Plastering is applying a smooth finishing coat of plaster to walls and ceilings, either as a thin skim over sound surfaces or as a full re-plaster after removing failed plaster, creating a flat surface ready for decoration.
Whatever prompted you to look into plastering and skimming, whether wear and tear, a growing family or plans to move, we can survey your Kempston home and give you a price in writing. Homes in the East of England typically come in at £600–£1,700, VAT included, for this kind of work. We also cover Bedford, Ampthill and Milton Keynes, and the same steps apply wherever you are in Bedfordshire.
- Guide price
- £600–£1,700 inc VAT
- Time on site
- 1–3 days per room, plus drying time
- Postcodes
- MK42
- Planning rules
- England
- Local area
- Bedford Borough
- Survey
- Free, with a written quote
What should you budget for plastering and skimming in Kempston?
What will plastering and skimming cost in Kempston? Our guide range is £600–£1,700 including VAT. That figure is adjusted for the East of England, about 5% above the national guide, and is intended for planning a budget. A firm written price for your chosen specification follows a free survey at your home.
| Type of job | What it usually involves | Guide in Kempston |
|---|---|---|
| Patch repairs or one wall | Repairing cracks, filling cable channels after a rewire or skimming a single wall. | £150–£500 |
| One room, walls and ceiling | Skimming or boarding and skimming the walls and ceiling of a typical room. | £600–£1,700 |
| Whole house | Skimming or re-plastering most rooms in a typical 3-bed house during a renovation. | £5,200–£12,500 |
Your price depends mostly on:
- Total wall and ceiling area to be plastered
- Ceiling height, stairwells and access
- Removing artex, wallpaper or failed plaster first
- Number of corners, windows and openings to bead
Scope of the work
- Floor and furniture protection with dust sheets and masking
- Removal of loose or failed plaster and old wallpaper
- Plasterboard fixed to ceilings or walls where needed
- Angle beads and stop beads for straight corners and edges
- Skim coat or full two-coat plaster to agreed areas
- Patching around new sockets, pipes and windows
Local housing and plastering and skimming
Bedfordshire has a long brick-making history, and brick dominates: Victorian terraces in Bedford and Luton, interwar semis, large post-war estates around Luton and Dunstable, and newer developments near Bedford and Biggleswade. Villages in the north of the county keep limestone cottages, with timber framing and thatch scattered across older settlements.
Bedfordshire is relatively dry, and its clay soils can shrink in long, dry summers, so foundation depth and nearby trees matter for extensions.
For plastering and skimming in Kempston, this means checking things like wall construction, roof structure and existing services before we put a figure on paper.
Planning and building rules in Kempston
Which rules apply depends on where you live. For Kempston, the answer is England, and the points below reflect that; we verify them with the council before quoting.
Internal work such as a new kitchen, bathroom, flooring, plastering or decorating does not need planning permission in England, unless the house is listed, when listed building consent may be needed even for internal changes.
Some internal work is covered by Building Regulations: new electrical circuits and work in bathrooms (Part P), new drainage, structural changes, extractor ventilation and any new window. Notifiable work is certified by a registered installer or by building control.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
The four stages
We look at the job
Book a visit and we'll come to you. The survey covers measurements, the state of what's there now and any obvious constraints, so the price that follows is based on your actual home, not an average.
Price and scope agreed
Next you receive a written quote with a fixed price for the agreed specification. It lists what is included, what is not, and how payments are staged, so you can compare it properly.
Getting ready
With the quote agreed, we book the work in and handle preparation: permissions where needed, building control notifications, material orders and access arrangements for your Kempston property.
Finish and handover
The work is carried out to the agreed specification, with floors and furniture protected and the site kept tidy. At the end we clean up, walk through the finished job with you and hand over any certificates.
How we work
Plastering and skimming in Kempston: questions
How much does it cost to plaster a room?
Skimming the walls and ceiling of a typical double bedroom costs £600–£1,700, depending on the room size, the state of the existing surfaces and whether new plasterboard is needed. As a guide, a skim coat costs roughly £15–£35 per square metre, while a full re-plaster back to brick costs more. Stairwells and high ceilings add access costs. We confirm a fixed price after inspecting the walls.
Can you combine plastering and skimming with other work?
Yes. Because we manage several trades under one contract, we can plan plastering and skimming alongside other work on your Kempston home, such as new windows with rendering, or a kitchen refit with an extension. Combining jobs can reduce repeat set-up such as scaffolding, skips and access, and every element is listed and priced in the same written quote.
How messy is plastering?
Plastering is wet work, so some mess is unavoidable, but good protection keeps it under control. We cover floors with dust sheets, mask sockets, switches and skirting, and move or cover furniture. Removing old plaster creates the most dust, so we seal doorways and keep the area ventilated. At the end, we clear waste and leave the room tidy and ready for decorating.
Can you plaster over artex?
Artex and similar textured ceilings can usually be covered, either by applying a bonding coat and then a skim, or by fixing new plasterboard over the top and skimming that. Some older textured coatings contain hazardous fibres, so they should not be sanded or scraped until a sample has been tested. We can arrange a test before quoting and choose a method that avoids disturbing the coating.
Who do I deal with during the job?
One point of contact manages your project from survey to handover. They schedule the trades working under our contract, keep you updated on progress, and are the person to call with any question. You don't need to coordinate builders, electricians or decorators separately, because that is part of what we do.
Nearby towns
We welcome enquiries from all MK42 postcodes in Kempston, plus Bedford, Ampthill and Milton Keynes. Each one gets the same survey at no charge and a written price fixed for the work described.