County Antrim · Plastering & Decorating

Plastering and skimming in Larne

From the first visit to the final check, plastering and skimming in Larne is planned and managed for you.

Freshly skimmed plaster wall drying, with a hawk and trowel

Free survey in Larne

Tell us about the job and we will be in touch to arrange a visit.

Prefer to talk? Call 0800 088 6341 or start a live chat.

Plastering is applying a smooth finishing coat of plaster to walls and ceilings, either as a thin skim over sound surfaces or as a full re-plaster after removing failed plaster, creating a flat surface ready for decoration.

Addresses across BT40 fall within our coverage for plastering and skimming, so if your home is in Larne we can arrange a survey on a day that works for you. We inspect the existing building, discuss materials and layout, and then price the agreed specification in writing. Expect a guide range of £450–£1,400 including VAT before that visit.

Guide price
£450–£1,400 inc VAT
Time on site
1–3 days per room, plus drying time
Postcodes
BT40
Planning rules
Northern Ireland
Local area
County Antrim
Survey
Free, with a written quote

How much does plastering and skimming cost in Larne?

To help you plan, we show what plastering and skimming typically costs in Larne instead of holding figures back for a sales call. The range is £450–£1,400 with VAT, using rates in Northern Ireland that are about 14% below the national guide. A free survey then fixes your actual price.

Type of jobWhat it usually involvesGuide in Larne
Patch repairs or one wallRepairing cracks, filling cable channels after a rewire or skimming a single wall.£150–£450
One room, walls and ceilingSkimming or boarding and skimming the walls and ceiling of a typical room.£450–£1,400
Whole houseSkimming or re-plastering most rooms in a typical 3-bed house during a renovation.£4,300–£10,500

What moves the price up or down:

  • Total wall and ceiling area to be plastered
  • Skim over sound plaster or full re-plaster back to brick
  • Ceiling height, stairwells and access
  • Number of corners, windows and openings to bead

Scope of the work

  • Survey of walls and ceilings, including tap-testing for hollow plaster
  • Floor and furniture protection with dust sheets and masking
  • Plasterboard fixed to ceilings or walls where needed
  • Angle beads and stop beads for straight corners and edges
  • Patching around new sockets, pipes and windows
  • Waste removal and a tidy finish ready for decorating
Board and skimNew plasterboard fixed over old ceilings or walls, then skimmed, often used over artex.
Full re-plasterOld plaster removed back to brick and replaced with base and finishing coats.
Dot and dab dryliningPlasterboard bonded to masonry walls for a quick, flat finish before skimming.
Lime plasterBreathable lime-based plaster suited to older, solid-walled homes.

Building in Larne

Belfast has long rows of red-brick Victorian terraces, Edwardian villas in the north and south of the city and large post-war estates, while towns such as Ballymena, Antrim, Larne and Carrickfergus mix terraces, semis and newer developments. Dark basalt appears in older rural buildings, and pebbledash or roughcast is a very common finish.

The north coast and glens are exposed to strong winds, salt and frequent rain, which affects render, roofline and outdoor work.

These patterns matter for plastering and skimming: older walls, roofs and floors in Larne can need different materials or extra preparation compared with newer homes.

Planning and building rules in Larne

The notes below cover Northern Ireland, which is where Larne sits. Rules change and every property is different, so we speak to the council before pricing your job.

Internal improvements do not need planning permission in Northern Ireland unless the building is listed.

The Building Regulations (Northern Ireland) apply to structural work, drainage and ventilation; electrical work should be tested and certified.

Rules change and every property is different, so we check the planning history and constraints for your address before we quote.

How does the job run?

  1. We look at the job

    It starts with a survey at the property, free of charge. We check condition, access and services, ask how you want the finished result to look, and answer any questions you have about plastering and skimming.

  2. Price and scope agreed

    The quote arrives in writing, not over the phone. It covers the full scope, the finishes you've chosen, any exclusions and the payment schedule, with a fixed price tied to that specification.

  3. Dates and permissions

    With the quote agreed, we book the work in and handle preparation: permissions where needed, building control notifications, material orders and access arrangements for your Larne property.

  4. Build and hand over

    On site, the agreed plan is followed and any change is put in writing first. At completion we do a final clean, go through the snagging list with you and leave you with the relevant documents.

Why homeowners choose us

Free site surveyWe visit your home to measure up and discuss the work at no cost, and there is no obligation to go ahead once you have our price.
Guide prices shown upfrontYou can see typical price ranges, including VAT, before you contact us, so you can judge whether a project fits your budget.
Permissions checked firstWe check whether planning permission or building control approval is needed for your property, and handle applications and notices where they apply.
Coverage across the UKWe take on projects in England, Wales, Scotland and Northern Ireland, and plan each one under the rules for the nation it is in.

Questions about plastering and skimming in Larne

Can you plaster over artex?

Artex and similar textured ceilings can usually be covered, either by applying a bonding coat and then a skim, or by fixing new plasterboard over the top and skimming that. Some older textured coatings contain hazardous fibres, so they should not be sanded or scraped until a sample has been tested. We can arrange a test before quoting and choose a method that avoids disturbing the coating.

How long does new plaster take to dry?

A skim coat usually dries in a few days in a warm, well-ventilated room, while a full re-plaster can take one to four weeks depending on its thickness and the weather. Plaster turns from dark brown to an even light pink when dry. Keep windows open where possible, but avoid blasting heaters, which can cause cracking. We advise on drying before you decorate.

How long will plastering and skimming take?

On a typical home, allow 1–3 days per room, plus drying time. Larger projects, older buildings and extra work found once things are opened up can extend that, while simpler jobs may be shorter. Your quote includes an estimate of time on site, and your point of contact keeps you updated on the programme as the work progresses.

Is the price fixed?

Yes, for the specification we agree. Your written quote sets out exactly what is included at a fixed price. It only changes if you ask for something different, or if a problem the survey could not reasonably reveal later needs extra work. In either case we explain the change and confirm it in writing before going ahead.

Why is my plaster cracking?

Fine cracks in new plaster are usually shrinkage cracks from drying too fast and are easily filled before decorating. Cracks along plasterboard joints often mean missing tape or movement in the boards. Larger or diagonal cracks over doors and windows can point to structural movement and should be looked at before re-plastering. We assess cracks during the survey and explain the likely cause.

Near Larne

Whether you're in the centre of Larne or on its outskirts, BT40 addresses are covered. We extend the same service, and the same fixed-price approach, to Carrickfergus, Newtownabbey and Bangor, County Down.

Planning plastering and skimming in Larne?

Not sure of your budget yet? Try our guide-price tool for plastering and skimming, then book a free survey in Larne when you want a firm figure.

Call freeFree quote