project from survey to handover. They schedule the trades working under our contract, keep you updated on progress, and are the person to call with any question. You don't need to coordinate builders, electricians or decorators separately, because that is part of what we do.
When can I paint new plaster?
New plaster can be painted once it is fully dry and evenly pale in colour. The first coat should be a mist coat, which is watered-down emulsion or a specialist primer that soaks into the plaster and seals it. Applying normal emulsion straight on can cause peeling. Vinyl or wipeable paints should be avoided for the first coat, because they stop moisture escaping.
How messy is plastering?
Plastering is wet work, so some mess is unavoidable, but good protection keeps it under control. We cover floors with dust sheets, mask sockets, switches and skirting, and move or cover furniture. Removing old plaster creates the most dust, so we seal doorways and keep the area ventilated. At the end, we clear waste and leave the room tidy and ready for decorating.
What is the difference between skimming and re-plastering?
Skimming applies a thin finishing coat, a few millimetres thick, over plaster or plasterboard that is still sound. Re-plastering removes the old plaster back to the brick or block and applies new base and finishing coats. Skimming is quicker and cheaper, but if the existing plaster is loose, hollow or crumbling, a skim will not hold. We tap-test walls to decide which is needed.
Do I need planning permission in Bedfordshire?
It depends on the work, the size of the project, your property type and whether the building is listed or in a conservation area. Bedfordshire is in England, so England's rules apply. Many smaller jobs need no planning application, but some still need building control approval. We check what applies to your address before quoting.
Towns in Bedfordshire
Looking for plastering and skimming somewhere in Bedfordshire? Start with the towns below; each links to a page with pricing for your region and coverage details.