Plastering is applying a smooth finishing coat of plaster to walls and ceilings, either as a thin skim over sound surfaces or as a full re-plaster after removing failed plaster, creating a flat surface ready for decoration.
We offer plastering and skimming across Kent, and Strood is one of the places we cover, along with nearby Rochester, Chatham and Gillingham. Before anything is agreed we visit, check the existing structure and talk through your options. You then receive a written quote setting out the full scope; for most homes in the South East it sits within £600–£1,800 including VAT.
- Guide price
- £600–£1,800 inc VAT
- Time on site
- 1–3 days per room, plus drying time
- Postcodes
- ME2
- Planning rules
- England
- Local area
- Medway
- Survey
- Free, with a written quote
Plastering and skimming prices in Strood
Below is a breakdown of typical costs for plastering and skimming in Strood. Because rates in the South East are about 12% above the national guide, the overall guide comes to £600–£1,800, including VAT. Size, materials and access move the figure, and a free-of-charge survey settles it.
| Type of job | What it usually involves | Guide in Strood |
|---|---|---|
| Patch repairs or one wall | Repairing cracks, filling cable channels after a rewire or skimming a single wall. | £150–£550 |
| One room, walls and ceiling | Skimming or boarding and skimming the walls and ceiling of a typical room. | £600–£1,800 |
| Whole house | Skimming or re-plastering most rooms in a typical 3-bed house during a renovation. | £5,600–£13,500 |
What moves the price up or down:
- Total wall and ceiling area to be plastered
- Skim over sound plaster or full re-plaster back to brick
- Ceiling height, stairwells and access
- Removing artex, wallpaper or failed plaster first
What’s included?
- Floor and furniture protection with dust sheets and masking
- Removal of loose or failed plaster and old wallpaper
- Plasterboard fixed to ceilings or walls where needed
- Angle beads and stop beads for straight corners and edges
- Skim coat or full two-coat plaster to agreed areas
- Waste removal and a tidy finish ready for decorating
What are homes like around Strood?
Kent's older buildings include oast houses, weatherboarded cottages, Wealden timber-framed houses and Kentish ragstone walls. Medway towns have long rows of Victorian terraces, Margate and Ramsgate have Regency and Victorian seafronts, and Ashford, Maidstone and Dartford have seen large new estates alongside interwar and post-war housing.
Victorian terraces suit loft rooms and rear extensions; weatherboarded and timber-framed buildings may need cladding repairs and lime work. Newer estate homes often take garage conversions, porches and landscaping.
None of this holds for every street in Strood, which is why we look at your actual house before pricing plastering and skimming rather than assuming from its age alone.
Do you need permission in Strood?
Homes in Strood come under the regulations for England, summarised below. We don't rely on general rules alone: we confirm the position for your address with the council before a quote goes out.
Internal work such as a new kitchen, bathroom, flooring, plastering or decorating does not need planning permission in England, unless the house is listed, when listed building consent may be needed even for internal changes.
Some internal work is covered by Building Regulations: new electrical circuits and work in bathrooms (Part P), new drainage, structural changes, extractor ventilation and any new window. Notifiable work is certified by a registered installer or by building control.
Rules change and every property is different, so we check the planning history and constraints for your address before we quote.
From survey to handover
A visit to your home
A free survey comes first. It gives us what we need to price plastering and skimming properly, including dimensions, existing materials and access for deliveries, and gives you the chance to ask anything you like.
Quote in writing
We turn the survey notes into a written quote. The price is fixed for the specification we agree, and the document sets out materials, scope and payment stages in plain language.
Booking the work
Next comes planning the work itself. We set a start date that suits you, line up the right trades, and make sure any approvals for plastering and skimming are in place before the first day on site.
On site to finish
Work goes ahead as scheduled and you deal with one contact throughout. When the last trade leaves, we clear and clean the site, talk you through what has been done and pass on any certificates and care instructions.
How we work
Questions about plastering and skimming in Strood
Can you combine plastering and skimming with other work?
Yes. Because we manage several trades under one contract, we can plan plastering and skimming alongside other work on your Strood home, such as new windows with rendering, or a kitchen refit with an extension. Combining jobs can reduce repeat set-up such as scaffolding, skips and access, and every element is listed and priced in the same written quote.
How messy is plastering?
Plastering is wet work, so some mess is unavoidable, but good protection keeps it under control. We cover floors with dust sheets, mask sockets, switches and skirting, and move or cover furniture. Removing old plaster creates the most dust, so we seal doorways and keep the area ventilated. At the end, we clear waste and leave the room tidy and ready for decorating.
When can I paint new plaster?
New plaster can be painted once it is fully dry and evenly pale in colour. The first coat should be a mist coat, which is watered-down emulsion or a specialist primer that soaks into the plaster and seals it. Applying normal emulsion straight on can cause peeling. Vinyl or wipeable paints should be avoided for the first coat, because they stop moisture escaping.
Can you plaster over artex?
Artex and similar textured ceilings can usually be covered, either by applying a bonding coat and then a skim, or by fixing new plasterboard over the top and skimming that. Some older textured coatings contain hazardous fibres, so they should not be sanded or scraped until a sample has been tested. We can arrange a test before quoting and choose a method that avoids disturbing the coating.
Who do I deal with during the job?
One point of contact manages your project from survey to handover. They schedule the trades working under our contract, keep you updated on progress, and are the person to call with any question. You don't need to coordinate builders, electricians or decorators separately, because that is part of what we do.
Also covering areas around Strood
Homes across ME2 in Strood are within our coverage, as are those in Rochester, Chatham and Gillingham. If you are just outside these areas, ask anyway, because we work right across the UK.